• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.441-446
• /
• 2000

Although the net-shape molding of composites is generally recommended, molded composites frequently required cutting or grinding due to the dimensional inaccuracy for precision machine elements. During the composite machining operations such as cutting and grinding, the temperature at the grinding area may increase beyond the allowed limit due to the low thermal conductivity of composites, which might degrade the matrix of composite. Therefore, in this work, the temperature at the grinding point during surface grinding of carbon fiber epoxy composite was measured. The grinding temperature and surface roughness were also measured to investigate the surface grinding characteristics of the composited. The experiments were performed both under dry and wet grinding conditions with respect to cutting speed, feed speed, depth of cut and stacking angle. From the experimental investigation, the optimal conditions for the composite plain grinding were suggested.

• 한국염색가공학회지
• /
• 제22권1호
• /
• pp.21-27
• /
• 2010

The purpose of this research was to investigate the color characteristic and the dyeing properties of Glycyrrhizae Radix extract on cotton fabrics. The highest absorbance of Glycyrrhizae Radix extract was obtained in 75 v/v% of ethyl alcohol in water. Pre-mordanted cotton fabrics dyed at $30^{\circ}C$ and pH 3 for 80 minutes showed the highest K/S value. According to the dyeing conditions, the colors of the fabrics varied from yellow(Y) and yellowish red(YR) to greenish yellow(GY). The color fastness of the fabrics in dry-cleaning and water was 4~5 rating. The deodorization capacity and UV-cut effect of the dyed fabrics were higher than those of undyed ones.

• 한국생산제조학회지
• /
• 제9권6호
• /
• pp.65-70
• /
• 2000

Although the net-shape molding of composites is generally recommended, molded composites frequently requires cutting or grinding due to the dimensional inaccuracy for precision machine elements. During the composite machining operations such as cutting and grinding, the temperature at the grinding area may increase beyond the allowed limit due to the low thermal conductivity of composites, which might degrade the matrix of composite. Therefore, in this work, the temperature at the grinding point during surface grinding of carbon fiber epoxy composite was measured. The grinding temperature and surface roughness were also measured to investigate the surface grinding characteristics of the composites. The experiments were performed both under dry and wet grinding conditions with respect to cutting speed, feed speed, depth of cut and stacking angle. From the experimental investigation, the optimal conditions for the composite surface grinding were suggested.

• 한국안광학회지
• /
• 제20권4호
• /
• pp.519-526
• /
• 2015

목적: 객관적 검안기기인 OQAS (Optical Quality Analysis System)를 이용하여 눈물막의 불안정성에 따른 객관적 산란지수의 변화를 연속적으로 관찰하고, 이 측정값과 눈물막파괴시간, 쉬르머테스트 및 맥모니테스트와의 상관성을 알아보고자 하였다. 방법: 대학생 82명($21.51{\pm}3.97$세, 남45명, 여37명), 147안을 대상으로 눈물막파괴시간, 쉬르머테스트, 맥모니테스트를 실시하였고, OQAS의 연속 측정방법을 이용하여 순목 직후 15초 동안 매초간의 객관적 산란지수를 측정하였다. 결과: 정상안과 건성안 군의 객관적 산란지수(OSI value)는 각각 $2.13{\pm}1.16$와 $3.76{\pm}1.42$로 통계적으로 유의한 차이를 보였다(p<0.05). 모든 대상자는 측정 시간이 경과할수록 객관적 산란지수가 증가하였고, 순목 직후 매초 측정된 객관적 산란지수는 6초와 7초 사이에 변화량이 가장 크게 증가하였다(p<0.05). 객관적 산란지수 cut off 30%(sec.) 결과는 눈물막파괴시간(r = 0.855, p = 0.000), 맥모니테스트(r = -0.351, p = 0.003), 쉬르머테스트(r = 0.316, p = 0.012) 순으로 상관성이 있는 것으로 나타났다. 결론: OQAS의 연속측정 방법은 기존의 건성안 검사법과 상관성이 높았다. 객관적 산란지수를 이용한 OQAS 검사방법은 환자의 눈물막 상태를 객관적으로 평가하는데 유용하게 사용될 것으로 생각된다.

• 생물환경조절학회지
• /
• 제11권4호
• /
• pp.205-216
• /
• 2002

본 실험은 정식 후 단일처리전 장일처리 기간에 따른 온실재배 스프레이 절화국 (cv. Reagan Improved)의 생육 및 건물생산에 미치는 영향을 구명하기 위하여 네덜란드 Wageningen 대학의 유리온실 실험포에서 수행하였다. 정식에서 개화기까지 3주 장일처리구에서는 84일이었고, 2주 처리구에서는 77일, 1주 처리구에서는 70일,단일처리 후에 최종수확일까지는 63일이 소요되었다. 정식 후 초장 생장량은 3주 장일처리구에서 가장 높았고, 1주 장일처리구에서 가장 낮았다. 또한 정식 후 최종 엽수, 엽면적 확보량 및 엽생체중과 총식물생체중은 3주 장일처리구에서 높고, 1주 장일처리구에서 낮은 결과를 나타내었다. 반면.단일처리 후 절대생장율에 있어서 엽전개속도와 초장생장속도는 모든 처리구에서 동일한 반응을 보였다. 최종건물생산량 (g.m$^{-2}$ )은 3주 장일처리구에서 높고, 1주 장일처리구에서 가장 낮게 나타났다. 초장과 생체중은 장일 조건이 길수록 높게 나타났으며,누적 건물중도 3주 장일처리구에서 가장 높은 결과를 나타냈다.

• 생물환경조절학회지
• /
• 제14권2호
• /
• pp.119-127
• /
• 2005

Mg의 시비농도를 인위적으로 조절한 후 국화를 재배하면서 각 원소의 시비수준이 생육과 절화 품질에 미치는 영향을 구명하고 생육을 우수하게 유지할 수 있는 식물체 및 토양의 한계농도를 밝히기 위하여 수행하였다. Mg 결핍증상은 노엽의 엽맥이 갈변한 후엽 전체로 갈변 현상이 확산되고, 최종적으로 노엽이 탈락하는 특징을 나타내었다 Mg 시비농도가 증가할 수록 정식 109일 후의 절화중이 무거워져 1.5mM 시비 구에서 8.84g이었다. 건물 중은 Mg 시비농도가 증가함에 따라 건물중도 증가하였으나, 2.0mM 이상의 고농도 시비구에서는 오히려 감소하였다. 0.5, 1.0 및 1.5mM 시비구에서의 건물중이 8.42, 8.75 및 8.84g이었고, 최근에 완전히 전개된 잎의 Mg함량이 각각 0.34, 0.53 및 $0.71\%$였다. 따라서 절화국 'Biarritz'의 품질을 우수하게 유지하기 위해서는 가장 최근에 완전히 전개된 잎(최상위에서 $3\~4$번째 잎)의 건물중을 기준으로 $0.64\%$ 이상이 유지되도록 시비해야 하며, 건물중이 가장 무거웠던 1.5mM의 토양 용액내 농도를 고려할 때 $3.68mg{\cdot}L^{-1}$ 이상의 Mg 농도가 되도록 시비하여야 한다.

• 한국초지조사료학회지
• /
• 제41권3호
• /
• pp.147-154
• /
• 2021

Cutting management has been identified as a critical factor in the alfalfa production systems because it has a significant impact on maximizing yield and maintaining the forage quality. The objective of this experiment was to determine the proper cutting height according to harvesting time for optimizing nutrient yield and forage nutritive quality of alfalfa grown in alpine regions of Korea. Alfalfa was sown at a seeding rate of 30 kg/ha in August 2018 and harvested at four cuttings in 2019 (3 May, 2 July, 11 September, and 13 October). Cutting heights were adjusted at 5, 15, and 25 cm above the soil surface. Alfalfa plant was tallest at the third cutting (109 cm), which was on average 35 cm taller than the first or second cutting. Relative feed value (RFV) remained unaffected by cutting height at the first harvest, but increased consistently in subsequent harvests as cutting height increased. Alfalfa collected at the first and fourth cuttings had the highest RFV (mean 152), which was on average 8 and 67 units higher than the second and third harvests, respectively. At each harvest, in vitro dry matter digestibility was highest in alfalfa cut at a 25-cm height. Dry matter (DM) production at each cutting height was highest in the first cutting, accounting for on average 36-37% of total annual DM production, and lowest in the fourth harvest, accounting for about 11-13% of the total DM yield. The total dry matter production (in four harvests) was 4,218 kg/ha higher when alfalfa was subjected to a cutting height of 5 cm rather than 25 cm. Cutting height had no effect on total crude protein yield, but from the first to fourth cutting, the protein yield followed a decreasing trend. Finally, there were visible declines in forage nutritive quality when alfalfa was cut at a shorter height. However, the magnitude of difference in total forage yield may outweigh the slight decline in forage quality when alfalfa is cut at a lower height. The findings of this study could help the alfalfa growers make better harvest management decisions.

• 한국수자원학회논문집
• /
• 제45권4호
• /
• pp.409-418
• /
• 2012

본 연구에서는 가뭄의 심도에 직접적으로 영향을 주는 무강수일수를 고려하고, 강수에서 기인하는 지표면유출 효과를 반영한 가뭄해갈에 유효한 강수를 산정하여 기존의 SPI3을 개선한 Modified SPI를 제시하였다. 1973년부터 2009년까지 각종 보고서 및 문헌자료를 통해 실제 발생한 가뭄사례를 수집하여 행정구역별 가뭄공간정보를 생산하고, 동일기간 전국 69개지점에서산정된 가뭄지수를 우리나라 전체 공간으로표현하여각종 지수의 적합성을 평가하기 위하여ROC 분석을 수행하였다. 개선된 가뭄지수 제시를 위하여 총 강우량 중단기적인 유출에 기여할 것으로 판단되는 부분을 절삭하여 유효강우를 산정하였으며, 월단위의 무강수일수를 십분위, 누적분포함수로 변형하여 기존의 지수에 가중치를 부여하였다. 분석결과 유출량을 고려한 강우의 절삭은 기존의 SPI3에 비하여 상대적으로 높은 가뭄감지능력을 보여주었으며, 무강수일수를 고려한 가뭄지수의 개선은 누적분포함수의 수치를 고려함으로서 상당히 개선된 가뭄감지 능력을 보여주었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권2호
• /
• pp.257-262
• /
• 2016

This study was conducted to compare the physicochemical traits of dry-cured hams made from two different three-way crossbred pigs: Yorkshire${\times}$Landrace${\times}$Duroc (YLD) and Yorkshire${\times}$Berkshire${\times}$Duroc (YBD). Animals were slaughtered at a live weight of 110 to 120 kg and cooled at $0^{\circ}C$ for 24 h in a chilling room, the ham portion of the carcasses were cut and processed by dry-curing for physico-chemical analyses. While the moisture and crude protein contents of dry-cured ham were higher in YLD than in YBD, crude fat and ash content were higher in YBD (p<0.05). The salt contents of ham from YBD were higher than those from YLD (p<0.05). YBD ham samples showed a higher $L^*$ and $b^*$ values than those from YLD, while YBD ham showed lower $a^*$ value (p<0.05). Thiobarbituric acid reactive substances (TBARS) and volatile basic nitrogen (VBN) values of YLD hams were lower than those of YBD samples (p<0.05). Hardness, gumminess, chewiness, and shear force values of YBD ham were higher than those of YLD sample (p<0.05). Saltiness was significantly higher in YBD ham than in YLD samples (p<0.05). YLD ham displayed a superior quality than YBD. Considering the meat quality parameters of two-way crossbred ham, YLD hams could be more suitable for the production of dry-cured products.

• Journal of Plant Biology
• /
• 제17권3호
• /
• pp.118-126
• /
• 1974

Mulberry plants cultivated in mid-Korea were studied on the growth habitat, canopy type, productive structure and vertical light intensity in relation to the quality of mulberry leaves for sericulture. The growth in length of new branch of summer cut mulberry in spring was vigorous on the uppermost of old shoot. Numbers of leaves on a branch were barely 4 leaves on lower than 20th branch from base, but those were 13 leaves on higher than 24th branch. Area of leaves completely expanded was broad on high branch, but narrow on low one. The form of canopy, the type of productive structure and the vertical light distribution depend upon varieties of cultivated mulberry plants were classified according to characteristic of each variety in two groups, respectively; globular and columnar form in canopy, broad leaves and narrow leaves types in productive structure, and seriously obstructured the light and fairly transmitted the light into lower leaf stratum invertical light distribution. Out of varieties of mulberry investigated, Suwon No. 4 and Rosang were belong to the former characters, but Illchiroe and Kaeryangsubun were to the latters. The values of leaf dry matter index and dry matter production produced by leaves were increased in direct proportion to the height of leaf stratum; the leaf dry matter index of the uppermost leaf was twice as much that of the lowest, and the dry matter production by the highest leaf was 17 times compared with that by the lowest leaf. It is assumed that the meagre leaves occurred in the lower leaf stratum of Suwon No. 4 and Rosang were caused to diminished the dry matter index and dry matter production in the under leaves of plant, which were affected by receiving the weak light.