• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.203-209
• /
• 2010

The base asphalt mixtures that used the waste recycle asphalt correcting from the four different overlay construction sites in Seoul city were made using the foamed asphalt method. The sample mixtures were made in different ratio of the recycle asphalt and new asphalt material and the performance of the mixtures of the different ratio was investigated in the laboratory. The laboratory tests includes the Marshall test, the indirect tensile test, the resilient modulus test, the creep test and the wheel tracking test. The test of the recycle foamed asphalt mixtures(RFA) were compared with the those of the recycle hot mix asphalt(RHA) mixtures. The performance of the RFA is comparable to that of the RHA. On the other hand, the indirect tensile strength of the RFA in dry condition is lower than that of RHA and the indirect tensile strength of the RFA in wet condition is much lower than that of the RHA.

• Parasites, Hosts and Diseases
• /
• v.39 no.2
• /
• pp.177-183
• /
• 2001

The objectives of the present study were to (1) determine the susceptibility of Anopheles sinensis to Korean isolates of Plasmodium vivax, (2) establish a method to collect large quantities of P. vivax sporozoites for use as antigen in seroepidemiological studies, and (3) investigate the characteristics of Korean isolates of P. vivax sporozoites. Females of Anopheles sinensis were collected at non-epidemic area, Seokwha-ri, Cheongwon-gun and Chungcheongbuk-do using tent-trap methods coupled with dry ice. The females were artificially infected with gameiocytes of P. vivax using blood obtained from P vivax malaria patients. Individual mosquitoes were infected using either a parafilm-covered glass feeding apparatus or were allowed to feed on naturally infected volunteers. Mosquitoes were sacrificed between 16 and 18 days post-feeding and an enzyme-linked immunosorbent assay (ELISA) was used to detect sporozoites. Four (33.4%) of 12 mosquitoes, which were fed on naturally infected volunteers directly, were positive for sporozoites. In cases, the mosquitoes allowed to feed on whole blood which were extract from three different patients with heparin treated vacuutainers using a parafilm-covered glass apparatus. Two of 55 (3.6%) were positive which blood sample was maintained at room temperature for 8 hours, 1 of 68 (1.5%) was positive which blood was maintained at $4^{\circ}C$ for 24 hours and 1 of 47 (2.3%) was positive at 4$^{\circ}C$ for 48 hours. The mean number of sporozoites was estimated about 818 (n=8; range of 648-1,056) based on optical density values of ELISA.

• Journal of Veterinary Clinics
• /
• v.27 no.2
• /
• pp.142-146
• /
• 2010

The purpose of this study is to establish experimental canine skin barrier disruption model in dog. The study was designed to investigate the predictive properties of acetone damage using as effect parameters transepidermal water loss (TEWL) and stratum corneum (SC) hydration. To compare the structures of SC intercellular lipids in normal and acetone damaged skin, TEM observations were performed. Six clinically normal, male Beagles without dermatological problems were chosen for this study. Acetone damage was performed at 48hrs after clipping. Efficacy measurements for TEWL and skin hydration were performed before ($t_1$) and after ($t_2$) damage in a temperature- and humidity-controlled room ($2{0\sim}22^{\circ}C$, 50-60%). TEWL and SC hydration values were decreased in the acetone damaged model compared with non damaged skin. In TEM observation of acetone damaged sample, the intercellular lipid lamellae exhibit abnormal and incomplete structure compared with those of normal skin. It seems that acetone damage would be one of canine skin epidermal barrier disruption model for the study of canine atopic dermatitis (AD) as well as dry skin in veterinary dermatology research.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.5
• /
• pp.49-55
• /
• 2013

To explore the paper materials for restoration of the Annals of the Joseon Dyansty, durability of the three type of the traditional Korean Papers were estimated in this study, through moist heat artificial aging test. Three types(D, F, and G) which showed the best preservation performance in dry heat and UV treatment in the previous study were selected and artificial accelerated aging treatment with moist-heat process was conducted; the viscosity change rate was D>G>F; folding endurance G>D>F; $L^*$ value F>D>G; $a^*$ and $b^*$ change rate D>G>F; brightness decrease rate D>G>F, suggesting paper F showed the least change rate in physical/optical properties. Also the CLSM image observation showed fair coherence among fibers and confirmed paper mulberry. And in FDI extraction from each sample, paper F showed the highest value. Overall, paper F (traditional glossy paper) showed the highest stability against thermal treatment. It confirms that paper F is suitable as restoration paper for tributary remains including the annals of the Joseon Dynasty for its steady strength/viscosity decrease rate and color change rate.

• The Korean Journal of Mycology
• /
• v.15 no.1
• /
• pp.9-13
• /
• 1987

The qualitative and quantitative analysis of fatty acids in the Korean White Poria cocos(Schw.) Wolf were performed. Dry powder of sample was extracted with chloroform-methanol(2 : 1, v/v) mixed solvent. The extract was saponified and methylated, and then analyzed by gas chromatography. Total 24 peaks were observed in the gas chromatogrom and 5 peaks i.e, $C_{8:0}\:;\:caprylic\:acid$, $C_{11:0}\:;\:undecanoic\:acid$, $C_{12:0}\:;\:lauric\:acid$. $C_{12:1}\:;\:dodecenoic\:acid$ and $C_{16:0}\:;\:palmitic\:acid$ were identified. Major components were $C_{8:0}\:and\:C_{12:1}$ were determined as $6.657\:{\mu}g/g\:and\:10.176{\mu}g/g$ respectively.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.10
• /
• pp.17-25
• /
• 2005

The bender element method is an experimental technique to determine very small strain ($<10^{-3}\%$), elastic shear modulus of a soil, $G_{max}$ by measuring the velocity of shear wave propagation through a sample. Bender elements have been applied as versatile transducers to measure small strain modulus of wet or dry soils in various laboratory apparatus. In this paper, bender element (BE), resonant column (RC) and torsional shear (TS) tests were performed on Toyoura sand at various testing conditions using the modified Stokoe type RC/TS testing equipment capable of performing BE test. Based on the results, applicabilities of the testing method using bender element were evaluated by comparing the values of $G_{max}$ obtained from RC/TS and BE testing methods. For more dependable evaluation, the loading frequency of each testing method was considered for the results obtained for samples in saturated condition by adapting Biot's theory.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.519-524
• /
• 2017

Physical, mechanical and deteriorating properties of Phellodendron amure were investigated. Air dried density located indoor was 0.41 but $0.43g/cm^3$ outdoor. In oven dry shrinkage, T/R ratio for located indoor was 1.40 but 1.32 outdoor. Hygroscopic property at $40^{\circ}C$ with 90% relative humidity was 16.30% for indoor and 15.80% for outdoor. Compressive strength for outdoor conditioned sample was 43.81 MPa but 40.33 MPa for indoor conditioned. Also bending strenght for outdoor conditioned was 84.63 MPa but 68.80 MPa for indoor conditioned. Impact strength was 3.43 and $4.00J/cm^2$ indoor and outdoor, respectively. Hardness at cross-section was 47.92 and 49.20 MPa indoor and outdoor, respectively. With one-year conditioning at indoor or outdoor, there was no significantly different in strength properties, which came from strong resistance for deterioration. Also Phellodendron amure wood showed dimensionally stable raw material based on low T/R ratio.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.5
• /
• pp.431-443
• /
• 2000

The purpose of this experimental study is to investigate seasonal deposition flux variations and deposition velocities of the total dusfall and various inorganic elements in it. Total 41 dustfall and TSP samples were collected from November, 1997 through December, 1998 in Kunsan. Each sample was analyzed by and AAS to determine he levels of 5 inorganic elements: Zn, Cd, Cr, Fe and Pb. Deposition fluxes, soluble/total fractions and deposition velocities for each element were extensively investigated. Estimated dry deposition fluxes of dustfall and elements in Kunsan were in the range of 14.6~48.8(mean 25.6) ton/$\textrm{km}^2$/yr for dustfall, 14.5~72.6(mean 44.1)kg/$\textrm{km}^2$/yr for Zn, 0.9~0.5(mean 3.0) kg/$\textrm{km}^2$/yr for Cd, 2.1~239.2(mean 63.9) kg/$\textrm{km}^2$/yr for Cr, 331.6~1,082.7(mean 873.9) kg/$\textrm{km}^2$/yr for Fe, 5.2~178.4(mean 49.2) kg/$\textrm{km}^2$/yr for Pb, respectively. And the concentra-tion of TSP and elements in Kunsan were 71$\mu\textrm{g}/m^3$ for TSP, $29.9ng/m^3$ for Zn, $0.6ng/m^3$ for Cd, $0.1 ng/m^3$ for Cr, $1,061.0 ng/m^3$ for Fe, $4.0 ng/m^3$ for Pb, respectively. And the estimated deposition velocity of dustfall and elements in Kunsan were 1.13$\times$ 10(sup)-2 cm/sec for dustfall, 4.67$\times$ 10(sup)-2 cm/sec for Zn, 16.92 cm/sec for Cd, 15.69 cm/sec for Cr, 1.72$\times$ 10(sup)-2 cm/sec for Fe, 0.36 cm/sec for Pb, respectively.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.2
• /
• pp.204-211
• /
• 2011

To yield high concentrations of protein expressed by genetically modified Escherichia coli, it is important that the bacterial strains are cultivated to high cell density in industrial bioprocesses. Since the expressed target protein is mostly accumulated inside the E. coli cells, the cellular product formation can be directly correlated to the bacterial biomass concentration. The typical way to determine this concentration is to sample offline. Such manual sampling, however, wastes time and is not efficient for acquiring direct feedback to control a fedbatch fermentation. An E. coli K12-derived strain was cultivated to high cell density in a pressurized stirred bioreactor on a pilot scale, by detecting biomass concentration online using a capacitance probe. This E. coli strain was grown in pure minimal medium using two carbon sources (glucose and glycerol). By applying exponential feeding profiles corresponding to a constant specific growth rate, the E. coli culture grew under carbon-limited conditions to minimize overflow metabolites. A high linearity was found between capacitance and biomass concentration, whereby up to 85 g/L dry cell weight was measured. To validate the viability of the culture, the oxygen transfer rate (OTR) was determined online, yielding maximum values of 0.69 mol/l/h and 0.98mol/l/h by using glucose and glycerol as carbon sources, respectively. Consequently, online monitoring of biomass using a capacitance probe provides direct and fast information about the viable E. coli biomass generated under aerobic fermentation conditions at elevated headspace pressures.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.36 no.3
• /
• pp.223-236
• /
• 2016

The objective of this study was to construct Italian ryegrass (IRG) dry matter yield (DMY) estimation models in South Korea based on climatic data by locations. Obviously, the climatic environment of Jeju Island has great differences with Korean Peninsula. Meanwhile, many data points were from Jeju Island in the prepared data set. Statistically significant differences in both DMY values and climatic variables were observed between south areas of Korean Peninsula and Jeju Island. Therefore, the estimation models were constructed separately for south areas of Korean Peninsula and Jeju Island separately. For south areas of Korean Peninsula, a data set with a sample size of 933 during 26 years was used. Four optimal climatic variables were selected through a stepwise approach of multiple regression analysis with DMY as the response variable. Subsequently, via general linear model, the final model including the selected four climatic variables and cultivated locations as dummy variables was constructed. The model could explain 37.7% of the variations in DMY of IRG in south areas of Korean Peninsula. For Jeju Island, a data set containing 130 data points during 17 years were used in the modeling construction via the stepwise approach of multiple regression analysis. The model constructed in this research could explain 51.0% of the variations in DMY of IRG. For the two models, homoscedasticity and the assumption that the mean of the residuals were equal to zero were satisfied. Meanwhile, the fitness of both models was good based on most scatters of predicted DMY values fell within the 95% confidence interval.