• 한국의상디자인학회지
• /
• 제5권3호
• /
• pp.7-14
• /
• 2003

Fabrics dyed with artemisia extract have quite natural and elegant tones of color. This study purposed to find the best one for dyeing among artemisia collected in the four seasons in order to develop a more efficient method of dyeing with artemisia. As for the method of research, the researcher dyed wool fabric and silk fabric with artemisia, and measured dyeability according to the number of repeats of dyeing, coloration by post-mordant, color fastness to washing, color fastness to dry cleaning and color fastness to light. The results are as follows. 1. In dyeing with artemisia, dyeability was improved as the number of repeat of dying increased, and it was higher in wool fabric than in silk fabric. 2. Among artemisia collected in the four seasons, autumn artemisia had dyeability much inferior to that of artemisia from the other seasons, and winter artemisia had the best dyeability. 3. According to the result of treating fabric with post-mordant, the dyeability was improved significantly, and coloration was most remarkable when copper and iron mordant were used. 4. The color fastness to washing and color fastness to dry cleaning of fabric mordanted with artemisia were as high as grade 4-5 and grade 5 respectively. The color fastness to light was highest in winter artemisia as grade 4.

• 한국염색가공학회지
• /
• 제16권1호
• /
• pp.34-39
• /
• 2004

Dyeing properties of Glycyrrhizae Radix was investigated with silk fabrics. Dyeing water is a type of chalcone, it showed yellow in IR spectrum. K/S value showed high in following conditions; Glycyrrhizae Radix $200g/1\ell4 water, $80^{\circ}$ of dyeing temperature, 90 minute of dyeing time. Glycyrrhizae Radix dyeing water has higher K/S value in alkalinity(pH9) than in neutrality(pH7) or acidity(pH3) conditions. K/S value showed highest in pH5 premordant method of alkalinity dyeing water condition. The color of silk fabric dyed with Glycyrrhizae Radix is yellow. The change of color did not show by mordant treatment. K/S value showed higher in mordant treatment than nonmordant. Light fastness showed over 3 degree in nonmordant, premordant, simmordant(Al,Cu,Fe) and postmordant(Cu). Water fastness showed over 3 degree in dyeing water(pH3, pH5, pH7). Dry cleaning fastness showed over 3 degree in all dyeing methods. Washing fastness is showed in 2-3 degree; Al in nonmordant, premordant, simmordant and Cu in simmordant are 2-3 degree. Perspiration fastness is nearly 3-4 degree in premordant and simmordant. Perspiration fastness shows high in premordant, simmordant than postmordant. The fastness of light, water, dry cleaning, washing, perspiration shows better nonmordant, premordant, simmordant than postmordant method.

• 대한가정학회지
• /
• 제35권2호
• /
• pp.111-122
• /
• 1997

This thesis researched for the conservation of a suit of armor, one glove, one belt, and on knife case that General Jung, Gong-chung had been worn in the early 17 th centuries. The armor was Doojung-kab for the battle. It was made of two kinds of fabrics, one of them was silk satin's outer fabrics, the other was quilt4d cotton's lining. as the armor was made of silk and cotton, it was treated by dry solvents and dry soap. In the dry cleaning method, used solvents were n-hexane, cyclohexane, benzene, and n-decane. the volume ratio of dry soap was 120: 1. The reaction temperature was 30℃, and reaction time was 10 to 30 minutes per one turn. The glove, belt and knife case were made with leather. They were dipped on the polyethyleneglycol 150 saturated solution during 24hours at 50℃ and then dried naturally. They were washed by toluene to remove the untreated pp.E.G. on the surfaces. It was sterilized by two gases of methylenebromide and ethyleneoxied. For the conservation, it was packed thoroughly by ？ polyethylene film sheet without air.

• 한국기계가공학회지
• /
• 제14권5호
• /
• pp.1-7
• /
• 2015

Cleaning by injecting dry ice and water is a generally adopted trend these days to clean molds (injection, diecasting foundry, press, rubber mold, etc). This cleaning method is performed manually, or by installing multiple high pressure spray nozzles. We have manufactured a turbine cleaning module device that is able to clean diecasting modules at any position and angle in the space by mounting an articulated robot instead of the existing pipe type injection nozzle, to minimize lead time and enhance working yield of the cleaning process. In this paper, we analyzed process factors that are required to design the turbine module by reviewing number of revolution, and results according to different blade angles and thicknesses of the mold release injection turbine module, using computational fiuid dynamics (CFD).

• International Journal of Advanced Culture Technology
• /
• 제3권1호
• /
• pp.13-20
• /
• 2015

The self-cleaning properties of nano-zinc oxide on cotton fabrics have been investigated. The cotton fabric has been prepared by pad-dry method. The nano-zinc oxide was encapsulated in the polystyrene particle by mini-emulsion process prior used. The loading amount of zinc oxide particles into the mini-emulsion were various from 1% wt to 40%wt. The particles sizes of ZnO-encapsulated polystyrene mini-emulsion were determined using dynamic light scattering. It was showed that the particle size of the mini-emulsion was in the range of 124-205 nm. The topography and morphology of ZnO-encapsulated polystyrene which coated on cotton fabrics was observed using scanning electron microscopy. The crystal structure of ZnO-coated on cotton fabrics was explored by X-ray diffraction spectroscopy. The photocatalytic activities of zinc oxide were present through the self-cleaning properties. The presents of the zinc oxide on cotton fabrics significantly showed the improving of the self-cleaning properties under UV radiation.

• 한국생산제조학회지
• /
• 제24권2호
• /
• pp.256-262
• /
• 2015

This study has an innovative improvement of the ocher tiles production system that aims to resolve social issue of industrial waste and to meet the customer needs for environmental-friendly building materials. By changing a wet type cutting method to a dry type of ocher tiles production system, the three processes such as cleaning, dehydration, and drying can be removed in existing overall process of 17 steps. Accordingly, the application of the wet type cutting method, which is proposed in this study, makes an increase in ocher tiles production from 1,500 to 1,850 pieces per hour. In particular, industrial wastewater that was emerging as the biggest problem in environmental pollutants in the wet cutting method has been removed. In addition, the most serious problems of noise and dust from the operator side, while developing a device for the dry cutting method, are eliminated through the development of additional equipment.

• 복식문화연구
• /
• 제11권6호
• /
• pp.902-912
• /
• 2003

The purpose of this research was two-folds; first, to investigate the type of soil contaminated in the Hunsang excavated from the Milchang-gun burial of Mapo for the purpose of proposing the adequate washing method, second, to utilize the chemical degradation result obtained from the previous research to identify the natural dye source used in the Hunsang textile. The application of KS K0251 test showed that the soil was more oleophilic than hydrophilic thus indicating that wet cleaning was more adequate that dry cleaning for the removal of Hunsang soil. The GC-MS result of the Hunsang extraction showed dimethyl phthalate and 2,4-di-tert-butylphenol as its degradation product and these coincided with the degradation products from the alizarin standard data of previous research. The comparison of the two suggested that it is likely that Hunsang was dyed with madder which has alizarin as its major chromophore.

• 한국염색가공학회지
• /
• 제12권3호
• /
• pp.183-191
• /
• 2000

The dyeing of silk fabric with chinese scholar tree extract was investigated. The colorant was extracted with distilled water, and concentrated under reduced pressure, and, finally spray-dried. The optimum temperature and dyeing time for the dyeing of silk with the scholar tree extract was $60^\circ{C}$ and 60 minutes respectively. In mordant dyeing, pre-mordanting method was most effective for color yield, and 1~2 % of mordant concentration was acceptable. Fastness of the dyed silk fabric to laundering and rubbing was shown to be good, but fastness to light, dry cleaning, and perspiration were varied with used mordants.

• 조명전기설비학회논문지
• /
• 제27권2호
• /
• pp.77-83
• /
• 2013

In this study, we aimed to determine the optical properties of the plasma used for the dry cleaning method. The optical properties of the atmospheric pressure plasma device were measured through the degree of ionization of hydrogen or nitrogen gas by ionized atmospheric gas. The degree of ionization of hydrogen or nitrogen is closely associated with surface modification. We observed through our experiments that argon gas, an atmospheric gas, caused an increase in the ionization of nitrogen gas, which has similar ionization energy. This type of increase in nitrogen gas ions is believed to affect surface modification. The results of our study show that the pressure of argon gas and the partial pressure of argon and nitrogen gases lead to different results. This important result shows that argon ions can affect the ionization of nitrogen gas.

• 한국염색가공학회지
• /
• 제25권4호
• /
• pp.314-326
• /
• 2013

The purpose of this research is to analyze the effects of Dansam and Sappan wood extract to perform combination dyeing on silk fabrics, with respect to color changes, fastness (washing, dry cleaning, perspiration, rubbing and light fastness), and functionality (antibacterial activity and deodorization). Combination dyeing was performed by first combining Dansam with Sappan wood, then Sappan wood with Dansam, in these orders. Given the changes in the combination ratio, pre-mordant treatment was performed. Looking at the surface colors of each dye, Dansam generally produces YR color series, while Sappan wood produces YR, R, and RP color series. The effects of changing the order in which combination dying was performed on the surface colors were as follows. First, combination dyeing (A) was performed by using Dansam before Sappan wood, to produce YR and R color series. Then combination dyeing (B) was performed by using Sappan wood before Dansam, to produce YR, R, and RP color series. By visual inspections, more similar color changes of the combination dyeing were noticed with the post-dyeing material rather than the pre-dyeing material. Therefore, it was presumably confirmed that surface color changes of combination dyeing were greatly influenced by the post-dyeing color. Individual dyeing tests for fastness showed that Dansam was comparatively superior to Sappan wood, which demonstrated lower fastness to washing, dry cleaning, perspiration, and light, relatively. The fastness of combination dyed samples was shown middle, but similar fastness to the post-dye material, The fastness of (B) method was higher than (A) method in the washing and light fastness. This confirms that color fastness from combination dyeing was considerably influenced by the post-dye material. It was found that all dyed samples had a very high bacterial reduction rate of 99.9% and high deodorization rate of 95%.