• 펄프종이기술
• /
• 제36권3호
• /
• pp.35-43
• /
• 2004

Reduction of fresh water consumption and effluent discharge provide diverse advantages in raw materials and energy savings. Papermaking system closure, however, reduces the efficiency of additives, decreases retention and dewatering, and causes many other Problems in papermaking. Accumulation of inorganic and organic substances in the process white water is the prime cause of these problems. Understanding of the accumulation phenomena of the detrimental substances in the papermaking process is of great importance for papermaking system closure. In this study a process simulation method was employed to analyze the accumulation phenomena of anionic starch in the process white water as the reuse rate of dry broke and pick up of surface sizing agent is increased. Steady state simulation studies were carried out based on the model developed in previous study. The variation of dissolved starch concentration in each process unit was monitored as a function of reuse rate of dry broke and surface sizing agent pick up rate. The result showed that dissolved starch concentration Increased as reuse rate of dry broke and surface sizing agent pick up rate was increased.

• 한국분말재료학회지
• /
• 제26권6호
• /
• pp.471-476
• /
• 2019

Additively manufactured metallic components contain high surface roughness values, which lead to unsatisfactory high cycle fatigue resistance. In this study, high cycle fatigue properties of selective laser melted Ti-6Al-4V alloy are investigated and the effect of dry-electropolishing, which does not cause weight loss, on the fatigue resistance is also examined. To reduce the internal defect in the as-built Ti-6Al-4V, first, hot isostatic pressing (HIP) is conducted. Then, to improve the mechanical properties, solution treatment and aging are also implemented. Selective laser melting (SLM)-built Ti64 shows a primary α and secondary α+β lamellar structure. The sizes of secondary α and β are approximately 2 ㎛ and 100 nm, respectively. On the other hand, surface roughness Ra values of before and after dry-electropolishing are 6.21 ㎛ and 3.15 ㎛, respectively. This means that dry-electropolishing is effective in decreasing the surface roughness of selective laser melted Ti-6Al-4V alloy. The comparison of high cycle fatigue properties between before and after dry-electropolished samples shows that reduced surface roughness improves the fatigue limit from 150 MPa to 170 MPa. Correlations between surface roughness and high cycle fatigue properties are also discussed based on these findings.

• 한국식품저장유통학회지
• /
• 제4권3호
• /
• pp.265-270
• /
• 1997

Effect of modified atmosphere packaging conditions on quality changes of dry jujube was investigated. Dry jujubes with moisture content of 26.7% were packaged in PET/Al/PE film pouches with modified atmospheres. The tested packages include those with normal air, vacuum, CO2 flushing, N2 flushing and O2 scavenger. Packages were stored at 25$^{\circ}C$ for 6 months, during which ascorbic acid concentration, browning level, titratable acidity and surface color were measured. Generally modified atmosphere packages could improve quality retention of dry jujubes except that vacuum package resulted in large surface color change. CO2-flushed package showed the best quality retention of high ascorbic acid content and low browning during 112 days, but caused high amounts of ascorbic acid destruction and browning in longer storage. In all the modified atmosphere packages titratable acidity reached a maximum followed by decline and subsequent rise, while it increased linearly with time in normal air package. Considering ascorbic acid retention browning level and surface color changes during 112 days, the packages of CO2 flushing and N2 flushing were better than others.

• 음성과학
• /
• 제13권1호
• /
• pp.85-94
• /
• 2006

The aim of this study was to examine the characteristics in duration and amplitude of the submental muscle activities during dry and wet swallowing. We examined the middle suprahyoid muscle activities in 32 normal adult women during three swallowing conditions, that is, dry as well as 5 mL & 10 mL water swallowings, using a surface EMG. From the results, there were significant differences in duration: the longest in dry swallowing and shortest in 5 mL water swallowing. However, the mean amplitude per msec increased as the duration decreased. This may imply motor equivalence in swallowing stating that duration and amplitude are complementary in order to achieve a given swallowing goal.

• 한국표면공학회지
• /
• 제50권5호
• /
• pp.373-379
• /
• 2017

Dry processes like evaporation and sputtering in vacuum chamber are difficult to make a uniform, large area and high quality film on thin PET substrate because of PET degradation and bad adhesion. On the other hand, wet processes like electro or electroless plating have complex processes and require high environmental cost. In this study, we successfully prepared $2{\mu}m$ Zn/Cu/Ni multilayers coated on $12{\mu}m$ polyethylene terephthalate (PET) substrate by using dry-wet mixing processes. Their surface electric resistances were evaluated around $0.2{\Omega}$ by using 4 probe measurements. Furthermore, their corrosion resistance also evaluated by natural potential test and compared with other wet, dry and mixing process samples.

• Journal of Acupuncture Research
• /
• 제29권4호
• /
• pp.55-69
• /
• 2012

Objectives : The aim of this study was to compare the effects of 12 acupuncture treatments versus 24 acupuncture treatments for patients with dry eye syndrome. Methods : We have assessed the symptom score, number of dry eye symptoms, and ocular surface disease index(OSDI) scores before and after the acupuncture treatments. The group A received 12 acupuncture treatments, and the group B received 24 acupuncture treatments. To evaluate the efficacy of acupuncture treatments the before and after scores of both groups were compared. Results : After treatment, symptom score, number of dry eye symptoms, and ocular surface disease index(OSDI) were significantly decreased in each group (p<0.001). The symptom score has shown a greater decrease in group B than group A, but no significant differences were seen in the numbers of existing symptoms and ocular surface disease index(OSDI) scores between the two groups. Conclusions : Acupuncture is an effective way to relieve the symptoms of dry eye syndrome. The more number of acupuncture treatments may be correlated with better outcomes in the means of symptom score.

• 조명전기설비학회논문지
• /
• 제29권6호
• /
• pp.49-57
• /
• 2015

This paper presents the discharge characteristics and economic feasibility of a Dry $Air/O_2$ and a $N_2/O_2$ mixture gas in order to review $SF_6$ alternative. From AC discharge experiment in an quasi-uniform field, it was found that the optimal $N_2/O_2$ mixing ratio which breakdown voltage and surface flashover voltage were the highest was 70/30 and that the pressure dependence on the breakdown voltage was higher than that of the surface flashover voltage in the Dry $Air/O_2$ and the $N_2/O_2$ mixture gas. The mixing ratio (70/30) and the tendency of the pressure dependence were described in detail based on physical factors (impact ionization coefficient, electron attachment coefficient, secondary electron emission coefficient) involved in discharge mechanism and a electron source, respectively. In addition, the performance insulation and the economic feasibility of the Dry $Air/O_2$ and the $N_2/O_2$ mixture gas were discussed so that Dry $Air/O_2$ mixture gaswas more suitable than $N_2/O_2$ mixture gas to the $SF_6$ alternative.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.143-144
• /
• 2006

• Journal of Acupuncture Research
• /
• 제27권6호
• /
• pp.85-94
• /
• 2010

Objectives : The aim of this study was to evaluate the effect of acupuncture therapy on dry eye syndrome. Methods : We investigated 43 cases of patients with dry eye syndrome. They were treated with acupuncture therapy twice or three times a week. Symptoms score, number of dry eye symptoms, Ocular surface disease index were compared between eyes before and after treatment to evaluate the efficacy of acupuncture therapy. Results : After 24 times treatment, symptom score, number of dry eye symptoms, Ocular surface disease index were significantly decreased. Conclusions : Acupuncture therapy was effective to improve symptoms of dry eye syndrome patients. There should be more observation about patients with dry eye syndrome and further study will be needed.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.253-254
• /
• 2002

Based on 3-D surface morphology measurements of C.G. irons, the fractal analyses were made on relationship between dry sliding surface morphology and the fractal dimension. It is revealed that the values of fractal dimensions ($D_f$) of sliding surfaces are in the range between 1-2, which are closely related to the surface morphologies. With the increase in depths of grooves or pits, the $D_f$ values increase. At the same time, the increases in densities of the grooves also cause the $D_f$ values to increase. At last, relationship among $D_f$ and friction coefficient as well as wear rate is discussed.