• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.2
• /
• pp.77-84
• /
• 2001

To increase the utilization of soil survey results, classification of morphological types of paddy soils which was consisted of land-form, texture, and drainage classes etc. was attempted as an interpretive classification system. The paddy soils could be classified into 37 types. Among the types, the "Lfi(Fine loamy textured semi-wet paddy on local valley and fans)" acreage of about 224 thousand ha, "Lfd(Fine loamy textured dry paddy on local valley and fans)" 160 thousand ha. "Lmi(Coarse loamy textured semi-wet paddy on local valley and fans)" 112 thousand ha, and "Lkd(Loamy skeletal dry paddy on local valley and fans)" 93 thousand ha, respectively were the dominant types. The possibility of double cropping, plastic film house, green manure cropping etc., and that for soil managements such as application of raw straw or compost, deep plowing or adding fine earth materials, mole drainage, susceptibility to erosion or reduction injury etc. for each types were recommended.

• Horticultural Science & Technology
• /
• v.28 no.3
• /
• pp.492-496
• /
• 2010

This experiment was carried out to obtain the maximum quantity of essential oil on the basis of harvesting time, cultivation regions & types, and drying methods. We have selected 6 native and introduced herbs viz. $Thymus$ $quinquecostatus$, $Agastache$ $rugosa$, $Chrysanthemum$ $indicum$, $Rosmarinus$ $officinalis$, $Chamaemelum$ $nobile$, and $Lavandula$ $stoechas$. The quantity of essential oil ranged from 0.06% to 3.46% in all six herbs. Native herbs produce 30.5% higher quantity of oil in comparison to introduced herbs. The quantity of essential oil obtained from $Lavandula$ $stoechas$ was 3.46%, followed by $Rosmarinus$ $officinalis$ 2.89%, while minimum in $Agastache$ $rugosa$ 0.60%. Higher quantity of essential oil obtained if they are cultivated under rain shelter culture (PE film) in comparison to open field conditions. Recovery of essential oil is always high if herbs flower in July. Semi-alpine region was found better than the plain region for herbs production. Quantity of oil is high if oil is extracted from fresh herbs followed by freezed herbs, shade dry and hot wind dry herbs. As far as plant part is concern flower produced maximum oil than any other part.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.4
• /
• pp.29-32
• /
• 2009

Dense and periodic arrays of nano-sized holes were patterned in oxide thin film on GaAs substrate. To obtain the nano-size patterns, self-assembling diblock copolymer was used to produce thin film of uniformly distributed parallel cylinders of polymethylmethacrylate (PMMA) in polystyrene (PS) matrix. The PMMA cylinders were removed with UV expose and acetic acid rinse to produce PS nanotemplate. By reactive ion etching, pattern of the PS template was transferred to under laid silicon oxide layer. Transferred patterns were reached to the GaAs substrate by controlling the dry etching time. We confirmed the achievement of etching through the removing oxide layer and observation of GaAs substrate surface. Optimized etching time was 90 to 100 sec. Pore sizes of the nanopattern in the silicon oxide layer were 20~22 nm.

• Imaging Science in Dentistry
• /
• v.32 no.2
• /
• pp.75-79
• /
• 2002

Purpose : To evaluate the effect of exposure time and image resolution on fractal dimension calculations for determining the optimal range of these two variances. Materials and Methods : Thirty-one radiographs of the mandibular angle area of sixteen human dry mandibles were taken at different exposure times (0.01, 0.08, 0.16, 0.25, 0.40, 0.64, and 0.80 s). Each radiograph was digitized at 1200 dpi, 8 bit, 256 gray level using a film scanner. We selected an Region of Interest (ROI) that corresponded to the same region as in each radiograph, but the resolution of ROI was degraded to 1000, 800, 600, 500, 400, 300, 200, and 100 dpi. The fractal dimension was calculated by using the tile-counting method for each image, and the calculated values were then compared statistically. Results: As the exposure time and the image resolution increased, the mean value of the fractal dimension decreased, except the case where exposure time was set at 0.01 seconds (α = 0.05). The exposure time and image resolution affected the fractal dimension by interaction (p<0.001). When the exposure time was set to either 0.64 seconds or 0.80 seconds, the resulting fractal dimensions were lower, irrespective of image resolution, than at shorter exposure times (α = 0.05). The optimal range for exposure time and resolution was determined to be 0.08- 0.40 seconds and from 400-1000 dpi, respectively. Conclusion : Adequate exposure time and image resolution is essential for acquiring the fractal dimension using tile-counting method for evaluation of the mandible.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.6
• /
• pp.543-547
• /
• 1990

Diurnal courses of $CO_2$ concentration and air temperature in the rice seedbed tunnel covered with polyethylene film, subjected to three different ventilation methods, were traced. Regaredless of ventilation methods, $CO_2$ concentrations in the tunnel on a clear day were lower than that in ambient air, and vice versa before dawn. $CO_2$ concentration during the day was lowest in the tunnel with non-ventilation (NV), followed by horizontal slit ventilation (HSV) and traditional one(TN), reaching down to the lowest level of 58ppm, 155ppm and 272ppm, respectively. Air temperature in the tunnel reached 46$^{\circ}C$ in NV, 37$^{\circ}C$ in HSV and 32$^{\circ}C$ in TV at the daytime when ambient air temperature was 22$^{\circ}C$. Even at night time of ambient air temperature below 15$^{\circ}C$, HSV was more effective than TV in raising the air temperature in the tunnel. The dry weight of 40-day old seedling weighed heaviest in HSV, followed by TV and NV.

• Journal of the Korean Vacuum Society
• /
• v.6 no.2
• /
• pp.122-128
• /
• 1997

In this study, the PVDF organic thin films were fabricated by thermal evaporation deposition which is one of the dry-processing methods. The distance from heat source to substrate was 5 cm. The substrate temperature was maintained at $30 ^{\circ}C$ during deposition. The working pressure was about $2.0\times10^{-5}$Torr and the temperature of heat source was increased at the rate of 6 to $8^{\circ}C$/min. At $270^{\circ}C$, the shutter was opened and the deposition of PVDF has stared. As the electrical field intensity increased, $\alpha$ peaks such $530\textrm{cm}^{-1},795\textrm{cm}^{-1},1182\textrm{cm}^{-1}$ decreased, and $\beta$ peaks such as $510\textrm{cm}^{-1},1273\textrm{cm}^{-1}$ increased. The intensity of $530\textrm{cm}^{-1}$ peak was stronger than that of $510\textrm{cm}^{-1}$ peak velow the 71.4 kV/cm, intensity of electrical field. This result showed the characteristic of film mainly due to $\alpha$-mode. According to these results, the molecular structure of PVDF thin film is transformed from $\alpha$-mode with TGT or TG'T to $\beta$-mode with planar zigzag structure TT, as increasing of intensity of electrical field.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.4 s.37
• /
• pp.275-280
• /
• 2005

We propose a new approach to greatly simplify the fabrication of conventional nanoimprint lithography (NIL) by combined nanoimprint and photolithography (CNP). We introduce a hybrid mask mold (HMM) made from UV transparent material with a UV-blocking Cr metal layer placed on top of the mold protrusions. We used a negative tone photo resist (PR) with higher selectivity to substrate the CNP process instead of the UV curable monomer and thermal plastic polymer that has been commonly used in NIL. Self-assembled monolayer (SAM) on HMM plays a reliable role for pattern transfer when the HMM is separated from the transfer layer. Hydrophilic $SiO_2$ thin film was deposited on all parts of the HMM, which improved the formation of SAM. This $SiO_2$ film made a sub-10nm formation without any pattern damage. In the CNP technique with HMM, the 'residual layer' of the PR was chemically removed by the conventional developing process. Thus, it was possible to simplify the process by eliminating the dry etching process, which was essential in the conventional NIL method.

• Current Research on Agriculture and Life Sciences
• /
• v.19
• /
• pp.23-29
• /
• 2001

This study was carried out to develop a seedling raising method without nursery soils in automatic raising facility of rice seedlings for machine transplanting. Pre-germinated seeds were sowed on the seed trays with three different seats such as paper seat, corrugated board, and polyethylene film instead of nursery soils. The growth characteristics of the seedlings for 20 days after sowing were compared with that of a conventional standard raising method with nursery soils. There was no difference in plant height of 10-day old seedlings among the different nursery methods, but the plant height of seedlings grown for 15 days after sowing in the trays with fivefold newspaper and nursery soils was significantly taller than those on other nursery conditions. Dry weight of seedlings grown in the tray with fivefold newspaper bottom was heavier than those in nursery trays with a corrugated board and a piece of polyethylene film. The seedlings grown in a nursery tray with fivefold newspaper showed better seedling quality and root-mat formation compared with the other nursery trays. This result suggests that the healthy seedlings for machine transplanting can be raised in the paper-sheet tray without nursery soils. The labour hours and cost required for the soil-free method using paper was reduced by about 49.3% and 26.6%, respectively, compared with the semi-adult seedling on nursery soils.

• Korean Journal of Food Science and Technology
• /
• v.13 no.2
• /
• pp.165-169
• /
• 1981

In order to obtain the basic data for processing adaptability of Korean figs, chemical analysis was carried out with 7 cultivar produced at Namhae and 3 cultivar transplanted from abroad. To prolong the storage period, Masan No.1 was packed with PE films with different thickness and stored at $2{\pm}0.5^{wcirc}C$. The results obtained were as follows; 1. Total sugar content, total acidity and pectin were $37{\sim}89.6%$(dry basis), $0.57{\sim}1.08%$, $4.30{\sim}7.79%$, respectively. 2. Changes in moisture content of control during storage were rapid. After 16 days it was decreased about 5% but in the lot packed with PE films. moisture content was slowly decreased. 3. Total sugar and acidity of the figs in the lot packed with 0.08 mm PE film were very slowly decreased but control was not. 4. Changes in hardness, fracturability during storage showed similar decreasing pattern but adhesiveness was increased.

• Korean Journal of Microbiology
• /
• v.36 no.2
• /
• pp.130-135
• /
• 2000

Decomposition rate of organic matiter in the mud flat of Sunchon Bay was estimated. Physicochemical parameters, cellulose degradation rate. distribution of heterotrophic bacteria, and extracellular enzymatic activities were measured from August 1997 to July 1998. Soil temperatures, water contents, concentration of $PO_4$-P and organic matter were -1-~$30^{\circ}C$, 42.1-53.1%, 0.0779-0.1961 mgig and 1.99-7.64%, respectively. Decomposition rate of cellulose film ranged from 7.7 to 100%imonth, high in summer and low in winter. The number of heterotrophic bacteria ranged from $0.87{\times}10^6 to 3.6{\times}10^7 $CUFsIg dq soil. Enzymatic activities of phosphatase, $\alpha$-D-gluEosidase, $\beta$-D-glucosidase and cellobiohydrolase, which were measured as decomposition rate of methylumbelliferyl(MLiF)-substrate, were 152.23-1779.80 nMIhr, 2.67-202.18 nM/hr, 5.03-258.26 M h r and 3.42-63.07 nM/hr, respectively Cellulose degradaaon rate and extracellular extracellular enzymatic activities were conelated with each other, and showed high correlation coefticiency with soil temperature.