• Applied Biological Chemistry
• /
• 제38권4호
• /
• pp.353-358
• /
• 1995

옥수수 전분(초기 수분함량 11.4%)을 $130{\sim}220^{\circ}C$에서 건열처리하여 DSC로 열분석한 결과 $190^{\circ}C$이상에서 호화엔탈피는 감소하였고 알칼리호화시 열처리온도가 상승할수록 점도가 증가하였다. $170^{\circ}C$이상에서 열처리 온도가 높아질수록 원료전분에 비하여 최고점도를 포함한 아밀로그램상의 모든 값들, 전분호화액의 전단응력과 겉보기점도, 점조도지수 및 항복응력은 감소하였다. $90^{\circ}C$에서 호화진행에 따라 모든 시료들의 겉보기 점도와 항복응력은 상당히 증가하였으며 $190^{\circ}C$시료는 특히 초기에 급증하였으나, 점조도지수는 약간 증가한 반면에, 유동거동지수값들은 큰 차이를 보이지않았다. 그러나 $220^{\circ}C$의 경우 모든 값들이 다른 시료들에 비하여 크게 낮았다.

• 한국조리학회지
• /
• 제23권4호
• /
• pp.185-192
• /
• 2017

This study examined the optimum conditions and obtained the basic data for processing semi-dried sea cucumber flakes. During the boiling process, the weight and length of the sea cucumber decreased to 45.61% and 55.87%, respectively. Thereafter, there was a gradual decrease in the weight and length of the sea cucumber, which were finally maintained at 30.00% and 50.93%, respectively. The moisture content during drying was 38.37% after 3 hours at $60^{\circ}C$, and 36.56% after 5 hours at $30^{\circ}C$. However, the decrease in moisture content was slowly at 60 hours and $4^{\circ}C$, reaching a final value of 68.9%. The length of boiled sea cucumber during drying decreased to 66.35% after 11 hours at $60^{\circ}C$, and 68.90% after 24 hours at $30^{\circ}C$. The chromaticity and hardness tended to increase during the drying process. Moisture content and water activity of sea cucumber flakes decreased from 81.48% (0.963) to 33.50% (0.763), respectively, after 3 hours at $60^{\circ}C$. Following this, the moisture content and water activity continuously decreased to 30.75% (0.608) at 4 hours and 19.47% (0.437) at 5 hours, respectively. The overall acceptance score was 4.11 and 3.89 for 4 hours dry sample and 5 hours dry sample, respectively. However, the score was not statistically significant.

• Journal of Forest and Environmental Science
• /
• 제38권2호
• /
• pp.90-101
• /
• 2022

The study aims to assess composition, diversity and population indices of natural regeneration of woody species in Jebel El Gerrie forest reserve, Blue Nile State, Sudan. We conducted field work between December 2018 and January 2019. We used random sampling to collect vegetation data in the forest where we made a total of 90 circular sample plots (radius 17.84 m) and distributed them proportionally to the area of each of the four density-based vegetation classes of the forest i.e. high density (C1), medium density (C2), low density (C3) and crop land (C4). In each sample plot we identified all regenerating tree species and counted their regeneration frequencies. We calculated ecological metrics of regeneration frequency, density, abundance, richness, evenness, diversity and importance value index (IVI) and drew abundance rank curve. Results revealed that out of fifteen mature tree species present, natural regeneration of 8 species, which belong to 6 families, was observed. The relatively most frequently naturally regenerating and abundant species were Anogeissus leiocarpa and Combretum hartmannianum. Richness, evenness and diversity of regenerating species were 1.33, 0.82 and 1.7, respectively. One-way ANOVA (α=0.05) of mean regeneration densities disclosed that there were significant differences (F_3,86=16.77, p=0.000) between C2 & C3 (p=0.000) and C2 & C4 (p=0.000). While regeneration of seven tree species were absent, two, two and four species were of good, poor and fair regeneration status, respectively. A comparison of mean density of natural regeneration with that of parent trees reflects a poor regeneration status of the forest. The study provides empirical results on the regeneration status of species and signifies the need for management interventions for species conservation and restoration, maintenance of biodiversity and sustainable production.

• Computers and Concrete
• /
• 제31권5호
• /
• pp.395-403
• /
• 2023

The paper investigates the effect of two parameters - sand content (SC) and grain migration during shearing - on the mechanical properties of gravel-sand mixtures. Consolidated undrained (CU) triaxial tests were carried out on eight series of mixtures containing gravel (1<d<16 mm) and sand (0.1<d<1 mm). The prepared mixtures have sand contents of 0, 10, 15, 20, 40, 54, 94 and 100%, and a relative density of 60%. The transition sand content (TSC) is experimentally defined and marks the transition from gravel-driven to sand-driven behavior. For SC<TSC, the dry density of the mixture increases with SC. This induces an increase in undrained peak strength and dilative trend. The slope and position of the critical state line (CSL) are also deeply dependent on SC. At SC=TSC, the mixtures exhibit the largest dry density and yield the highest undrained peak strength and the largest dilative trend. During shearing, large internal migration of grains was observed at the TSC, causing heterogeneity in the sample. Analysis of the CSL deduced from the final points of the triaxial tests shows that, at the TSC, failure appears to correspond to the behavior of the coarsest fraction of the soil. This fraction is located in the upper part of the sample, where the sand particles had been eliminated by suffusion. On the other hand, in the more stable materials, the CSL is consistent with the bulk grain size distribution of the soil.

• 공업화학
• /
• 제34권1호
• /
• pp.30-35
• /
• 2023

TiO₂ 졸을 사용하여 유리알 표면에 TiO₂ 코팅한 후 건조 처리한 시료(TB)와 소성한 시료(TBc)를 제조하였다. 이들 시료에 대한 TiO₂ 박막의 특성분석과 메틸렌블루 및 톨루엔의 광분해 실험을 수행하였다. FE-SEM, XPS 및 FTIR 분석 결과, TB 시료의 TiO₂ 박막은 스펀지 폼과 같은 형태이며 무정형 TiO₂와 일부 결정형 TiO₂가 존재하였다. TBc 시료의 TiO₂ 박막에는 결정형 TiO₂가 주로 존재하며 침상형 입자와 미세 입자들이 혼재하였다. TBc 시료(46 mg/g)의 톨루엔 흡착량은 같은 코팅량의 TB 시료 대비 적었으나 톨루엔 분해율은 비슷했다. TB 시료의 경우, TiO₂ 코팅량이 증가함에 따라 톨루엔 분해능이 흡착능에 비해 적게 감소하였다. 이러한 결과는 소성하지 않은 TB 시료는 TiO₂ 코팅량이 증가하면 무정형 텍스처의 비표면적은 감소하는 반면 결정성 입자들의 활성점 감소는 적게 일어나기 때문으로 판단된다.

• 한국식품조리과학회지
• /
• 제7권3호
• /
• pp.69-76
• /
• 1991

6종류의 식용 버섯에 함유되어 있는 dietary fiber를 Southgate방법, NDF방법, FRI방법으로 측정한 결과는 다음과 같았다. 식용 버섯 중에 함유되어 있는 dietary fiber를 Southgate방법, NDF방법, FRI방법으로 측정한 결과는 각각 $20.08\pm1.45g$/100g dry weight, $20.24\pm1.85g$/100g dry weight, $27.5\pm2.7g$/100g dry weight이었고, 세가지 실험 방법간의 측정치 차이를 보면, 대체로 Southgate방법과 NDF방법과는 유의적인 차이가 없었던 반면, FRI방법과는 유의적인 차이가 크게 나타났다. 버섯중의 dietary fiber성분 비율은 Southgate방법에 의 한 water-soluble fiber성분이 1.7~3.1%, hemicellulose가 47.0~66.6%, cellulose가 28.4~57 7%, lignin 0.9~3.3%였고, NDF방법에 의해 측정한 hemicellulose는 61.8-79.1%, cellulose는 5.4~32.7%, lignin은 4.5~15.5% 였다. 일반적으로 버섯류의 dietary fiber성분은 hemicellulose가 가장 많았고 그 다음으로 cellulose가 많이 함유되어 있었다. Dietary fiber와 crude fiber의 함량비 (DF/CF)는 2~4배 정도로 dietary fiber가 높았다.

• 한국농공학회지
• /
• 제21권2호
• /
• pp.81-103
• /
• 1979

The weathered granite soil involves problems in its stability in soil structures depending upon the reduction of soil strength due to the water absorption, crushability, and content of colored mineral and feldspar. As an attemt to solve the problems associated with soil stability, the crushability of weathered granite soil was investigated by conducting tests such as compaction test, CBR test, unconfined compression test, direct shear test, triaxial compression test, and permeability test on the five soil samples different in weathering and mineral compositions. The experimental results are summarized as follows: The ratio of increasing dry density in the weathered granite soil was high as the compaction energy was low, while it was low as the compaction energy was increased. The unconfined compressive strength. and CBR value were highest in the dry side rather than in the soil with the optimum moisture content, when the soil was compacted by adjusting water content. However, the unconfined compressive strength of smples, which were compacted and oven dried, were highest in the wet side rather than in soil with the optimum moisture content. As the soil becomes coarse grain, the ratio of specific surface area increased due to increased crushability, and the increasing ratio of the specific surface area decreased as the compaction energy was increased. The highest ratio of grain crushability was attained in the wet side rather than in the soil with the optimum moisture content. Such tendency was transforming to the dry side as the compaction energy was increased. The effect of water on the grain crushability of soil was high in the coarse grained soil. The specific surface area of WK soil sample, when compacted under the condition of air dried and under the optimum moisture content, was constant regardless of the compaction energy. When the weathered granite soil and river sand with the same grain size were compacted with low compaction energy, the weathered granite soil with crushability had higher dry density than river sand. However, when the compaction energy reached to certain point over limitation, the river sand had higher dry density than the weathered granite soil. The coefficient of permeability was lowest in the wet side rather than in the optimum moisture content, when the soil was compacted by adjusting soil water content. The reduction of permeability of soil due to the compaction was more apparent in the weathered granite soil than in the river sand. The highly significant correlation coefficient was obtained between the amount of particle breakage and dry density of the compacted soil.

• 한국축산식품학회지
• /
• 제38권4호
• /
• pp.823-828
• /
• 2018

The purpose of this study was to evaluate the suitability of the released water (RW) method for measuring water-holding capacity (WHC) by pressure and filter-paper absorption within two thin plastic films. One hundred fifty pork loins with considerable variations in WHC (three pork qualities: PSE, pale, soft, and exudative; RFN, reddish-pink, firm, and nonexudative; and DFD, dark, firm, and dry; 50 pork loins in each pork quality group) were used to measure drip loss (DL)% and RW % after applying different loads (1.5, 2.0, 2.5, 3.0 and 3.5 kg). Percentages of DL and RW were significantly (p<0.05) different among pork quality groups. The RW % of 2.5 kg load sample was significantly (p<0.05) higher than that of 2.0 kg or 1.5 kg load sample. However, there were no significant (p>0.05) differences in RW % among 2.5 kg, 3.0 kg, and 3.5 kg load samples for all three pork quality groups. The RW % was highly and positively correlated (r>0.95; p<0.001) with DL %. The highest correlation was observed between DL % and RW % of 2.5 kg load sample (r=0.97; p<0.001). Among all RW loads within each quality groups, the highest correlation between DL % and RW % was observed for 2.5 kg load sample (r=0.43, 0.66, and 0.46 for PSE, RFN and DFD quality groups, respectively, p<0.001). These results imply that applying 2.5 kg load is the best for determination of RW %. It is recommended as a reference method to assess DL % of pork muscles.

• Tribology and Lubricants
• /
• 제36권4호
• /
• pp.244-252
• /
• 2020

Materials manufactured by powder metallurgy (PM) are widely used in various applications such as water pump, shock absorber, and airplane components due to the reduction in the cost and weight. In this study, tribological properties of carbon steel subjected by surface treatment were investigated. The main purpose is to increase the strength and improve the tribological properties by reducing pores that formed by PM. Moreover, the surface treatment was carried out at room and high temperatures (RT and HT). The surface roughness of the untreated (NON) and treated (AFTER) samples was measured. It was found that the surface roughness was reduced after both the RT AFTER and HT AFTER compared to RT NON sample. The tribological properties of the samples were performed against bearing steel ball under dry conditions. The friction coefficient of the RT NON samples was reduced by 22% and 56% RT AFTER and HT AFTER, respectively. The wear volume of the RT NON sample was also reduced by 43% and 87% RT AFTER and HT AFTER, respectively. Tribocorrosion tests were also performed and it was found that the surface of the RT AFTER, HT AFTER samples was less corroded compared to RT NON sample. The HT AFTER sample demonstrated a relatively higher corrosion potential in comparison with the RT AFTER samples. Hence, it was confirmed that after surface modification the surface roughness and hardness of the samples were significantly improved resulting in improvement in tribological and tribocorrosion behaviors of PM carbon steel.

• 동의신경정신과학회지
• /
• 제18권1호
• /
• pp.185-196
• /
• 2007

Objective : This experimental Study was designed to investigate the effects of FOENICULI FRUCTUS(FF) on the change of inhibition lactate dehydrogenase(LDH) activity in neuronal cells and cytokines production in serum of cerebral ischemic rats. Method : FOENICULI FRUCTUS(FF)freeze dry powder and FF on the LDH activity in neuronal cells. Changes of FF on the physiological parameters(PaO2, PaCO2, MABP and HR) in crerbral ischemic rats. Effects of FF on the IL-1beta production, $TNF-{\alpha}$ production, $TGF-{\beta}$ production, and IL-10 in serum of cerebral ischemic rats. MCAO :. cytokines production of serum by drawing from femoral arterial blood after MCAO 1 hr. Reperfusion : cytokines production of serum by drawing from femoral arterial blood after reperfusion 1 hr. Results and Conclusion : 1. FF did not inhibit lactate dehydrogenase(LDH) activity in neuronal cells. 2. In serum by drawing from femoral arterial blood after middle cerebral arterial occlusion(MCAO) 1 hr and reperfusion 1 hr, sample group was significantly decreased $IL-l{\beta}$ production compared with control group 3. In serum by drawing from femoral arterial blood after MCAO 1 hr and reperfusion 1 hr, sample group was significantly decreased $TNF-{\alpha}$ production compared with control group. 4. In serum by drawing from femoral arterial blood after MCAO 1 hr and reperfusion 1 hr, sample group was significantly increased $TGF-{\beta}$ production compared with control group. 5. In serum by drawing from femoral arterial blood after reperfusion 1 hr, sample group was significantly increased IL-10 production compared with control group. This results were suggested that FF had inhibitive effect on the brain damage by inhibited LDH activity, $IL-l{\beta}$ and $TNF-{\alpha}$production, but accelerated $TGF-{\beta}$ production and IL-10 production.