• Korean Journal of Food Science and Technology
• /
• v.52 no.4
• /
• pp.396-402
• /
• 2020

In order to investigate the changes in the quality attributes during the storage of dry-milled rice flour, two flour samples were obtained from two rice varieties (Hangaru (HG), Samkwang (SK)). These samples were stored at 4℃ and room temperature, respectively, and we analyzed the initial rice flour moisture content and chemical properties. The changes in the rice flour pasting and quality properties during storage were measured for 12 months. Our results showed that HG exhibited better pasting properties than SK, while the fat acidity of HG rapidly increased at room temperature, resulting in short shelf-life. However, the low-temperature (4℃) storage of dry-milled rice flour could reduce the change in the free fatty acid values of both samples. Therefore, low-temperature storage seems to contribute not only to an increased rice flour shelf-life by reducing the fatty acid value changes but also to a reduction in the changes in pasting properties.

• Korean Journal of Food Science and Technology
• /
• v.20 no.3
• /
• pp.392-398
• /
• 1988

Gelatinized rice flours were prepared by drum drying at different moisture contents of slurry made from dry milled and wet milled rice flours. Milled rice samples were prepared from the Chuchung and the Samgang varieties. Degree of gelatinization of drum-dried rice flours revealed over 92% at 60% moisture content of wet milled rice flours and 80% moisture content of dry milled ones. With regards to amylogram and rheological properties, drum-dried rice flours prepared from wet milled raw materials showed higher viscosity than from dry milled ones. Increasing water contents in the slurry increased water absorption index(WAI) and decreased water solubility index(WSI). Hunter's color values of drum-dried rice flour at high moisture contents showed higher L values and lower b values. For the preparation of gelatinized rice flours by drum drying process, the higher water content caused more gelatinized network structure of rice starch in scanning electron micrographs. With regards to farinogram properties of dough with drum-dried rice flours and wheat flours in mixing ratio of 1 to 9 by weight, drum-dried rice flours made from wet milled raw rice flours revealed higher MTI than from dry milled ones.

• Korean journal of food and cookery science
• /
• v.31 no.5
• /
• pp.544-550
• /
• 2015

This study investigated the quality characteristics of English muffins made rice flour created using different grinding methods (DPR: powdered type rice flour by dry milling. DSR: soft type rice flour by dry milling. DHR: hard type rice flour by dry milling. WPR: powdered type rice flour by wet milling. WSR: soft type rice flour by wet milling. WHR: hard type rice flour by wet milling). The volume, volume expansion, and specific volume were the highest in WPR. The shape and cross section indicated that WPR, WSR and DPR were the best quality. The L value was the highest in DHR, the b value was the highest in DPR. Hardness, gumminess and chewiness were the lowest in WPR, and the highest in DHR. According to result of the sensory evaluation, the color, flavor, appearance, texture and overall acceptability were the highest in WPR, while the taste preference was the highest in WSR.

• Food Science and Preservation
• /
• v.12 no.3
• /
• pp.230-234
• /
• 2005

This study was carried out to investigate the sensory and physicochemical properties of rice cake(Backsulki) according to milling type and particle size. Moisture contents of rice cake(Backsulki) were $31.9{\sim}34.8\%$ W80(more than $180\;{\mu}m$ rice flour using wet milling) had the highest L value 92.5 and D80(more than $180\;{\mu}m$ rice flour using dry milling) had the lowest L value 79. Degree of gelatinization of rice cake(Backsulki) were $3.8{\sim}6.2\%$ and hardness were decreased as particle size of rice flour decreased Sensory properties of rice cake(Backsulki) with W80 showed the highest score.

• Food Science and Biotechnology
• /
• v.16 no.5
• /
• pp.759-764
• /
• 2007

To investigate the effect of soaking and particle sizes on the properties of rice flour and gluten-free rice bread, wet-milled (WRF, dried at $20^{\circ}C$) and dry-milled rice flours (DRF) were passed through sieves (45 or 100 mesh). Soaking of the rice grains affected the particle size distribution of flour passed through the same size screen. The L and b values of WRF were higher than those of DRF and were not changed with decreasing particle sizes, but DRF increased L and decreased b values. The initial pasting temperatures and setback viscosities of both flours decreased with decreasing particle sizes. The swelling powers at $100^{\circ}C$ increased with decreasing particle sizes in DRF, but maintained in WRF. Starch granules were observed on the surface of flour particles in WRF. The apparent viscosity of WRF paste exhibited 3-5 times higher than that of DRF. Thus, wet milled rice flour with smaller particle sizes (${\phi}<150\;{\mu}m$) showed better properties for making gluten-free rice bread.

• Korean Journal of Food Science and Technology
• /
• v.32 no.4
• /
• pp.799-805
• /
• 2000

In order to manufacture the high-quality products as well as to promote their consumption, dry noodles were prepared with Korean wheat flour and brown glutinous rice flour with and without aroma and quality characteristics of dry noodles were investigated. The average particle size distributions of aromatic brown glutinous rice flour and brown glutinous rice flour ranged from 12.38 to $15.59\;{\mu}m$, which was different from that of control. As a result of farinograph study, water absorption of dough increased and decreased with increasing amounts of brown glutinous rice flour with and without aroma, respectively. Stability, developing time and elasticity of dough showed a decreasing tendency. When compared with the control, aromatic brown glutinous rice samples produced noodles with a greater degree of lightness and a less intensity of yellowing. Replacement of up to 20% of Korean wheat flour by aromatic brown glutinous rice flour and brown glutinous rice flour in noodle had similar cooked properties such as weight gain, volume and water absorption as compared with the control. From the result of sensory evaluation, composite flours(addition up to 30% aromatic brown glutinous rice flour and up to 20% brown glutinous rice flour) and control were rated with a relatively high quality score for appearance, taste and overall eating quality.

• Culinary science and hospitality research
• /
• v.8 no.3
• /
• pp.267-278
• /
• 2002

To promote the consumption of race, comparative study was performed on characteristics of wheat flour noodle mixed with brown rice flour and colored rice flour. Protein content of colored rice was higher than that of the brown rice, but lipid and ash contents were similar to those of brown rice. Colored rice flour had significantly lower peak viscosity, holding viscosity, breakdown viscosity, final viscosity and setback viscosity than those of wheat flour, while brown rice had significantly higher peak viscosity, breakdown viscosity and setback viscosity than those of colored rice flour and wheat flour. Colored rice and brown rice had 5.3~6.4% total dietary fiber, and the proportions of soluble fiber in total dietary fiber were quite low, ranging from 9.4% to 18.8%. L(brightness), a(redness) and b(yellowness) of raw noodles were measured using a colorimeter. L(brightness) and b(yellowness) values of Asian raw noodles made from colored rice and brown rice significantly decreased. Addition of colored rice flour and brown rice flour to Asian noodle reduces cutting forces of dry and cooked noodles. The cooked noodle with 10% chalheukmi waxy rice flour was the highest in the cutting force of cooked noodle. Addition of 20% chalheukini waxy rice flour and 20% brown rice flour to wheat flour was got to a relatively high score for appearance, color, texture, taste and overall eating quality from sensory evaluation of cooked noodles.

• Journal of the Korean Society of Food Culture
• /
• v.33 no.6
• /
• pp.588-596
• /
• 2018

In this study, dry-milled rice flour from different varieties (Samgwang, Boranchan, Hanareum, Dasan, Hangaru) and different particle sizes were used to manufacture Jeung-pyun and the quality characteristics were analyzed. The Jeung-pyun produced from Samgwang, Dasan and Hangaru milled rice flour showed highly dense pores. The Jeung-pyun produced from Hanareum only showed a significant difference according to the particle size. Samgwang, Boranchan and Dasan varieties with a particle size of 150 m showed a significant decrease in volume (p<0.05). Samgwang showed the lowest pH at all particle sizes (p<0.05). The sweetness of Samgwang varieties was the highest at $3.27-3.63^{\circ}Brix$ (p<0.05). The hardness of Jeung-pyun increased with increasing particle size (p<0.05). The highest acceptance of Jeung-pyun in terms of volume and bitter taste was observed with Hanareum at a particle size of 50 m. When the particle size was 50 m, the overall acceptance was highest for Jeung-pyun made from Samgwang followed by Hanareum. The acceptance of all the sensory characteristics was high when the particle size of rice flour was 50 m. When the appearance of Jeung-pyun was measured, Samgwang showed a dense structure and low hardness. Hanareum showed an increasing volume and springiness. Overall Samgwang and Hanareum were found to be the most suitable varieties for the production of Jeung-pyun.

• Korean journal of food and cookery science
• /
• v.27 no.6
• /
• pp.745-754
• /
• 2011

To improve the textural properties of gluten free rice flour based products, the physicochemical and pasting properties of extruded non-waxy rice flours using extruder were investigated. The high yielding Tongil type rice variety, Hanarum was used. Hanarum rice flour was prepared by dry milling from soaked and dried rice grain. The operation conditions of twin screw extruder were 250 rpm of screw speed, $160^{\circ}C$ of barrel temperature, and 24, 27, and 30% of moisture content. Hanarum extruded rice flour (HERF) were lower in crude lipid and ash contents, but higher in crude protein than Hanarum rice flour (HRF). The color values of HERF showed significantly different (p<0.05) with different moisture contents. Water binding capacities, apparent amylose contents, and damaged starch of HERF were higher than those of HRF. Moisture contents affected water binding capacities of HERF. Solubility increased with increasing heating temperature and solubilities of HERF differed significantly (p<0.05). X-ray crystallinity was changed after extrusion cooking and that of HERF showed sharp peaks at $2{\theta}=18-20^{\circ}$. The pasting viscosities of HERF kept lower values (~ 10 RVU) constantly.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.286-286
• /
• 2017

We conducted to compare the characteristics of rice flours according to the different milling processes. Five rice varieties (Oryza sativa L.) with different amylose content were prepared by wet and dry milling processes. The moisture contents of wet-milled rice flours (WMR) was mostly three-time higher than those of dry-milled flours (DMR). Water absorption index (WAI), water solubility index (WSI) and swelling power (SP) increased in proportion to temperature ($50-90^{\circ}C$). WAI, WSI, SP of DMR showed higher value than those of WMR. Baeokchal (BOC) which is waxy rice cultivar was significantly high level of WSI. Pasting properties of DMR except BOC cultivar resulted in higher peak viscosity, trough viscosity, final viscosity and Setback. The levels of resistant starch in the four cultivars except Dodamssal (DDS) were under 1% irrespective of Milling processes, whereas the resistant starch contents of DMR and WMR in DDS was 9.18 and 6.27, respectively. Damaged starch content of WMR were less than those of DMR, moreover, negative correlation was observed between amylose content and damaged starch of rice cultivars. These results suggest that the properties of rice flour varied depending on the milling methods and varieties, and it could be a reference for selecting the appropriate processing purposes.