• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.11
• /
• pp.1599-1603
• /
• 2008

Sodium is involved in elevation of oxalate content in some plant species and this element is abundant in saline soils. Oxalate causes precipitation of insoluble calcium oxalate in the rumen and kidneys. The intention of this study was to evaluate the effect of soil salinity stress on dry matter yield and oxalate content in pot-grown napiergrass (Pennisetum purpureum Schumach). Plants were cut three times at 56, 118 and 179 d after transplanting to the pots. Five salinity treatments were used containing various concentrations of NaCl solution as follows: 0, 100, 300, 600 and 900 mM. At 28, 42, 84, 98, 146 and 160 d after transplanting, plants were irrigated with one liter of the particular treatment for each application. Dry matter yield of napiergrass was not affected (p>0.05) by salinity treatments. Plants treated with 100 mM NaCl exhibited a higher soluble oxalate content compared to other treatments, but the differences were not statistically significant (p>0.05). Although salinity treatments had significant (p<0.05) effects on insoluble and total oxalate contents in plant tissue between the 100 and 900 mM NaCl treatments, the differences were too small to be considered biologically important. The present study indicates that where the soil is high in NaCl, napiergrass will tend to grow well and be low in oxalate.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.12
• /
• pp.1718-1723
• /
• 2017

Objective: The study explored the dynamics of shearing force and its correlation with chemical compositions and in vitro dry matter digestibility (IVDMD) of stylo. Methods: The shearing force, diameter, linear density, chemical composition, and IVDMD of different height stylo stem were investigated. Linear regression analysis was done to determine the relationships between the shearing force and cut height, diameter, chemical composition, or IVDMD. Results: The results showed that shearing force of stylo stem increased with plant height increasing and the crude protein (CP) content and IVDMD decreased but fiber content increased over time, resulting in decreased forage value. In addition, tall stem had greater shearing force than short stem. Moreover, shearing force is positively correlated with stem diameter, linear density and fiber fraction, but negatively correlated with CP content and IVDMD. Conclusion: Overall, shearing force is an indicator more direct, easier and faster to measure than chemical composition and digestibility for evaluation of forage nutritive value related to animal performance. Therefore, it can be used to evaluate the nutritive value of stylo.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.10 no.1
• /
• pp.36-41
• /
• 1990

The more N fertilizer, the more grass proportion (58 8, 240 kg N/ha) and the less white clover (Trifolium repens) (6 %, 240 kg N) under grazing utilization. The proportion of white clover was maintained about 27 % at 60 kg N/ha/yr and weed proportion was reached 33 %. Under the condition of differentiated N rates, the proportion of white clover was ranged from 10 to 36 % at 20 kg N/ha/cut which was allocated after every grazing and it probably dependent on differentiated N rates rather than total amounts of N applied annually. 53-74 % of total dry matter yield were concentrated at 1st and 2nd growth under grazing system and there were no great differences in dry matter yield at 3rd, 4th, and 5th growth in comparison with the variations of N rates. There was very significant relationship between the proportions of white clover and the amounts of N uptaken by herbage upto 180 kg N/ha. About 138 kg N/ha were uptaken by herbage without N fertilizer but only with white clover (31 %) as a substitute of N. In the amounts of crude fiber and crude protein by differentiation of N fertilizer, there were no any great variations and liveweightgain during grazing periods was reached 1583 kg liveweightlha.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.45 no.4
• /
• pp.61-69
• /
• 2022

The function of coolant in machining is to reduce the frictional force in the contact area in between the tool and the material, and to increase the precision by cooling the work-piece and the tool, to make the machining surface uniform, and to extend the tool life. However, cutting oil is harmful to the human body because it uses chlorine-based extreme pressure additives to cause environmental pollutants. In this study, the effect of cutting temperature and surface roughness of titanium alloy for medical purpose (Ti-6Al-7Nb) in eco-friendly ADL slot shape machining was investigated using the response surface analysis method. As the design of the experiment, three levels of cutting speed, feed rate, and depth of cut were designed and the experiment was conducted using the central composite planning method. The regression expressions of cutting temperature and surface roughness were respectively obtained as quadratic functions to obtain the minimum value and optimal cutting conditions. The values from this formula and the experimental values were compared. As a result, this study makes and establishes the basis to prevent environmental pollution caused by the use of coolant and to replace it with ADL (Aerosol Dry Lubricant) machining that uses a very small amount of vegetable oil with high pressure.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.11 no.2
• /
• pp.121-128
• /
• 1991

Forage productivity of two sorghum hybrids, Pioneer(P) 931 and P 956 and a sorghum-sudangrass hybrid, P 988, was studied. The 1st-cut of sorghun hybrids was made for silage 6 times from heading stage at a week-interval and regrowth (2nd-cut) was harvested on Oct. 13 although plants were not reached the same growth stage of 1st-cut. However, the 1st- and 2nd-cut of sorghum-sudangrass were made for green fodder 6 times from 4 weeks before heading stage at a week-interval. 1. Percent dry matter(DM) of 1st-cut of sorghum and 1st- and 2nd-cut of sorghum-sudangrass increased as growth stage advanced. Percent DM of 2nd-cut of sorghum decreased as the 1st-cut date delayed due to insufficient growing period on Oct. 13. 2. In the 1st-cut of sorghum the proportion of leaf blade (LB) or culm+leaf sheath (LS) to total DM decreased, but that of panicle increased as growth stage advanced. The panicle proportion of P 956 increased and culm+LS decreased more rapidly compared with those of P 931. IIowever, in sorghum-sudangrass hybrid the proportion of LB decreased and culmf LS increased as growth stage advanced through heading stage. 3. In the 1st-cut of sorghum hybrids crude(C) protein and C. fiber decreased, but nitrogen free extract (NFE) increased as growth stage advanced although C. fat and C. ash were similar among the growth stages. In the 2nd-cut of sorghum C. protein and C. ash increased, but NFE decreased as harvesting date delayed due to plants were younger although C. fat and C. fiber were similar among the harvesting dates. In the sorghum-sudangrass C. protein of 1st-cut decreased, but C. fiber of 1st-cut and NFE of the 1st-and 2nd-cut increased as growth stage advanced. 4. DM yield of 1st-cut of sorghum increased from heading stage to 3 weeks after heading and then levelled off, but total DM including regrowth was similar among the harvesting time. In the sorghum-sudangrass hybrid DM yield of 1st-cut and total DM yield including 2nd-and 3rd-cut increased as the harvestingtime delayed.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.12 no.2
• /
• pp.106-113
• /
• 2009

In this study, stability of the new gabion system with vegetation base materials was analysed. New gabion system with vegetation base materials is a new approach which has been developed to achieve lope stabilization and revegetation of forest road cut-slope by making the best use of advantages of gabion systems with vegetation base materials. Results from stability analysis are as follows. For the soil density, the angle of internal friction and unit weight of the rock fill was assumed to be $1.90g/cm^3$, $30^{\circ}$ and $2.30t/m^3$, respectively, the slope stability analysis showed that the new gabion system couldn't require any poles to fix it up, and could keep stable during both rainy and dry seasons. As the results of checks against overturning and sliding, the retaining wall with. the new gabion system could produce suitable factors of safety for overturning and sliding. Vegetation established on the surface of the new gabion systems indirectly can help to increase slope stability by prevention of surface erosion. Consequently, the new gabion system with vegetation base materials could achieve the desired effect on slope stabilization as much as existing gab ion system could do, and could promote rapid establishment of vegetation on cut-slopes.

• The Research Journal of the Costume Culture
• /
• v.17 no.4
• /
• pp.575-582
• /
• 2009

The coffee has been used as drink in the world and it has been using not only food but also dyeing. It can be used for four seasons in our normal living and it can be taken friendly everywhere. The coffee consists of about 8${\sim}$10% phenol(chlorogenic acid) that related to antioxidant and antimicrobial activity. However, its exact components and the dyeing property effects has not been well known yet. Therefore, the purpose of this study was to investigate the dyeing property and ultraviolet-cut ability of silk and nylon fabrics that was dyed variously with coffee extracts. Coffee extracts were done by boiling coffee with distilled water at $100^{\circ}C$ for 2 hours. As mordanting agent, we used $AlK(SO_4)_2$ $12H_2O$, $CuSO_4$ $5H_2O$, $FeCl_2$ $4H_2O$. As the result of the dyeing properties and ultraviolet-cut ability of fabrics dyed with coffee bean extracts, we can find that the optimum dyeing temperature and dyeing time of the silk and nylon fabrics dyed with coffee bean extracts was $90^{\circ}C$, 60 min. and the colorfastness of washing and dry-cleaning was improved by using mordanting agent(4${\sim}$5 grade). Ultraviolet-cut ability was showed more 90% in dyed nylon fabrics.

• Food Science of Animal Resources
• /
• v.30 no.6
• /
• pp.1024-1030
• /
• 2010

The focus of the study was to maximize the output data for Korean cuisine. This study evaluated the nutritional retention factor for different cuts of Korean beef (Hanwoo beef) subjected to various cooking methods. Five cuts (short rib, sirloin, chuck roll, tenderloin, and fore shank) of Korean Hanwoo beef were prepared and used in this experiment. Two different cooking methods (dry-heat cooking and moisture-heat cooking) were applied to each cut. The sodium contents of dry-heat cooked short rib (86.44), sirloin (76.81), tenderloin (86.65), and fore shank (85.89) decreased. Potassium contents of dryheat cooked sirloin (94.99), chuck roll (89.19), and fore shank (92.66) decreased. Calcium contents of dry-heat cooked sirloin (61.49), chuck roll (73.97), and fore shank (91.46) decreased. Iron contents of dry-heat cooked chuck roll (79.71), and tenderloin (90.79) decreased. Phosphorus contents of dry-heat cooked sirloin (87.87), and tenderloin (99.88) decreased. Mineral contents of all cuts cooked by moisture-heat decreased. Finally, the nutritional retention factor represents output data of each cooking method with yield % of each item.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.1
• /
• pp.58-64
• /
• 2005

Several tests were conducted to determine the optimum operational conditions of soil washing techniques for floe-forming arsenic-contaminated soils, collected from D abandoned Iron-mine in Korea. The optimum cut-off size was 0.15 mm $(sieve\;\#100)$, about $94\%$ of the mass of soils. Both sodium hydroxide and hydrochloric acid were effective to remove arsenic and the optimum mixing ratio (soil [g] : washing solution [mL]) was 1:5 for both washing agents. Arsenic concentrations, determined by KST Methods, for the dried floe solids obtained from flocculation at pH 5-6 were $990\~1,086\;mg/kg$ dry solids, which were higher concentrations than at the other pH values. Therefore, batch tests for sequential washings with or without removing floc were conducted to find the enhancement of washing efficiencies. After removing floe with 0.2 M HCl, sequential washings of 1 M HCl followed by 1 M NaOH showed the best results (15 mg/kg dry soil). The arsenic concentrations of washing effluent from each washing step were about $2\~3\;mg/L$. However, when these acidic and basic effluents were mixed together, arsenic concentration was decreased to be less than $50\;{\mu}g/L$, due to the pH condition of coagulation followed by precipitation for arsenic removal.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.2
• /
• pp.121-135
• /
• 2016

The present study is an analysis of the monitoring results of the four areas that underwent the experimental construction of Straw-net+seedspray, Vegetation media spray method(t=2cm), and Vegetation media spray method(t=3cm), with the purpose of selecting the adequate revegetation of cutting slopes in weathered granite soil. Cutting slopes are mostly designed in the Straw-net+seedspray method, but since weathered granite soil slopes tend to have an infertile soil quality that runs down, it is difficult for seed germination and growth. It is difficult to apply Straw-net+seedspray to weathered granite soil slopes considering the germination rate and coverage rate of the Straw-net+seedspray method, which accompanies erosion and scouring. The final conclusions are summarized as follows. First, Straw-net+seedspray has difficulty recruiting plants to infertile weathered granite soil, which results in a lower coverage rate and fewer species, so it is not adequate construction method. Second, Vegetation spraying methods with wet media are more advantageous in early revegetation. The wet construction methods are faster than the dry construction methods in terms of early germination and its early growth are more excellent. Third, when constructing Vegetation spray methods with dry media, it were more advantageous if the thickness was thicker. When the soil-media is thicker, the soil is resilient to droughts, so the thickness must be flexibly applied according to the soil quality and slant of the weathered granite soil slope. The present study is a monitoring result for some areas of Gangwon-do, so its results may differ from other areas.