• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.218-220
• /
• 1996

A composite films were prepared by using Polyphenylenediamine(PPD) synthesized in our lab. and crystalline V$_2$O$_{5}$ in various mixture ratio for using positive active material of polymer film battery. The thermal stability of prepared composite film was carried out by using TGA. Electrical conductivity of composite film were also measured by using four-probe method in dry box. The thermal stability of prepared composite film is more than 35$0^{\circ}C$. The electrical conductivity of composite film increased and showed the highest value(about 23 S/cm) when doped at 0.4% LiCiO$_4$solution.n.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.105-108
• /
• 1996

The positive active material for polymer film battery was prepared by using Polyphenylenediamine(PPD) synthesized in our lab. and 2.5-dimercapto-1, 3, 4-thiadiazole(DMcT) in various mixture ratio. The transference measurement of surface morphology and thermal stability of prepared composite film was carried out by using SEM and TGA, respectively. Electrocyhemical property and electrical conductivity of composite film were also measured by using cyclic voltammetry and four-probe method in dry box, respectively. The thermal stability of prepared composite film is more than 20$0^{\circ}C$. The electrical conductivity of composite film increased and showed the highest value(about 3 S/cm)when doped at 0.4% LiClO$_4$solution. And we could confirm that DMcT effect on reactiviation of PPD through cyclic voltammogram.

• Journal of the Korea Furniture Society
• /
• v.11 no.1
• /
• pp.37-44
• /
• 2000

This work was done to investigate problems of cashew coating in a wooden-art industry such as ritual vessels and to improve a curing property of cashew film. The main problem in the cashew coating industry was a small-scale business, insufficiency of facilities, lack of knowledge about cashew resin and painting, and lack of a technology of productivity improvement by accelerated drying time of cashew film. In present, cashew coating for ritual vessels mostly used the petroleum as a thinner. The time of set to touch of cashew film thinning with petroleum on glass plates was increased with the increasement of the thinning proportion, but retarded from 3 to 11 times compared to that of an exclusive thinner according to thinning level. The addition of 20% aceton to petroleum contributed to the high reduction rate up to about 60% at the thinning level of 100%, which was effective to accelerate the drying time of cashew film. Even though only the petroleum or the petroleum-aceton(20%) mixture was used as a thinner, it did not exhibit any distinguishable differences in crack and appearance of cashew-film coated on Frexinus rhynchophylla after 5 cycles of soak under the vacuum-drying treatment.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1128-1133
• /
• 2008

Drying process in the thin film layer of sludge with the thickness less than a few millimeters has been investigated using the simple one-dimensional model. Thin film drying is usually used to dry the viscous materials like sewage sludge. The thin film layer of sludge is dried on the metallic surface through which thermal energy is supplied to the layer during drying. In order to solve the equations, the mass transfer rate on the drying surface should be determined. The mass flux of evaporated water vapor on the surface is estimated with the formulation given in the literature. The effect of heating temperature, film thickness, and air velocity on drying has been examined to figure out the drying characteristics of the sludge layer.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.3 no.1
• /
• pp.19-28
• /
• 1973

The author has studied maxillo-facial anatomical landmarks using Status X with two methods. The one has performed by application of contrast media on the human dry skull, the other has performed on living human skull as control group. Comparing the panagraphs taken by two methods, the author has drawn following results: 1. The panagraphs revealed the undistorted, highly sharp panoramic shadows of each jaw on a film. 2. Diminishing the inserted anode tube overlapping-free representation of the anterior teeth was taken. 3. Alternating the head position of the objects, direction of anode tube and film placing, the shadows of temporo-mandibular joint and zygomatic arch were taken without overlapping the other bone tissues. 4. In the panagraphs applied various shaped contrast media to each anatomical landmark, a radio-anatomical atlas which is necessary to interpret various bone tissues was taken. 5. In order to interpret panagraphic shadows easily, the author has tried this study by comparing the films of the living human skull with the films of the human dry skull applied contrast media.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1504-1507
• /
• 2009

In this paper, the etching behavior of ZnO in $CF_4$ plasma mixed Ar was investigated. Previously, the etch rate in $CF_4$/Ar plasma was reported that it is slower than that in Cl containing plasma. But, plasma included Cl atom can produce the by-product such as $ZnCl_2$. In order to solve this film contamination, no Cl containing etching gas is required. We controlled the etching parameter such as source power, substrate bias power, and $CF_4$/Ar gas ratio to acquire the fast etch rate using a ICP etcher. We accomplished the etching rate of 144.85 nm/min with the substrate bias power of 200W. As the energetic fluorine atoms were bonded with Zinc atoms, the fluoride zinc crystal ($ZnF_2$) was observed by X-ray photoelectron spectroscopy (XPS).

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.8
• /
• pp.1436-1440
• /
• 2007

Beryllium copper has been known to be an important material for the various fields of industry because it can be used for mechanical and electrical/electronic components that are subjected to elevated temperatures (up to $400^{\circ}C$ for short times). Blade type tip for probing the cells of liquid crystal display(LCD) was fabricated using beryllium copper foil. The dry film resist was employed as a mask for patterning of the blade type tip. The beryllium copper foil was etched using hydrochloric acidic iron-chloride solution. The concentration, temperature, and composition ratio of hydrochloric acidic iron-chloride solution affect the etching characteristics of beryllium copper foil. Nickel with the thickness of $3{\mu}m$ was electroplated on the patterned copper beryllium foil for enhancing its hardness, followed by electroplating gold for increasing its electrical conductivity. Finally, the dry film resist on the bridge was removed and half of the nickel was etched to complete the blade type tip.

• Tribology and Lubricants
• /
• v.16 no.3
• /
• pp.188-193
• /
• 2000

An experimental study was performed to discover the effect of environment on the tribological behavior of Si-incorporated diamond-like carbon(Si-DLC) film slid on a steel ball. The films were deposited on Si(100) wafers by a radio-frequency glow discharge of mixtures of benzene and dilute silane gases. Experiments using a ball-on-disk test-rig was performed in vacuum, dry air and ambient air conditions. It was observed that coefficient of friction decreased as the environment changed from vacuum, to dry air. Chemical analyses of debris suggested that low and stable friction is closely related to the formation of silicon-rich oxide debris and the rolling action.

• Korean Journal of Materials Research
• /
• v.16 no.3
• /
• pp.151-156
• /
• 2006

A method for fabrication of nano-scale GaN structure by inductively coupled plasma etching is proposed, exploiting a thermal dewetting of Pt thin film as an etch mask. The nano-scale Pt metal islands were formed by the dewetting of 2-dimensional film on $SiO_2$ dielectric materials during rapid thermal annealing process. For the case of 30 nm thick Pt films, pattern formation and dewetting was initiated at temperatures greater $600^{\circ}C$. Controlling the annealing temperature and time as well as the thickness of the Pt metal film affected the size and density of Pt islands. The activation energy for the formation of Pt metal island was calculated to be 23.2 KJ/mole. The islands show good resistance to dry etching by a $CF_4$ based plasma for dielectric etching indicating that the metal islands produced by dewetting are suitable for use as an etch mask in the fabrication of nano-scale structures.

• Tribology and Lubricants
• /
• v.12 no.3
• /
• pp.107-114
• /
• 1996

MoS$_{2}$ bonded film was applied to reduction gears, and its lubricating properties were experimentally evaluated in terms of the power transmission efficiency and the frictional noise with a dynamo-typed gear test rig. Tests were performed in both oil lubrication and dry condition where the rotating velocity and loading torque were varied. In dry condition, MoS$_{2}$ bonded films effected the power transmission efficiency to increase about 5%, and the frictional noise level to decrease about 6 dB under the test operating conditions. It well proved that MoS$_{2}$ bonded films were a very effective solid lubricant for reduction gears. In oil lubricating conditions, the frictional properties of the coated gears were mainly governed by the lubricating oil, and lubricating effects of MoS2 bonded films were not evident. The result suggested that lubricating effect of MoS$_{2}$ bonded films would be limited to prevent a damage of reduction gears in the initial run when they were used in oil lubrication conditions.