• 한국축산식품학회지
• /
• 제39권4호
• /
• pp.655-667
• /
• 2019

The present study aimed at investigating the effects of dry- and wet-aging methods on flavor compounds and sensory properties of low fat Hanwoo beef muscles. All the beef samples were obtained from 2-grade carcasses of Hanwoo cows. The beef samples used in the dry- and wet-aging methods were prepared in the forms of quarter beef (bone-in) and cuts (boneless), respectively. The dry-aging was carried out at $2^{\circ}C-4^{\circ}C$ and humidity of 65%-85%, while the wet-aging was done at $1^{\circ}C$ for 0, 20, 40, and 60 d. At each aging time, three muscles: longissmus thoracis (LT), glutaeusmedus (GM) and semimembranosus (SM) were taken from the corresponding quarters and cuts, and used for the flavor compounds and sensory analyses. Results showed that both aging methods significantly increased the concentrations of flavor compounds and total amount of all classes of the flavor compounds as the aging time increased (p<0.05). In the dry-aging method, the GM and SM muscles presented significantly higher total amounts of pyrazines and sulfur-containing compounds compared to the LT muscle (p<0.05). Both the aging methods improved the eating quality attributes, indicating by increased scores of sensorial attributes with increased aging time for all the muscles studied (p<0.05). However, compared to the wet-aging, the dry-aging method resulted in significantly higher scores of tenderness and flavor for the GM and SM muscles after 40 to 60 d. Thus, postmortem aging, especially the dry-aging method could be used to improve eating quality attributes (tenderness and flavor) of low fat beef muscles such as GM and SM.

• Journal of the Korean Wood Science and Technology
• /
• 제46권1호
• /
• pp.10-16
• /
• 2018

비목나무는 줄기가 곧고 직경이 40 cm까지 자라지만 아직 미사용되고 있다. 잘 알려지지 않은 수종을 이용하려면 먼저 그 수종의 열기건조스케쥴을 찾아야 한다. 비목나무의 열기건조스케쥴을 테라자와의 오븐급속건조법으로 추정하였으며, 열기건조 실험을 통해 검증하였다. 비목나무의 평균 생재함수율과 평균 생재비중은 각각 72.3%과 0.53이다. 테라자와의 오븐급속건조법을 사용하여 얻은 25 mm 두께 비목나무의 가장 안전한 건조조건은 초기건조온도 $50^{\circ}C$, 초기건습구온도차 $4^{\circ}C$, 말기건조온도 $75^{\circ}C$이다. 이러한 조건에 맞는 미임산물연구소 스케쥴은 T5-D4이다. 추정 열기건조스케쥴 T5-D4와 새로운 개량 열기건조스케쥴 T8-C5로 25 mm 판재를 건조한 결과, 모두 불가피하게 발생한 수심재터짐 이외에는 내부할렬과 틀어짐이 전혀 발생하지 않았다.

• 분석과학
• /
• 제32권3호
• /
• pp.113-119
• /
• 2019

Enhancement of footwear impressions in urine on the surface of tiles by using p-dimethylaminocinnamaldehyde (DMAC), which react with urea, and ninhydrin, 1,8-diazafluoren-9-one (DFO), 1,2-indanedione/zinc (1,2-IND/Zn), which react with amino acid, was studied. As a result of comparing the application methods of reagents, the ninhydrin and the 1,2-IND/Zn were suitable for application with spray method, which is spray directly on footwear impression, DFO and DMAC were suitable for application with dry contact method, which is applying heat with press to DMAC impregnated paper on footwear impression. In addition, DMAC applied with dry contact method showed best contrast and enhancement result in both white and black colored tiles by comparing of the sensitivity by different dilution ratio of urine and the aging time of footwear impressions in urine. And the result of applied with DMAC (with dry contact method) on the floor tiles collected at various places in a building's men's and women's bathrooms, it can be successfully enhanced that footwear impressions in urine. So it is believed that the method can be used to recover footwear impressions in urine from real crime scenes.

• 한국안전학회지
• /
• 제34권3호
• /
• pp.28-35
• /
• 2019

Dry water is a core-shell structured powder which comprises a very fine water core covered with hydrophobic silica particles. Recently, the dry water has attracted attention as a new type of fire extinguishing agents. However, characteristics of the dry water as a fire extinguishing agent have not been revealed until now. To our best knowledge, this is the first work to uncover effects of particle size of the dry water on the fire extinguishing performance. Pristine dry water, which has heterogeneous particle size distribution, was carefully separated by sieving method into three fractions which were a small size (ca. $110{\mu}m$) fraction, a medium size (ca. $220{\mu}m$) fraction and a large size (ca. $400{\mu}m$) fraction. Microscopic observations confirmed the effective separation of dry water's particle size. In extinguishing tests of wood cribs fire, the medium size dry water showed most excellent fire extinguishing performance, as compared to other dry waters having small (ca. $110{\mu}m$) and large (ca. $400{\mu}m$) particle size. The good performance of the medium size (ca. $220{\mu}m$) dry water may be attributed to the balance between cooling effect of the water core and smothering effect of the silica particles. It is also revealed that small size dry water has poor flowability than large size dry water.

• 한국진공학회지
• /
• 제6권3호
• /
• pp.242-248
• /
• 1997

기존의 다공질 실리콘 제작 방법인 chemical etching 방법을 병행하면서 새로운 제 작 방법으로서 dry etching 기술을 적용하여 다공질 실리콘을 제작하였다. 또한, 비교를 위 해 E-beam lithography 기술로 실리콘 구조물을 제작하였는데 이 경우 기술상 문제로 약 0.3$\mu\textrm{m}$의 직경을 가진 구조물이 최소의 크기였다. 따라서 새로운 방법으로 4인치 wafer위에 mask 역할을 해주는 다이아몬드 분말을 spin coater로 입힌 후 Reactive Ion Etching(RIE) 방법으로 미세구조의 다공질 실리콘을 제작하였다. 다양한 조건으로 제작된 sample들의 morphology를 SEM과 AFM 등을 이용하여 분석하였고 이 morphology에 대응하는 PL스펙 트럼을 측정하였다. 그 결과, 다이아몬드 분말을 이용한 dry etching방법으로 제작된 다공질 실리콘의 PL peak의 위치가 chemical etching 방법의 다공질 실리콘의 PL peak 위치인 760nm에 비해 높은 에너지인 590nm로 나타났다.

• 대한가정학회지
• /
• 제17권4호
• /
• pp.15-22
• /
• 1979

This paper was studied changes of physical properties of Lining fabrics by washing and difference between dry method. I experimented four kinds of Lining fabrics for the sample . The analysis was performed by correlation coefficient analysis and significance tested between correlation coefficients. The results are summarized as follows : 1) Increasing rate of shrinkage tends to call high density and weight. 2) Rayon fabrics is shown the most high rate of shrinkage and decreasing strength by increasing washing times. 3) Drip dry makes little change of physical properties. 4) Polyester fabrics is little by washing times and dry method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.69-70
• /
• 2006

Waste vinyl tretreatment system has been developed by the joint project between KIMM and Woosung Co. General process for removal of impurities from waste vinyl is consisted of feeding, separating, cutting, washing, drying and recovering impurities. However, there are problems such as wastewater when washing of waste vinyl. In order to solve these problems we have developed new dry type cleaning system.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.233-234
• /
• 2023

This paper confirms the application sites of dry coupler technology, which is a direct connection method using screw threads, and Unlike wet couplers, this method can stand on its own without proof support and continuous work on the upper part. Furthermore, concludes with personal considerations to improve constructability.

• 한국전기전자재료학회논문지
• /
• 제14권2호
• /
• pp.158-162
• /
• 2001

In this report, a new process for patterning of YBaCuO thin films, ICP(inductively coupled plasma) method, is described by comparing with existing wet etching method. Two 100㎛ wide and 2mm long YBaCuO striplines on LaAlO$_3$ substrates have been fabricated using two patterning techniques. And the properties were compared with the critical temperature and the SEM photography. Then, the critical temperatures of two samples were about 88 K, but the cross section of sample using ICP method was shaper than that using the wet etching method. ICP method can be used as a good etching technique process for patterning of YBaCuO superconductor.

• 한국농공학회지
• /
• 제37권E호
• /
• pp.72-78
• /
• 1995

To support some knowledge in planning irrigation system, short or long-term irrigation scheduling or determining irrigation reservoir capacity, it is necessary to estimate peak irrigation requirements and seasonal distribution of water demands for various return periods. In this paper Dry Day Index and Probable Evapotranspiration were evaluated to decide seasonal consumptive use of paddy rice for a design year using several decades' daily rainfall data and 5 years'('82~'86) actual evapotranspiration data, respectively. To obtain Dry Day Index that is defined as the number of probable dry days for a given period, Slade unsymmetrical distribution function was adopted. Dry Day Index was analysed for 5 and 10-day intervals. Each of them was evaluated with return periods of 1, 3, 5, 10 and 20 year. Their singnificance was tested by X$^2$ method. Based on these values, the Probable Evaportanspiration, that is the average daily ET both in dry days and rainy days during a given period, was estimated. Crop coefficient was also determined by the modified Penman equation proposed by Doorenbos & Pruitt.