• 에너지공학
• /
• 제25권1호
• /
• pp.76-85
• /
• 2016

본 연구에서는 병참연료인 가솔린을 연료프로세서의 연료로 선택하여 광범위한 온도범위에서도 적용가능한 시동 및 제어 전략을 제시하였다. 가솔린 연료프로세서는 시동 초기 단계에서 연소 방식으로 상온상태의 자열개질기 촉매를 라이프온도까지 가열시킨다. 안정적인 가솔린-공기 혼합기체의 점화를 위하여 유동방향 기준 촉매 하단에 글로우 플러그를 설치하였다. 자열개질기가 촉매반응을 시작하면 가솔린 연료프로세서의 개질기는 정상상태까지 POX 모드, 부분 ATR 모드, 완전 ATR 모드 순으로 운전된다. 최종적으로 확립된 시동 및 제어 전략은 상온 및 저온 환경에서 가솔린 연료프로세서의 실제 실험을 통해 타당성을 확인하였다. 그 결과 가솔린 연료프로세서는 상온 및 저온에서 40분 이내에 정상상태에 도달하여 수소 37 ~ 42 vol.%(dry basis), 일산화탄소 0.3 vol.%의 개질가스를 생성할 수 있었다.

• Design & Manufacturing
• /
• 제14권4호
• /
• pp.17-24
• /
• 2020

Products for heating indoors in low temperature and dry winter are largely divided into products using fossil fuels and products using electricity. The fossil fuels can warm the entire space by convection, but there is a high risk of fire and the frequent ventilation due to the increase in carbon monoxide and carbon dioxide. Heaters using electricity are mainly used because they are convenient to use and are cheap. However, these products can not efficiently warm the air because they use radiation energy. In other words, only the front part exposed to the heater is warm, and the rear part has no heating effect at all. Also, because it emits a large amount of light, fatigue of the eyes is very high. Another problem is that when using electric heaters, the room tends to be dry by high heat. Indoor humidity maintenance is a very important factor in the prevention and treatment of respiratory diseases. Especially, it is essential for health care for infants, bronchial organs and people with weak respiratory because humidity is low in winter. In this study, we conducted a study to develop a product that can improve heating efficiency while maintaining proper indoor humidity by combining heat energy and moisture particles. The concept of humidification and heating at the same time, moisture particles generated in the humidifier pass through the heater, include thermal energy, and the moisture particles with thermal energy are diffused into the space by forced convection, thereby warming the entire space. In addition, the heating time is shortened as the feeling temperature is increased with the high relative humidity, and this has the effect that the heating cost in winter is reduced.

• Journal of Biosystems Engineering
• /
• 제32권1호
• /
• pp.13-19
• /
• 2007

Storage rough rice in low temperature using the winter cold air avoids rough rice temperature increase which happens from early May, and this is possible by installing a cooling system in the top of a bin, the room between top rice level and bin ceiling. The research objective is to establish low temperature rough rice storage technique, furnishing winter cold air to rough rice, by investigating the cooling system potential of maintaining low rough rice temperature and by analyzing rough rice storage characteristics over a storage period. The rough rice storage characteristics were evaluated from January to August 2003, using a storage and dry bin of 400-ton capacity. Results of this research are as follows: Cooling bin using the cooling system in the top of the bin maintained the rice temperature less than 15$^{\circ}C$ in entire portions in August. Moisture contents and germination rates of rough rice were decreased over the storage period, on the other hand, the rough rice stored in the ambient temperature bin had relatively lower moisture contents and germination rates to compare with the bin using winter cold air. Crack ratio and acid value of brown rice in the ambient temperature bin storage had increased more than the cooling bin storage. The result indicates that the storage bin using winter cold air and the cooling system maintains moisture content and germination of rice, minimizes cracked kernel and acid value, and preserves rice quality as well.

• 한국잡초학회지
• /
• 제15권3호
• /
• pp.183-187
• /
• 1995

갯드렁새 종자의 저장조건별 발아특성을 조사하여 연중 균일한 종자의 발아율을 유지시키면서, 이들을 방제할 수 있는 약제의 개발을 위한 실험종자로 이용하고자 일련의 실험을 수행한 결과는 다음과 같다. 1. 종자의 발아유기에는 저온습윤처리가 효과적이었으며 1개월 처리시 80% 이상의 종자가 발아되었다. 2. 실온건조저장된 종자는 2주일간의 저온습윤 처리로 70% 이상이 발아되었다. 3. 갯드렁새 종자의 발아율은 항온조건 보다 변온조건에서 높았으며 최적 발아온도는 35/$25^{\circ}C$의 변온조건이었다. 4. 갯드렁새 종자는 강피에 비하여 내염성이 현저하게 높았다. 강피는 0.5%의 NaCl 농도에서 거의 발아되지 않았으나 갯드렁새는 1.0%에서도 60% 이상의 발아율을 나타내어 간척지에서의 발아에 보다 유리하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.822-824
• /
• 1998

The lithium polymer battery with polymer electrolyte is expected as a safe and long cycle life battery. This paper reports primarily the recent development results of a solid polymer electrolyte, which is a key point of the secondary battery system. The new type of polymer electrolyte was prepared under a dry Ar atmosphere by dissolving $LiCIO_4$ in a matrix of EC, PC and then dispersing polyacrylonitrile(PAN). Also adding some inorganic filler $Al_2O_3$. The dispersed solution heated at $120^{\circ}C$. The polymer electrolyte were characterized by EIS(Electrochemical Impedance Spectroscopy), TGA(Thermo Gravimetric analysis), DMA(Dynamic Mechanical Analyzer), DSC (Differential Scanning Calorimetry). The lithium ion yield is 0.29 when PAN-$Al_2O_3$ which was applied DC 5mV. The ionic conductivity of PAN, PAN-$Al_2O_3$ polymer electrolytes were showed $1.0{\times}10^{-4}S/cm$, $8.4{\times}10^{-4}S/cm$ at room temperature. When inorganic filler was added in the polymer electrolyte, ionic conductivity and lithium yield more larger than without inorganic filler.

• 대한금속재료학회지
• /
• 제50권10호
• /
• pp.729-734
• /
• 2012

This study investigated the effect of water absorption on the tensile properties of carbon-glass/epoxy hybrid composites at room temperature and $-30^{\circ}C$. To investigate the effect of the position of glass fabric in the hybrid composite on the tensile properties, the stacking pattern of the fiber fabrics for reinforcing was created in three different ways: (a) glass fabrics sandwiched between carbon fabrics, (b) carbon fabrics sandwiched between glass fabrics and (c) alternative layers of carbon and glass fabrics. They were manufactured by a vacuum-assisted resin transfer molding (VARTM) process. The results showed that there was surprisingly little difference in tensile strength at the two different temperatures with dry and wet conditions. However, the water absorption into the hybrid system affected the tensile properties of the hybrid composites at RT and $-30^{\circ}C$. When the glass fabrics were at the outermost layers, the hybrid composite had the lowest tensile properties. This is attributed to the fact that the composite had a relatively high water absorption rate.

• Journal of Biosystems Engineering
• /
• 제28권5호
• /
• pp.411-420
• /
• 2003

Physical and cultural properties were investigated on the rice-seed pellets made by the pelleting machine(Yu, 2003) as the changes with mixing ratios of soil to rice seed of 6 : 1, 7 : 1, and 8 : I, and rotating speeds of forming rolls of 7, 10, and 13 rpm. Average weight, average diameter, and average sphericity of the pellets were 1.70 g, 12.0 ㎜, and 99.1 ％, respectively. Average number of seeds per pellet was more than 3, and almost all pellets had more than 3 seeds in the cases of mixing ratios of 6 : 1, and 7 : 1 at the forming rolls' speed of 7 rpm. Gradual drying was needed because rapid drying caused cracks on surface of the pellets. Compression strength of the pellets dried in shady room was in the range of 132 ∼ 152 N, which was enough for handling. Comparing with the previous pellets(Park, 2002), average number of seeds per pellet, ratio of pellets including more than 3 seeds, and compression strength increased due to the effects of pressure feed of pellet materials, and improvements of the forming rolls. Emergence ratio of the pellets made at the mixing ratio of 6 : 1 and the forming rolls' speed of 7 rpm, was 100 % on dry paddy and was 97 % on flooded paddy surface. Good growth characteristics, and yield except number of seedling stand and ratio of missing plant were shown in planting of the pellets made at the mixing ratio of 7 : 1 and the forming rolls' speed of 7 rpm on flooded paddy surface field. Considering the cultural results, the mixing ratio of 6 : 1, and the forming rolls' speed of 7 rpm seems to be optimum operating condition for the improved pelleting machine.

• KIEAE Journal
• /
• 제16권4호
• /
• pp.41-46
• /
• 2016

Purpose: This is a study on the planning of temporary housing for post application of Mega Sports facilities. The subject of the study is 2018 Pyeongchang Winter Olympics, which is to suggest building an alternative temporary housing using shipping containers(high cube), which solve the lack of accommodations and recycle temporary housing after Olympics, save money and be eco-friendly in Olympics. Method: This study includes this ; research on the a fact-finding survey about Mega sports facilities post application and demand survey on 2018 Pyeongchang Winter Olympics accomodations and an analysis about temporary housing plan. Furthermore we decided temporary housing building plan by analyzing residents' needs and traits of the housing etc. Through this, we made a schematic design for household units. Result: As a result, this study is a plan of making space, forms, and structure. The planned size is $38.4m^2$(L:12m, W:3.2m) except balcony, and indoor height is 2.5m. The space consists of entrance, bathroom, bedroom and living room with folding furniture system. Also there's a detailed floor plan of the ceiling, wall, and floor we drew up. The ceiling and wall consist of dampproof film, noncombustible board, fire proof urethane form, and color-designed sheet. The floor is composed of floor tile, cement mortar, light concrete(with heat coil), insulation, and dampproof film. Additionally, this study is a plan of interior dry wall with detail using modular construction method for work efficiency and quality improvement.

• 반도체디스플레이기술학회지
• /
• 제23권1호
• /
• pp.92-96
• /
• 2024

The application of the technology for forming Al₂O₃ thin films using ALD(atomic layer deposition) method is rapidly increasing in the semiconductor and display fields. In order to increase the efficiency of the ALD process in a mass production line, metallic by-products generated from the ALD process chamber must be effectively collected. By collecting by-products flowing out of the chamber with a cold trap device before they go to the vacuum pump, damage to the vacuum pump can be prevented and the work room can be maintained stably, resulting in increased process flow rate. In this study, a cold trap was installed between the ALD process chamber and the dry pump to measure and analyze by-products generated during the Al₂O₃ thin film deposition process. As a result, it was confirmed that Al and O elements were discharged, and the collection forms were two types: bulk and powder. And the binding energy peaked at 73.7 ~ 74.3 eV, the binding energy of Al 2p, and 530.7 eV, the binding energy of O 1s, indicating that the binding structure was Al-O.

• 가정과삶의질연구
• /
• 제24권1호
• /
• pp.159-179
• /
• 2006

Each ethnic group has different cultural backgrounds and each culture has developed with its own traditions. The interaction between different cultures is getting more active through acculturation and cultural contacts. The purpose of this study was to compare domestic living of Korean immigrants with Australians in the form of a Cross-Cultural study. For this, usage of domestic space and seating style of 52 Korean households and 53 Australian households in Melbourne were analyzed. Ethnographic research with questionnaire was used. The results of the research were as follows. 1. The most popular type of Living-Dining-Kitchen arrangement was L+ K. D for Koreans and L. D . K for Australians. 2. A laundry room was indispensable for both and they all wanted to do ironing in there as well as dry. Both were satisfied with the type which toilet was separated from the bathroom Drain hole on the floor of the bathroom was not indispensable for most Koreans and Australians. 3. Koreans and Australians were doing various activities in living area and both were getting together around kitchen(dining) area. The particular thing of Koreans was that they were using the main bedroom with multiple purpose. 4. The seating style of Koreans and Australians belong to chair-seating style generally. But Koreans were using floor seating style in making bed for the guest and making Kimchi. Koreans and Australians were using mixed style of floor seating and chair-seating in relaxing time with watching TV, treating guest or so. 5. Koreans were not satisfied with using carpet cause of dust but Australians were satisfied with the carpet cause of warmness. 6. Most Koreans and Australians were take off shoes inside of the house. Koreans were organize shoes around the front door of the house usually and Australians were organize shoes in bedroom usually. 7. The most popular heating system was ducted heating for both. The level of satisfaction about ducted heating was low for Koreans because they though that it could contaminate air. Australians were satisfied with ducted heating because they though that this one was fit on the weather of this area. 8. Living room was the most important one for Koreans and Australians and they also thought it should be decorated well for entertaining guests. Most Koreans were estimate that the brightness of the light of the house was not enough but it was estimated to moderate for Australians on the contrary.