• 한국염색가공학회지
• /
• 제14권4호
• /
• pp.223-228
• /
• 2002

Cotton fabric was treated with $TiO_2$-PEG600 dispersion colloid by pad-dry-cure and wet-fixation process to improve the performance properties as well as UV-cut effect. As the concentration of $TiO_2$/PEG increased tensile strength, crease resistance, stiffness of treated cotton fabric increased. Application of wet-fixation method provided a further improvement in tensile strength, crease resistance, stiffness of treated cotton fabric. Cotton fabric treated with $TiO_2$/PEG was more efficient in UV-cut property than untreated cotton.

• 한국생산제조학회지
• /
• 제9권6호
• /
• pp.158-163
• /
• 2000

High speed machining of difficult-to-cut materials generates the concentrated thermal/frictional damage at the cutting edge of the tool and rapidly decreases the tool life. In this paper, the cutting environments, such as dry, fluid coolant, and compressed chilly air coolant, were investigated to improve the tool life. For this study, the compressed chilly air system was manufactured. The experiments were performed for various difficult-to-cut materials and various coated tools. The effectiveness of the developed methods on the basis of tool life was estimated. The results show that the cutting environment using compressed chilly air coolant provided better tool life than using the fluid coolant or using the dry.

• 산업기술연구
• /
• 제26권B호
• /
• pp.73-81
• /
• 2006

A sensitivity analysis about effects of influencing factors on the stability of Soil cut slope was performed. Slope stability analyses were carried out under dry, rainy and seismic conditions. Dominant factors controlling the slope stability were chosen such as cohesion and internal friction angle, unit weight of soil, water table and seismic horizontal coefficient used for the slope stability during earthquake. Parametric stability analysis with those factors was performed for sensitivity analysis. As results of analyzing the sensitivity of factors under dry and rainy conditions, effects of cohesion, internal friction angle and unit weight of soil on the stability of slope are more critical in the dry condition than in the rainy condition. Cohesion and internal friction angle are more dominant factors influencing the slope stability irrespective of dry or rainy conditions than unit weight of soil and the horizontal seismic coefficient. The unit weight and the horizontal seismic coefficient affects crucially the stability according to conditions of slope formation and dry or rainy seasons. For the effect of horizontal seismic coefficient on stability of slope, safety factor of slope is not affected significantly by dry or rainy conditions. However, increase of the horizontal seismic coefficient under the rainy condition floes reduce the safety factor significantly rather than the dry condition. Therefore, it is needed that the location of the water table is assigned appropriately to satisfy the required safety factor of stability in the case of checking slope stability for the rainy and seismic conditions.

• 한국초지조사료학회지
• /
• 제14권4호
• /
• pp.257-263
• /
• 1994

The experiment was canied out to investigate the effects of cutting frequencies (3, 4 and 5 cuts per year) in relation to fertilization of mineral nitrogen on crude protein yield and the contents of crude protein and acid detergent fibre in orchardgms(Dacty1is glomerata L.). Tne results are as follows : 1. The content of crude protein increased according to the increase in cutting frequency and showed the highest in the 1st cut in all treatments. At 4 and 5 cutting frequencies per year, the content of crude protein increased in a large extent according to the increased fertilization of mineral nitrogen. However at 3 cutting frequency, the content of cmde protein appeared higher for no application of mineral nitrogen than for the treatments with fertilization. 2. 'Ihe content of acid detergent fibre(ADF) was considerably reduced at 4 and 5 cutting frequencies and in all treatments, the lowest were recorded in the 1st cut or in the last cut. At 3, 4 and 5 cutting frequencies, the highest ADF were shown in the 2nd cut, 3rd cut and 3rd cut respectively. However, the general trend was that the content of ADF was greatly reduced according to increased level of mineral nitrogen fertilization. 3. The yeild of cmde protein was the highest at 5 cutting frequency(l.2 ton DMIha) and it indicated that the yield of cmde protein increased in accordance to the increase in fertilization of mineral nitrogen and cutting frequency. 4. In all treatments, positive correlation(p<0.001) between the yeilds of crude protein and annual dry matter yield appeared. Negative correIation(p

• 한국초지조사료학회지
• /
• 제17권4호
• /
• pp.387-398
• /
• 1997

This experiment was to investigate the surface coverage, sward height and dry matter yield of 63 perennial ryegrass cultivars with control cultivar, orchardgrass(Potomac) at different cutting dates(May 25, July 5, August 20 and October 5), in order to select the adaptable cultivars of perennial ryegrass in the middle region of Korea. Four perennial ryegrass cultivars, E.V. Meadea, Aberystwyth S101, Raidor and Real, didn't survive afler sowing. Surface coverage of perennial ryegrass cultivars cut in August 20 was lower than others. Sward height of perennial ryegrass cultivars at each cutting dates was lower than that of orchardgrass. There were no significant differences in sward heights of each cutting date. Dry matter yield of perennial ryegrass cultivars cut in August 20 was lower than others. Total dry matter yield of Oakpark 6% Viktoria, Petra, G. Manawa, and Kangaroo Valley was fell in the range of 11.76 and 10.37t/ha while that of orchardgrass was 12.09t/ha. On the basis of total annual dry matter yield, the adaptability of perennial ryegrass cultivars was classfied as following.

• 한국초지조사료학회지
• /
• 제15권1호
• /
• pp.43-51
• /
• 1995

Tlis experiment was to study the effects of application rates of mineral N and cattle slurry on the dry matter yield and botanical compositions of Orchardgrass sward grown in 4 cuttings in a year. Annual rates of mineral N of O($N_0$), 120kg(($N_1$), 240kg(($N_2$) and 360kg/ha(($N_3$) were applied as urea, and cattle slurry applied at rates of O(($N_0=N_0$), $40m^3$($S_1$), $80m^3$(($S_2$) and $120m^3$($S_3$), suppling 120kg, 240kg and 360kgl ha, respectively. The results were summarized as follows; 1. The limiting annual application rates of mineral N and cattle slurry was estimated about 120kg/ ha. 2. The growth of Orchardgrass after the 3rd cut was decreased by summer depression. Consequently, the botanical compositions of Orchardgrass showed only 7.7% and 4.0% in 3rd and 4th cut, respectively. However, the 15 and 17 species of weeds originated in 3rd and 4th cut. 3. The botanical compositions of Amaranthus mangostanus in 3rd cut and Portulacea aleracea in 4th cut were greatly increased with application rates of cattle sluny. 4. Relative efficiency of cattle sluny for the dry matter production of Orchardgrass as compared to mineral N were 93.396, 99.5% and 113.6% in 120kg, 240kg and 360kglha at rates of cattle slurry, respectively.

• 한국생물환경조절학회:학술대회논문집
• /
• 한국생물환경조절학회 2001년도 봄 학술발표논문집
• /
• pp.39-40
• /
• 2001

This experiment was conducted to investigate the effect of root zone heating on the growth of cut minirose Rosa hybrida L. ′Little Marble′ in winter season. Effects of four different root zone temperatures of 16, 20, 24$^{\circ}C$ and non-heating control on the growth and productivity were compared. Harvested cut-flowers were measured for stem length, stem diameter, fresh and dry weights, numbers of leaves, stems and flowers, days to flower, and chlorophyll concentration. The results showed that mean height was the greatest at 16$^{\circ}C$. Days to flower was the shortest at 24$^{\circ}C$. Fresh and dry weights of top (shoot＋leaf＋flower), shoot and leaf were the greatest at 2$0^{\circ}C$. Stem and flower numbers were the greatest at 16$^{\circ}C$, but leaf number was the greatest at 2$0^{\circ}C$. Mean cut flower yield was the greatest at 16$^{\circ}C$. Chlorophyll concentration was slightly higher at 16$^{\circ}C$, but was not significantly different among the treatments. Stem diameter was the greatest at 2$0^{\circ}C$. Dry matter was the greatest at 24$^{\circ}C$. Total yield of cut rose stems increased with increasing temperature. Combined heating could save 24% in fuel cost as compared to the air heating alone. The results obtained suggested that optimal root zone temperature for the growth of cut rose "Little Marble" was 2$0^{\circ}C$, and the greenhouse heating energy can be saved by minimal air heating combined with root zone heating to 2$0^{\circ}C$.

• ETRI Journal
• /
• 제27권3호
• /
• pp.304-311
• /
• 2005

We report on the fabrication of an AlGaAs/InGaAs/GaAs pseudomorphic high electron mobility transistor (PHEMT) using a dielectric-defined process. This process was utilized to fabricate $0.12\;{\mu}m\;{\times}\;100 {\mu}m$ T-gate PHEMTs. A two-step etch process was performed to define the gate footprint in the $SiN_x$. The $SiN_x$ was etched either by dry etching alone or using a combination of wet and dry etching. The gate recessing was done in three steps: a wet etching for removal of the damaged surface layer, a dry etching for the narrow recess, and wet etching. A structure for the top of the T-gate consisting of a wide head part and a narrow lower layer part has been employed, taking advantage of the large cross-sectional area of the gate and its mechanically stable structure. From s-parameter data of up to 50 GHz, an extrapolated cut-off frequency of as high as 104 GHz was obtained. When comparing sample C (combination of wet and dry etching for the $SiN_x$) with sample A (dry etching for the $SiN_x$), we observed an 62.5% increase of the cut-off frequency. This is believed to be due to considerable decreases of the gate-source and gate-drain capacitances. This improvement in RF performance can be understood in terms of the decrease in parasitic capacitances, which is due to the use of the dielectric and the gate recess etching method.

• 한국초지조사료학회지
• /
• 제14권2호
• /
• pp.69-75
• /
• 1994

This experiment was canied out to study the effect of cutting frequencies (3, 4 and 5 cuts per year) and mineral nitrogen fertilization on dry matter yields, in order to estimate optimum level of fertilizing mineral nitrogen in orchardgrass(Dacry1is glomerafa L.). The results are as follows: 1. Dry matter yields were the highest in the 1st cut at 3 cutting frequency and in the 2nd cut at 4 and 5 cutting frequencies, and they shared 49.7, 37.0 and 37.0% of annual dry matter yield respectively. 2. When only phosphorus and potassium were applied, annual dry matter yields were between 9.4 and 11.5 tons per ha and the highest yield was observed at 3 cutting frequency. 3. Dry matter yield in relation to fertilization of mineral nitrogen was highly increased when more nitrogen was applied as 360 kg per ha compared to 240 kg per ha at 3 cutting frequency. At 4 and 5 cutting frequencies, increases in dry matter yield, to large extent, were showed at 120 and 150 kg of nitrogen per ha(30 kg Nlcutlha) compared to no application of nitrogen. The efficiencies of mineral nitrogen fertilization (kg DM/kg N) were 28.0, 22.7 and 20.6 kg dry matter yields per nitrogen(kg) respectively). 4. At 4 and 5 cutting frequencies, dry matter yields were reduced when 360 kg and 300 kg of mineral nitrogen per ha(90 kg and 60 kg Nlcutlha) were applied respectively. 5. Particularly at 4 and 5 cutting frequencies of this study, maximum marginal yields reached at 129.9 kg and 148.0 kg of fertilizing mineral nitrogen per ha, and economical borden of mineral nitrogen fertilization were between 222.4 and 250.0 kg and between 244.8 and 276.8 kg respectively. At the same cutting frequencies, the highest dry matter yields were obtained at 365.4 and 433.8 kg of fertilizing mineral nitrogen respectively.

• 대한안전경영과학회지
• /
• 제6권1호
• /
• pp.283-300
• /
• 2004

This paper describes the NC simulator system for Wire-cut electrodischarge machining. Electrodischarge Wire-cut machining is applicable to all materials including metals, alloys, and most carbides. Although CAM system generate the NC code considering electrodischarge conditions, incorrect Wire-cut tool path bring about fatal results. The simplest way of simulating a EDM process is to display the trajectory of Wire-cutter location by line segments. With this kind of simulation, the programmer can get a general idea about whether the wire is moving as planned but cannot locate gouging or excess material because only the wire location will be seen, not the changes in the workpiece as it is machined. The ideal way of simulating the EDM process is to display the solid model of the workpiece as it is machined. Therefore we propose the ideal NC simulator system for Wire-cut EDM.