• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.811-815
• /
• 1997

The present work describes the effect of dry grinding of a mixture composed of $Y_2O_3$, $BaCO_3$ and CuO powders with a planetary ball mill before heat treatment on crystal structure and superconductivity in the $YBa_2Cu_3O_{7-y}$. The specific surface area of the ground product of mixture decreased with an increase in the grinding time, after showing an upward trend up to 60 minutes of grinding. The critical current density, which was influenced by the grinding time of mixture, indicates the maximum value of about $150A/cm^2$ in the case of 60 minutes grinding, while the critical temperature, which were around 90K, for the sintered bodies were almost independent of the grinding time.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1998.12a
• /
• pp.250-258
• /
• 1998

• The Korean Journal of Ceramics
• /
• v.1 no.2
• /
• pp.106-110
• /
• 1995

A structural analysis of dickite prepared by dry grinding with different grinding time has been made by X-ray diffraction. The $SiO_4$ tetrahedra are found to remain unchanged in the ground dickite samples by analysing the radial distribution function(RDF). On the other hand, with an increase of the grinding time a change in oxygen coordination number around aluminum has been quantitatively confirmed. This variation may be attributed to the change of hydroxyl induced by the prolonged grinding.

• Journal of the Korean Ceramic Society
• /
• v.34 no.2
• /
• pp.195-201
• /
• 1997

The present paper describes the effect of dry mixed grinding on kaolinite-aluminum trihydroxide mixture with a planetary ball mill before sintering and its influence on mullite formation during sintering. The size reduction of the mixture is market in the early stage of grinding and the obtained fine particles agglomerate subsequently with an increase of grinding time. The crystal structure of the mixture is collapsed easily into an amorphous one by planetary ball milling, of which amount increases with an increase of grinding time. Only mullite phase except for anatase as an inherent impurity in kaolinite appeared in the sintered body of the mixtures with mixed grinding as relatively lower temperature 1523K, while corundum, cristobalite, and Al-Si spinel phases, besides mullite were formed in the sintered body of the mixture without mixed grinding. Therefore, the mixed grinding treatment is very effective to improve the homogeneous mixing and disp-ersion of the mixture of raw materials on a micro scale and to decrease the thermal decomposition tem-perature by crystal structure change of them so as to obatin direct preparation of mullite with high purity at relatively low temperature.

• Journal of Power System Engineering
• /
• v.17 no.1
• /
• pp.91-96
• /
• 2013

The present paper focuses on the fabrication of materials with higher thermal conductivity. Nanofluid is a novel transfer prepared by dispersing nanometer-sized solid particles in traditional heat transfer fluid to increase thermal conductivity and heat transfer performance. The purpose of this study is making the nano-size particle. The experiment of MWCNT and $Al_2O_3$ was carried out using a planetary ball mill at several rotation speeds: 200 ~ 400 rpm. The results were examined using scanning electron microscope(SEM). In the case of the MWCNT, it could be more grinding into the small particle in the dry condition and it confirm in the case of the $Al_2O_3$ to be more grinding into the small particle contrary to the MWCNT in the wet condition. In the mixture grinding result of MWCNT and $Al_2O_3$, the dry condition showed the good result in low rotation speed than the wet condition.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.491-492
• /
• 2006

The horizontal high energy rotor ball mill ($Simoloyer^{(R)}$) is used to break and activate dry solids. It is used for dry-milling and in the vertical mount for wet-milling in leaching processes. Technical electric arc furnace (EAF) dust with high contents of zinc oxide, zinc ferrite and magnetite is efficiently separated by ambient temperature leaching. The process shows promise for industrial application

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.6
• /
• pp.701-708
• /
• 2011

Although Titanium material has superior properties, it belongs to difficult-to-machine materials. The present research applies magnetic abrasive finishing to precision machining of internal-face of titanium pipes, and analyzed & assessed the influence of grinding conditions on magnetic abrasive effects through the removed amount and surface roughness of materials. There was the influence on grinding properties according to change of rotational speed, a total input of mixed powder and an input of grinding liquid, and when the total input, rotational speed and ratio of electrolytic iron versus magnetic abrasives are 8g and 1000rpm, it was most advantageous in aspects of surface roughness and material removal amount, and the grinding liquid remarkably improved the surface roughness and material removal amount only with addition of trace amounts of light oil rather than dry machining conditions. And a result of considering the influence on grinding properties by using an inert gas (Argon gas) for improving grinding properties of the internal-face of titanium pipe, the present research has obtained improvement effects in the removal amount and surface roughness through utilization of an inert gas.

• Korean journal of food and cookery science
• /
• v.26 no.6
• /
• pp.727-736
• /
• 2010

The purpose of this research was to compare the physicochemical compositions and morphological properties of five varieties of rice flours (RR, RGD, RSGD, RWDG, RWGD). RR was raw milled rice without washing, RGD was raw rice flour without soaking, RSGD was raw milled rice flour with 0 hr of soaking, RWDG was raw rice flour with 8 hr of soaking and grinding after drying, and RWGD was raw rice flour with 8hr of soaking and drying after grinding. The protein and lipid contents of wet milling rice flour (RSGD, RWDG, RWGD) were significantly lower than those of dry milling rice flour (RR, RGD). L and a values were significantly increased in wet milling rice flour, and b value was significantly increased in dry milling rice flour. Scanning electron microscopy (SEM) showed that RWDG and RWGD were distributed as separated fine particles in rice flours. The WBC of RWDG and RWGD were higher than those of other rice flours. Solubility was significantly increased according to the temperature, and swelling power of RWDG was higher than that of other rice flours at 50 and $60^{\circ}C$. Using RVA, the initial pasting temperature and setback of RWDG were lower and the peak viscosities of RSGD and RWDG were higher than those of other rice flours. Using a mixograph, peak times were not significantly different among the groups, wheras peak heights were significantly decreased in RSGD, RWDG, and RWGD. The peak width of RWGD was lower than those of other rice flours. Based on these findings, RWDG flour was less damaged, and had a lower setback and pasting temperature, which makes it an appropriate rice flour for commercial mass production.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.252-256
• /
• 2001

The rapid development of communication equipment and information processing technology has led to a constant improvement in cordless communication. Lithium ion batteries used in cellular phones and laptop computers, in particular, have been in the forefront of the above revolution. These batteries use high value added raw materials and have a high and stable energy output and are increasingly coming into common use. The development of the material for the negative terminal has led to an improvement in the quality and efficiency of the batteries, whereas a reduction in the cost of the battery by researching new materials for the positive anode has become a research theme by itself. These long life batteries, it is being increasingly realized, can have value added to them by recycling. Research is increasingly being done on recycling the aluminum case and the load casing for the negative diode. This paper aims to introduce the current situation of recycling of lithium ion batteries. 1. Introduction 2. Various types of batteries and the situation of their recycling and the facts regarding recycling. 3. Example of cobalt recycling from waste Lithium ion secondary cell. 3-1) Flow Chart of Lithium ion battery recycling 3-2) Materials that make a lithium ion secondary cell. 3-3) Coarse grinding of Lithium ion secondary cell, and stabilization of current discharge 3-4) Burning 3-5) Grinding 3-6) Magnetic Separation 3-7) Dry sieving 3-8) Dry Classifying 3-9) Content Ratio of recycled cobalt parts 3-10) Summary of the Line used for the recovery of Cobalt from waste Lithium ion battery. 4. Conclusion.

• Korean Journal of Materials Research
• /
• v.19 no.4
• /
• pp.212-219
• /
• 2009

A study on the dry beneficiation of sericite occurring in the Daehyun Mine of the Republic of Korea region as performed by applying selective grinding and air classification techniques. Quartz and sericite occurred in the raw ore as major components. The results of liberation using a ball mill and an impact mill showed that the contents of $R_2O$ were increased while $SiO_2$ was decreased in proportion to decreasing particle size. According to the XRD, XRF analysis and the EDS of SEM analysis, the ball mill gave a better grade product in $R_2O$ content than the impact mill when the particle size was the same. When the raw ore was ground by the impact mill with arotor speed 57.6 m/sec and then followed by 15,000rpm classification using an air classifier, the chemical composition of the over flowed product was 49.65wt% $SiO_2$, 32.15wt% $Al_2O_3$, 0.13wt% $Fe_2O_3$, 10.37wt% $K_2O$, and 0.14wt% $Na_2O$. This result indicates that the $R_2O$ contents were increased by 49.5% compared to that of the raw ore. From these results described above, it is suggested that hard mineral such as Quartz little ground by selective grinding using impact mill whereas soft mineral such as sericite easily ground to small size. As a result of that hard minerals can be easily removed from the finely ground sericite by air classification and the $R_2O$ grade of thus obtained concentrate was improved to higher than 10wt% which can be used for ceramics raw materials.