• 제목/요약/키워드: Dry and Wet Feeding

검색결과 46건 처리시간 0.028초

Vitrification of Simulated Combustible Dry Active Wastes in a Pilot Facility

  • Yang, Kyung-Hwa;Park, Seung-Chul;Lee, Kyung-Ho;Hwang, Tae-Won;Maeng, Sung-Jun;Shin, Sang-Woon
    • Nuclear Engineering and Technology
    • /
    • 제33권4호
    • /
    • pp.355-364
    • /
    • 2001
  • In order to evaluate and finally optimize the vitrification condition for combustible dry active waste (DAW), dust and gas generation characteristics were investigated for PE, cellulose, and mixed waste Tests were conducted by varying the operation variables such as melter configuration, excess oxygen amount, and waste feeding rate. Results showed that dust generation characteristics were affected by the operation parameters and the melter's configuration is the dominant one. For all tested DAWs, dust generation was reduced by increasing the waste feeding rate and the excessive oxygen amount in the melter. Among waste types, dust amount was decreased by the order of mixed wastes, PE, and cellulose. Other parameters such as temperature variation and operation time have also affected the dust generation. The optimum condition for the DAW vitrification was determined as the melter's configuration equipped for minimizing the waste dispersion with 20 kg/h of waste feeding rate and 100% of excessive oxygen supply. CO gas concentration in the off-gas was immediately influenced by the combustion state in the melter, but showed similar trend as the dust generation. For the NOx production during the vitrification process, thermal NOx, which is generated from the Post Combustion Chamber (PCC), rather than fuel NOx was assumed to be dominant. The gas cleaning of efficiencies of the PCC, wet scrubber, and Selective Catalytic Reduction system (SCR) were found to be high enough to keep the concentration of pollutants (CO, NOx, SOx, HCI) in the stack below their relevant emission limits.

  • PDF

도심하천과 자연하천의 식생형에 따른 조류 서식지 유형분석 (Classification of Avian Habitats Based on Vegetation Types in Urban and Natural Streams)

  • 표재훈;유영한
    • 한국습지학회지
    • /
    • 제13권1호
    • /
    • pp.67-77
    • /
    • 2011
  • 우리나라 중부지역에 입지하는 3개 하천(안양천, 갑천, 섬강)을 대상으로 식생형에 따른 조류의 서식 유형을 파악하였다. 식생 유형은 교목형, 관목형, 장경-습생초지형, 단경-건생초지형, 기타 경작지형 등 5가지 유형이었다. 식생형과 출현 조류는 상관성이 높았는데, 교목형에서는 멧비둘기(Streptopelia orientalis) 및 직박구리(Hypsipetes amaurotis) 등의 종이, 관목형에서는 붉은머리오목눈이(Paradoxornis webbiana), 딱새(Phoenicurus auroreus) 등이, 장경 및 습생초지에서는 덤불해오라기(Ixobrychus sinensis), 개개비(Acrocephalus arundinaceus)등이, 단경초지에서는 꿩(Phasianus colchicus), 황조롱이(Falco tinnunculus) 등의 종이, 경작지에서는 중대백로(Egretta alba modesta), 흰뺨검둥오리(Anas poecilorhyncha) 및 밭종다리(Anthus spinoletta) 등의 종이 각각 번식 및 채식지로 이용하였다. 현존식생 및 입지유형에 따라서 조류의 종별 분포유형이 뚜렷이 구분되었다.

SCM415의 절단가공이 표면조도와 재료 두께에 미치는 영향 (Effect of Cutting off Processing SCM415 on Surface Roughness and Thickness of Materials)

  • 김진수;강성기;신미정
    • 한국기계가공학회지
    • /
    • 제12권2호
    • /
    • pp.20-26
    • /
    • 2013
  • This study focused on how it affects the surface roughness of work piece in cutting SCM415 steel, widely used steel in industry, by TiCN and TiN tools. Following conclusion was drawn from several experiments. The surface roughness of heat treated workpiece was better than that of non heat-treated materials. Moreover, the roughness of surface roughness(Ra 0.25) on feeding rate of 0.05 was better when it was in wet process, rather than dry process. As the feeding rate increases, TiCN coating tool shows better roughness of surface than TiN tool. Also, in heated treatment, TiCN coating tool shows the least straightness dimension deviation at feeding rate of 0.05, 0.15mm/rev, and concave-like R shape appears by the feeding rate orders of 0.05, 0.15, 0.1, 0.125 and 0.075mm/rev.

상용급 석탄가스화플랜트 최적설계에 관한 연구 (A study on the engineering optimization for the commercial scale coal gasification plant)

  • 김병현;민종선;김재환
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2010년도 추계학술대회 초록집
    • /
    • pp.131.1-131.1
    • /
    • 2010
  • This study was conducted for engineering optimization for the gasification process which is the key factor for success of Taean IGCC gasification plant which has been driven forward under the government support in order to expand to supply new and renewable energy and diminish the burden of the responsibility for the reduction of the green house gas emission. The gasification process consists of coal milling and drying, pressurization and feeding, gasification, quenching and HP syngas cooling, slag removal system, dry flyash removal system, wet scrubbing system, and primary water treatment system. The configuration optimization is essential for the high efficiency and the cost saving. For this purpose, it was designed to have syngas cooler to recover the sensible heat as much as possible from the hot syngas produced from the gasifier which is the dry-feeding and entrained bed slagging type and also applied with the oxygen combustion and the first stage cylindrical upward gas flow. The pressure condition inside of the gasifier is around 40~45Mpg and the temperature condition is up to $1500{\sim}1700^{\circ}C$. It was designed for about 70% out of fly ash to be drained out throughout the quenching water in the bottom part of the gasifier as a type of molten slag flowing down on the membrane wall and finally become a byproduct over the slag removal system. The flyash removal system to capture solid particulates is applied with HPHT ceramic candle filter to stand up against the high pressure and temperature. When it comes to the residual tiny particles after the flyash removal system, wet scurbbing system is applied to finally clean up the solids. The washed-up syngas through the wet scrubber will keep around $130{\sim}135^{\circ}C$, 40~42Mpg and 250 ppmv of hydrochloric acid(HCl) and hydrofluoric acid(HF) at maximum and it is turned over to the gas treatment system for removing toxic gases out of the syngas to comply with the conditions requested from the gas turbine. The result of this study will be utilized to the detailed engineering, procurement and manufacturing of equipments, and construction for the Taean IGCC plant and furthermore it is the baseline technology applicable for the poly-generation such as coal gasification(SNG) and liquefaction(CTL) to reinforce national energy security and create new business models.

  • PDF

Age-related digestibility of nutrients depending on the moisture content in aged dogs

  • Kim, Ki Hyun;Seo, Kangmin;Cho, Hyun-Woo;Jeon, Jung-Hwan;Kim, Chan Ho;Jung, Jiyeon;Chun, Ju Lan
    • Journal of Animal Science and Technology
    • /
    • 제63권6호
    • /
    • pp.1355-1361
    • /
    • 2021
  • Digestibility of pet food can affect the health of dog, especially of aged animals. To maintain the health of dogs in an overall good status it is necessary to provide nutritionally balanced food. For example, the digestibility of dogs was known to be decreased along aging. In addition, losing teethes is an often event in aged dogs that could induce a problem to eat a large size dry pet food. Nonetheless, few detailed information is available on the most suited feeding for aged dogs. As part of the nutritional study of food for aged dogs, in this study, we tested whether food type impacts on digestibility on adult versus senior dogs. The methodology to measure the digestibility of nutrients was chosen the index method using chromium oxide. Dogs were fed the same commercial dry or wet diets, which were supplemented with 0.5% chromium oxide. The wet food was prepared by adding twice volume of water in the dry food prior to incubated overnight (14-16 hours) at room temperature. After five days, their feces were collected up to a total weight of > 200 g which was the amount to analyze undigested nutrients in feces as 3 repeats. In the apparent total tract digestibility analysis of the experimental breed, no difference in the digestibility of crude protein, crude fat, crude fiber, ash, and energy was observed regarding the moisture content of the food. Noteworthy, the digestibility of nitrogen free extract was significantly increased in senior dogs fed dry dog food compared with adult dogs fed the same diet, whereas no difference was observed between senior and adult dogs fed wet food. The small breed dogs showed similar results to the experimental breed dogs. However, the digestibility of crude fat was additionally affected by age and food type unlike the experimental breed dogs. This finding suggests that the food moisture content affects the digestibility of nutrients in dogs with aging. Hence, it may be helpful to determine the nutrient contents in foods for senior dogs depending on the food type.

마찰식 박피마늘 선별기 개발 (Development of A Friction Type Garlic Separator)

  • 박재복;김종태
    • Journal of Biosystems Engineering
    • /
    • 제19권3호
    • /
    • pp.185-193
    • /
    • 1994
  • Both the wet and dry types of garlic peeling machines are being presently used in domestic garlic processing factory, but the dry type is more popular than the wet type because of higher peeling efficiency. The peeling efficiency of these machines is estimated 50 to 80%, depending on the difference in garlic varieties, physical properties and moisture content of garlic samples. If the peeling time is increased in order to improve the peeling efficiency, the damage on the surface of peeled garlic and the consumption of electric power are also increased. This study was carried out to solve these problems in garlic peeling operation and to obtain the optimun design factor for the friction type separator. The results are summarized as follows : 1. The average friction coefficients of peeled and unpeeled garlic samples were 0.91 and 0.51. respectively, for the acrylic plate, and 0.96 and 0.51, respectively, for the stainless plate. 2. For the inclined acrylic pipe with the pipe length 90 cm, the inclined angle $39^{\circ}$ and the pipe diameter 45-55 mm, the falling time of peeled garlic samples was 0.2 sec, faster than unpeeled garlic samples. 3. For the inclined stainless pipe with the pipe length 90 cm, the inclined angle $34^{\circ}$, $39^{\circ}$ and the pipe diameter pipe 35 mm, the falling time of peeled garlic samples was 0.7 sec, slower than that with the pipe diameter 47mm. 4. The stainless pipe with the pipe length 80~90 cm, the inclined angle $39^{\circ}{\sim}40^{\circ}$ and the pipe diameter 40~50 mm was the most suitable as the material of friction pipe. 5. Experimental garlic peeling machine is composed of garlic sample feeding device, friction stainless pipe and hopper. The peeling efficiency was 81 to 96%, and the separating capacity, 600 gr/min.

  • PDF

버섯폐배지와 맥주박 첨가 섬유질발효사료 급여가 흑염소의 생산성, 사료섭취량 및 영양소 소화율에 미치는 영향 (Effects of Total Mixed Fermentations with Spent Mushroom (Flammuliua velutipes) and Wet Brewer's Grain on Growth Performance, Feed Intake and Nutrient Digestibility in Korean Black Goats)

  • 황보순
    • 한국초지조사료학회지
    • /
    • 제34권1호
    • /
    • pp.45-51
    • /
    • 2014
  • 본 연구는 버섯폐배지와 맥주박을 이용한 섬유질 발효사료의 급여효과를 알아보기 위해 흑염소의 생산성과 영양소 이용율을 조사하였다. 증체조사를 위한 사양 시험은 거세흑염소 20두를 이용하여 처리구당 5두씩 30일간 수행하였고, 소화율 시험은 거세흑염소 12두를 공시하여 처리구당 3두씩 라틴방각법으로 실시하여, 처리구는 대조구(배합사료 및 볏짚 급여구)와 3개의 시험구(버섯폐배지, 맥주박 비율이 각각 15와 25%(T1), 10과 30%(T2) 및 5와 35%(T3))로 각각 배치하였다. 일당증체량은 대조구와 T1구가 T3구 보다 유의하게 높게 나타났다(p<0.05). 1일 두당 건물섭취량과 유기물섭취량은 T1과 T2구가 대조구 보다 유의하게 높은 섭취량을 보였다(p<0.05). 건물소화율과 유기물소화율은 대조구와 T1구가 각각 62.39∼63.39%와 65.02~65.25%로 T3구의 각각 56.39와 59.01% 보다 유의하게 높게 나타났다(p<0.05). 질소축적량은 T1구가 가장 높게 나타났다(p<0.05). 따라서, 본 연구의 결과 버섯폐배지와 맥주박을 이용한 섬유질 발효사료는 시판사료를 급여한 대조구와 대등한 생산성과 영양소 이용율을 보였다. 그러나 버섯폐배지의 첨가 비율이 높아질수록 흑염소의 생산성 저하가 우려되므로 버섯폐배지 첨가는 25~30% 수준으로 배합하는 것이 필요하다 판단된다.

Effects of dietary probiotic, liquid feed and nutritional concentration on the growth performance, nutrient digestibility and fecal score of weaning piglets

  • Zhang, Song;Yoo, Dong Huy;Ao, Xiang;Kim, In Ho
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제33권10호
    • /
    • pp.1617-1623
    • /
    • 2020
  • Objective: This study was conducted to investigate the effects of dietary probiotic blend and liquid feed program at different nutritional densities on growth performance, nutrient digestibility, fecal score of weaning piglets. Methods: A total of 120 weaning pigs with an initial body weight of 7.05±0.93 kg per pig (21 days of age) were randomly allocated into 1 of the following 8 dietary treatments (3 replicates per treatment with 5 pigs per replicate) in a 2×2×2 factorial arrangement (nutrition levels: apparent metabolic energy [AME] = 3,500 kcal/kg, crude protein [CP] = 20% vs AME = 3,400 kcal/kg, CP = 19.42%; feed types:dry vs wet; probiotics levels: 0 mg/kg vs 300 mg/kg). Results: During d 5 to d 15, greater average daily gain (ADG) and average daily feed intake (ADFI) (p<0.05) were observed in probiotics treatments. During d 15 to d 25, gain:feed (G:F) ratio (p<0.05) were significantly improved in probiotics, wet feed and high nutrition diet. Moreover, two interactions i) between nutrition levels and feed types, and ii) between nutrition levels and probiotics were found in G:F ratio. Furthermore, there was a significant positive interaction on G:F among those 3 factors (p<0.05). Overall, increasing ADG, ADFI, and G:F ratio were detected in probiotics treatment significantly (p<0.05). Besides, an obvious reduction on fecal score was observed in probiotics treatment from d 0 to d 5 (p<0.05). There was an interactive effect on fecal score between feed types and nutrition concentrations from d 5 to d 25 (p<0.05). Conclusion: These results indicated that probiotics supplementation could benefit growth performance and reduce the frequency of watery feces. Besides, wet feed program (feed:water = 1:1.25) could improve the G:F. The effect of liquid feed or probiotic could be influenced by dietary nutrition density in weaned piglets. An increased value of G:F was obtained when wet feeding a high nutrition diet (100 kcal higher than NRC 2012 recommendations) was supplemented with probiotics for 15 to 25 days.

Fisheries in Lake Tinishu Abaya (Ethiopia) could be managed using dietary nature of Nile tilapia (Oreochromis niloticus L. 1757)

  • Yirga Enawgaw Anteneh;Solomon Wagaw Mamo;Minichil Addis Tilahun
    • Fisheries and Aquatic Sciences
    • /
    • 제26권8호
    • /
    • pp.491-499
    • /
    • 2023
  • Lake Tinisu Abaya is home to some fish species. The lake's native fish species include Barbus and Tilapia zilli. Tilapia fish (Oreochromis niloticus L.) were stocked in Lake Tinishu Aabaya in 1997. This study aimed to investigate the feeding behaviors of O. niloticus in Lake Tinishu Abaya to develop an appropriate fisheries management approach in the lake. 428 O. niloticus fish samples (2.5 to 30.9 cm and 1.1 to 475 g) were collected to calculate the diet composition. Out of the total of 428 gut contents examined, 55 (12.85%) were found to be empty and 373 (87.15%) to be containing one or more food items. The diet behavior of the stocked fish in the study lake revealed that phytoplankton (39.5% by volume) and macrophytes (25.81% by volume) were the most noteworthy food items followed by detritus (14.39%) and zooplankton (12.95%). With increasing fish size, the importance of phytoplankton, macrophytes, and detritus increased while the contribution of zooplankton, insects, and other foods with an animal origin decreased. Seasonal variation in the diet composition of fish was evident (t-test; p < 0.05). Macrophytes, zooplankton, and detritus were the dominating food items during the wet season, while phytoplankton predominated during the dry season. This study demonstrated that O. niloticus had phytoplanktivores that primarily consumed phytoplankton and that the seasons and fish size had a significant impact on their feeding preferences. The diet of O. niloticus in Lake Tinishu Abaya comprised foods with both plant and animal origins. It concludes that the dietary habit of O. niloticus in the lake is, generally, the omnivorous type.

Studies on the Use of Wet Sorghum Distiller's Grains in Lactating Cows

  • Chiou, P.W.S.;Chang, S.H.;Chiang, J.K.;Yu, B.;Chen, C.R.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제12권6호
    • /
    • pp.895-900
    • /
    • 1999
  • The aim of this study was to evaluate the effect of incorporating wet sorghum distiller's grains (WSDG) as part of their diet on the lactating performance of dairy cows. Twenty-seven Holstein milking cows were selected, all in the early lactating stage, with an average weight of 550 kg, and producing an average of 30 kg of milk daily. The cows were divided into three groups according to milk yield and lactation and were fed different total mixed rations. The diets were formulated according to NRC (1989) recommendations in three rations to (1) control diet, (2) 15% WSDG diet and (3) 30% WSDG diet. The three different diets were all formulated as iso-nitrogen and iso-energetic diets. After one week adaptation period, the experimental feeding was conducted for 8 weeks. Three ruminal cannulated cows were also examined in order to investigate ruminal fermentation of the three total mixed rations. The results showed that the milk yield, as corrected to the 4.0% fat standard, had no significant difference among the control, 15% WSDG and 30% WSDG treatment groups (p>0.05). The daily dry matter intake of the control group was higher than the other groups (p<0.05). with respect to milk composition, milk fat, milk protein and total solids, there was no significant difference among the treatment groups (p>0.05). The energy efficiency of the 30% WSDG group were significantly higher than the other treatment groups (p<0.05). Ruminal pH value showed no difference among the treatment groups (p<0.05). Ammonia-nitrogen concentration in the control group was higher than the other treatment groups (p<0.05). The concentration of total ruminal volatile fatty acid was similar in all three dietary groups.