• 한국식품조리과학회지
• /
• 제31권3호
• /
• pp.248-254
• /
• 2015

We conducted this study to investigate the amount of RS and cooking characteristics of the commercial extrusion-cooked noodles. Ten kinds of noodles were selected and grouped according to the storage conditions; dry noodles (3), refrigerated noodles (2), freeze noodles (4), and dry noodle made from wheat flour as a control (not extrusion-cooked). The total starch of commercial noodles ranged from 62.50% to 84.13%, Refrigerated Naengmyeon and dry Dangmyun had high proportions of total starch (respectively 84.13% and 80.13%, respectively). The amounts of apparent amylose ranged from 25.01% to 42.93% and RS ranged from 0.61% to 5.99%. A high proportion of the total starch was rendered digestible by extrusion cooking, and a small amount of RS remained in the samples. Dry Dangmyun had the highest percentages of RS (5.99%), followed by refrigerated Naengmyeon C (2.41%) and dry Jjolmyeon (1.94%), and those of the other noodles were lower than that of the control (1.86%). Cooking properties and texture measurements were evaluated. Cooking loss and turbidity of cooking water were highest in dry Jjolmyeon and dry Naengmyeon. There was little cooking loss in dry Dangmyun and freeze rice noodles. In particular, dry Dangmyun and refrigerated Naengmyeon C containing high amounts of RS and amylose had relatively high measurements of hardness and tensile strength.

• 한국식품과학회지
• /
• 제22권6호
• /
• pp.651-658
• /
• 1990

옥수수전분에 인산화반응 시약으로 Sodium tripolyphosphate(STPP)를 반응시켜 건식법, 호화법 및 Extrusion 공법에 의하여 인산전분을 제조하고 그 이화학적 성질을 비교하였다. 건식법에 의한 인산전분(DSP) 제조시 반응온도는 인산염 치환도에 가장 큰 영향을 미치는 인자로 작용하였다. 호화법에 의해 인산전분(GSP)을 제조하였을 경우는 건식법보다 치환도가 증가하였으나 반응온도가 $85^{\circ}C$ 이상에서는 큰 변화가 없었다. Extrusion공정에 의한 인산전분(WESP) 제조는 원료수분 20, 25, 30%에서 치환도 $0.0066{\sim}0.0083$의 값을 보였다. DSP 시료의 호화온도는 치환도가 증가할 수록 낮아졌고 투명도가 증가되었으나 WESP 시료는 원료전분보다 높은 호화온도를 보였다. 인산전분 extrudate의 겉보기 점도는 DSP 시료보다 낮은 점도값을 보였다. 모든 인산전분 시료가 원료전분에 비해 높은 노화안정성을 보였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.441-444
• /
• 2006

Extrusion molding concrete panel is cured two times, that is the steam curing at atmospheric pressure and a high-pressure steam curing(autoclaving). Steam curing at atmospheric pressure is done before autoclaving and to acquire the proper strength for treat in process. Though this curing is the important factor on the quality of product and the speed in manufacturing process, it was not evaluated properly so far. Because of ignorance about curing, some engineers even think that the dry curing is better than the steam curing. This study is to investigate the properties of specimen according to variation of curing conditions in the coring chamber such as laboratory scale, pilot plant, and commercial plant. As estimating, in case of steam curing at atmospheric pressure to make extrusion molding concrete panel, moisture curing is better than dry curing and the desirable maximum temperature in curing chamber is about $50^{\circ}C$.

• Animal Bioscience
• /
• 제37권6호
• /
• pp.1085-1095
• /
• 2024

Objective: The main objective of this study was to determine available energy and nutritional digestibility of extruded cereals and the effect of extrusion on the nutritional value of feed ingredients, aiming to provide scientific basis for efficient application of extrusion in the diets of growing pigs. Methods: In Exp. 1, 48 crossbred growing pigs (Duroc×Landrace×Yorkshire) with an initial body weight (BW) of 34.6±2.2 kg were selected and fed with eight diets (non-extrusion or extrusion) to determine the digestible energy (DE), metabolizable energy (ME), and nutrients digestibility. Eight diets included extruded grains (barley, wheat, sorghum, or broken rice), while four had unprocessed grains. In Exp. 2, 9 diets were formulated including 4 cereals with extrusion or non-extrusion and a N-free diet. In addition, 9 growing pigs (BW = 22.3±2.8 kg) were fitted with T-cannula in the distal ileum and arranged in a 9×6 Youden square design. Results: Results show that apparent total tract digestibility of gross energy, dry matter, organic meal, ether extract, neutral and acid detergent fiber was not affected by the extrusion process and there was no interaction between cereal type and extrusion treatment on DE, ME. However, the apparent total tract digestibility for crude protein (CP) increased markedly (p<0.05). The standardized ileal digestibility (SID) of all amino acids (AA) except for leucine remarkably increased by extrusion (p<0.05). There was an interaction on the SID of arginine, leucine, isoleucine, methionine, phenylalanine, cystine, and tyrosine in growing pigs between type of grain and extrusion treatment (p<0.05). Conclusion: Extrusion increased the ileal digestibility of CP and most AA in cereals, however, the DE and ME of cereals were not affected in growing pigs.

• 한국식품과학회지
• /
• 제26권1호
• /
• pp.98-101
• /
• 1994

가수율을 변화시켜 취반한 밥의 관능검사, extrusion test, 수분함량측정 등의 실험을 통해 질지도 되지도 않은 보통의 밥상태를 만들기 위해 필요한 취반 가수율을 결정할 수 있었다. 밥의 압출력은 밥의 경도에 대한 관능 검사치와 정의 상관, 수분함량과는 부의 상관을 보였다. 관능 검사에서 질거나 되지 않은 보통밥상태로 평가된 밥의 수분함량은 62.3%, 압출력은 59.7kg이었으며, 이때의 가수율은 1.46배였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.49-52
• /
• 2006

Extrusion concrete panel is made by extrusion of high viscosity paste. The high viscosity paste is made by mix of cement, silica, reinforced fiber and thickening agent in the dry mixer and wet mixer subsequently, extrusion in the extruder, and curing in the normal steam curer and high pressure steam curer subsequently. To increase a flexural strength of the panel, it is used inorganic fiber as like asbestos. But it was known that the asbestos was harmful to human being lately, in the domestic area it is restricted usage in the construction materials. So, it is demanded the alternative material for asbestos in the extrusion concrete panel. This study is to investigate that the sepiolite is possible to be the alternative of asbestos. The 3 types of sepiolite is applied to the extrusion concrete panel. To investigate the properties of the panel with sepiolite, it is compared the control with asbestos in the flexural strength, the specific density and the spot compressive strength. From the test results, it was found that the panel with sepiolite B is higher than the control with asbestos in the flexural strength and in the density.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.354-357
• /
• 2009

The effect of texture of an extruded OFHC Cu rod on its sliding wear has been explored. Disk specimens with three different orientations were machined from the Cu rod for the wear test; surfaces of the disk were perpendicular ($0^{\circ}$), inclined with a specific angle ($45^{\circ}$), and parallel ($90^{\circ}$) to the extrusion axis of the rod. The texture was analyzed using an X-ray goniometer by measuring {111}, {200}, and {220} pole figures of each specimen. The analyzed texture was correlated with wear-test results of the Cu specimen. Dry sliding wear tests were performed at room temperature using a pin-on-disk wear tester against an Al2O3 ball. Applied load, sliding distance, sliding speed were fixed as 20 N, 200 m, and 0.5 m/sec, respectively. The $45^{\circ}$-inclined (to the extrusion axis) disk specimen showed the lowest wear resistance with the least data scatters. It has been found that distribution of cube texture strongly influences wear rate of the extruded Cu rod.

• Asian-Australasian Journal of Animal Sciences
• /
• 제5권3호
• /
• pp.571-582
• /
• 1992

Soybeans were dry extruded at three different temperatures (125, 135 and $145^{\circ}C$) for 30 s. Four lambs fitted with cannulae in the rumen and abomasums were used in a balanced $4{\times}4$ Latin square design. Lambs were fed at 2 h intervals for 12 times a day with automatic feeder to maintain steady state conditions in digestive tract. A dual-phase marker system was used to estivate ruminal flow rate of both liquid and solid digesta. Objectives of this study were to determine the effect of extrusion temperature of raw soybean on the ruminal liquid and solid dilution rate, nitrogen digestion and flow at the abomasum and availability of amino acid in lambs. There were no significant effects of extrusion on liquid and solid dilution rate, and liquid volume. Ruminal liquid flow rate was not influenced by extrusion and ranged from 389 to 435 ml/hr. Extrusion had no influence on ruminal OM digestion and flow rate to the abomasums. Dietary N flow to the abomasums increased (p < 0.05) as extruding temperature increased. Extruding temperature had a significant effect (p < 0.05) on flow of N escaping ruminal degradation and ranged from 34.91 to 57.38%. Microbial N synthesized/kg OMTDR ranged from 27 to 37 g and highest with $145^{\circ}C$ ESB diet. Extrusion decreased the amount of degradable amino acid in the rumen and increased the supply of amino acid to the lower gut, especially with 135 and $145^{\circ}C$ ESB diets.

• Asian-Australasian Journal of Animal Sciences
• /
• 제12권5호
• /
• pp.783-787
• /
• 1999

To study the effects of different extrusion conditions of barley on growth performance, nutrient digestibility and nutrient excretion in feces, a total of 150 growing pigs ($Landrace{\times}Duroc{\times}Large$ White; average 24.4 kg body weight) were allotted to five treatments, in a completely randomized block design. The experimental diets were based on corn-soybean and 30% of barley was included in each diet; barley was the only extruded ingredient. The treatments were 1) no extrusion (Control); 2) extrusion at $100^{\circ}C$ without preconditioning (ENLT); 3) extrusion at $150^{\circ}C$ without preconditioning (ENHT); 4) extrusion at $100^{\circ}C$ with preconditioning (ECLT); 5) extrusion at $150^{\circ}C$ with preconditioning (ECHT). Temperature in the barrel was controlled within ${\pm}5^{\circ}C$ by feed rate with the addition of water at the rate of $3{\ell}\;per\;min$. in the extruder for each treatment. For the 6 week experimental period, extrusion of barley improved the average daily gain (ADG) and digestibilities of dry matter, crude protein and gross energy in growing pigs. As compared to control, significant improvements in ADG (p<0.05) were shown in the groups of feeding extruded barley at high temperature (ENHT and ECHT). There were also significant differences in the digestibilities of DM, CP and P between extrusion temperatures. Barley extruded at high temperature gave better digestibilities of DM, CP and GE than barley extruded at low temperature. Extruded barley diet groups showed significantly (p<0.05) lower excretions of DM, nitrogen (N) and P per kg gain as compared to the ground barley group. DM, N and P excretion per kg gain were also significantly lower in pigs fed barley extruded at $150^{\circ}C$ than at $100^{\circ}C$. In conclusion, extrusion considerably improved the nutritive value of barley and it appeared that temperature is the most important variable.

• 한국가금학회지
• /
• 제17권4호
• /
• pp.284-295
• /
• 1990

Extrusion을 달리한 밀기울과 무기태린의 첨가수준의 주요 영양소의 소화율에 미치는 영향을 살펴보고자 증체양, 사료섭취량, 사료효율, 영양소별 소화율, 그리고 tibia의 성분량 변화에 대하여 조사하였다. 1) 증체양은 무기태린의 첨가수준이 0.225％, 0.45％일 경우 Extrusion처리구보다 Non－Extrusion처리구에서 높은 경향을 보였으나, 처리간에 유의성은 찾아 볼 수 없었다. 한편 Extrusion처리에 관계없이 무기태린의 첨가로 증체량이 개선되었으며 인을 첨가한 두처리구(0.225％와 0.45％) 사이에서는 유의성을 인정할 수 없었다. 2) 사요섭취양은 무기태린의 첨가구와 무기태린에서 Non－Extrusion처리구보다 Extrusion처리구에서 높은 경향을 찾아볼 수 있었다. 3) 사료효율은 무기태린을 첨가함으로써 개선되었으나, 인을 첨가한 두 처리구(0.225％와 0.45％) 사이에서는 유의성을 인정할 수 없었다. 4) 건물 소화율은 무기태린의 첨가수준이 높을수록 개선되었으나, Extrusion핵과는 인정할 수 없었다. 5) 인을 첨가한 두 처리구(0.225％와 0.45％) 사이에서 단백질 소화율은 Non－Extrusion 보다 Extrusion처리구가 높았으나, 증체에 직접적인 영향은 없었다. 6) Tibia의 Ca과 P의 함양은 무기태린의 첨가수준에 따라 증가하는 경향을 보였으나, 이러한 증가양상에서 P의 첨가수준과의 직접적인 관계는 찾아볼 수는 없었다.