• 제목/요약/키워드: Dry Air Density

검색결과 92건 처리시간 0.023초

한국과 중국의 도시별 위성기반 CO/CO2, CO/NO2 비율 특성 (Characteristics of Satellite-Based CO/CO2, CO/NO2 Ratio in South Korea and China)

  • 유지은;김재민;장진아;유정아;김승연;이윤곤
    • 대한원격탐사학회지
    • /
    • 제39권2호
    • /
    • pp.129-142
    • /
    • 2023
  • 본 연구는 2018년 4월부터 2022년 4월까지 Orbiting Carbon Observatory-2/3의 건조공기 이산화탄소 몰분율(column-averaged carbon dioxide dry-air mole fraction, XCO2) 자료와 TROPOspheric monitoring instrument의 일산화탄소(carbon monoxide, CO) 및 이산화질소(nitrogen dioxide, NO2) 연직컬럼농도(본 연구에서 XCO, XNO2로 명명) 자료를 활용하여 한국과 중국의 도시 및 권역에 대해 CO와 CO2, CO와 NO2의 비율을 분석하고, 사회경제적 지표(인구, 차량 등록 대수, 지역내총생산)와 비율의 관계, 한국과 중국에서의 특성 차이를 제시하였다. 먼저 CO2, CO 그리고 NO2 세 기체상 물질의 대기 중 체류시간 차이로 CO2, CO는 배경값과 추세선을 제거한 ΔXCO2, ΔXCO로 분석하였다. 지역별로 세 값을 비교한 결과 ΔXCO, ΔXCO2는 중국 지역이 XNO2는 한국 지역이 상대적으로 높은 값을 보였으며, 두 값의 비율(ΔXCO/ΔXCO2, ΔXCO/XNO2) 모두 한국보다 중국에서 높은 것으로 나타났다. ΔXCO/ΔXCO2, ΔXCO/XNO2와 사회경제적 지표는 양의 상관관계를 보였으며, 이는 도시 규모가 크고 경제활동이 활발할수록 대기오염기체 및 온실기체의 농도가 높다는 점을 시사한다. 한국과 중국의 비율 특성 차이를 분석하기 위해 두 나라의 지역별로 분석한 ΔXCO와 ΔXCO2 관계는 한국은 음의 관계성을 중국은 양의 관계성을 나타냈다. ΔXCO와 XNO2의 상관성을 여름과 겨울에 대해 각각 살펴본 결과, 한국은 계절에 따른 ΔXCO 증감이 크지 않은 것에 비해 중국은 북동부 지역을 중심으로 계절에 따른 ΔXCO와 XNO2의 증감이 크게 나타나며 관계성의 차이를 보였다. 이는 온실기체와 대기오염기체의 비율을 분석할 때, 계절 변동성 및 국가별 배출 특성을 감안해야 함을 시사한다.

바텀애시 및 준설토 기반의 인공 경량골재를 활용한 구조용 콘크리트의 배합설계 절차 (Mix Design Procedure of Structural Concrete Using Artificial Lightweight Aggregates Produced from Bottom Ash and Dredged Soils)

  • 이경호;양근혁
    • 한국건축시공학회지
    • /
    • 제18권2호
    • /
    • pp.133-140
    • /
    • 2018
  • 이 연구의 목적은 바텀애시 및 준설토 기반의 인공 경량골재 콘크리트의 합리적 배합설계 절차를 제시하는 것이다. 25 배합의 실험결과를 바탕으로 경량골재 콘크리트의 목표성능(압축강도, 절건 밀도, 초기 슬럼프, 공기량)에 대하여 물-시멘트 비, 단위 시멘트양, 경량 잔골재 치환율을 결정하는 식을 제시하였다. 제안된 식과 절대용적 배합의 개념으로부터 각 구성요소들의 단위용적중량을 산정하였다. 제시된 배합설계 절차는 기존 결정에 효율적으로 이용될 수 있다.

세 가지 매체형 분쇄기를 이용한 분쇄공정에서 다양한 실험 조건에 대한 입자형상변화 (Particle Morphology via Change of Ground Particle for Various Experimental Conditions During a Grinding Process by Three Kinds of Media Mills)

  • 사꾸라기시오리;보르암갈란;이재현;최희규
    • 한국입자에어로졸학회지
    • /
    • 제11권1호
    • /
    • pp.9-19
    • /
    • 2015
  • This study investigated the effects of ball mill operation condition on the morphology of raw powders in the dry-type milling process using three types of ball mills traditional ball mill, stirred ball mill and planetary ball mill. Furthermore, since spherical powders offer the best combination of high hardness and high density, the optimum milling condition to produce sphere-shaped powders was studied. The applied rotation speed ranged from 200rpm (low rotation speed) to 700rpm (high rotation speed). The used ball size ranged from 1mm to 5mm. The metal powder morphology was studied using SEM, XRD and PSA. The aimed spherical powders could be obtained under the optimum experimental conditions: traditional ball mill(200rpm, 1mm ball), planetary ball mill (500rpm, 1mm ball) and also planetary ball mill (700rpm, 1 and 3 mm ball). The results show to the development of new material using spherical type copper powder/CNT composites for air-craft and automotive applications.

황벽나무의 물리·역학적 특성 (Physical and Mechanical Characteristics of Phellodendron amure Ruprecht)

  • 김현우;변희섭;김병로
    • Journal of the Korean Wood Science and Technology
    • /
    • 제45권5호
    • /
    • pp.519-524
    • /
    • 2017
  • 본 연구는 황벽나무의 물리, 역학적 성질의 특성과 부후성을 조사하였다. 기건밀도는 실내, 외 방치한 목재에서 각각 0.41, $0.43g/cm^3$로 나타났다. 전수축율 시 T/R비는 실내, 외에서 각각 1.40, 1.32로 나타났다. 흡습성은 온도 $40^{\circ}C$ 상대습도 90% 경우 실내, 외에서 각각 16.30, 15.80%로 나타났다. 압축강도는 실내, 외에서 각각 43.81, 40.33 MPa 휨강도는 84.63, 68.80 MPa, 충격강도는 3.43, $4.00J/cm^2$, 경도는 횡단면에서 각각 47.92, 49.20 MPa로 나타났다. 경도는 횡단면에서 각각 47.92, 49.20 MPa로 나타났다. 1년간 실내에 방치한 목재와 실외에 방치한 목재는 부후에 강하고, 또한 T/R비도 낮은 편으로 치수가 안정한 나무로 판단된다.

Study on the response surface optimization of online upgrading of bio-oil with MCM-41 and catalyst durability analysis

  • Liu, Sha;Cai, Yi-xi;Fan, Yong-sheng;Li, Xiao-hua;Wang, Jia-jun
    • Environmental Engineering Research
    • /
    • 제22권1호
    • /
    • pp.19-30
    • /
    • 2017
  • Direct catalysis of vapors from vacuum pyrolysis of biomass was performed on MCM-41 to investigate the effects of operating parameters including catalyzing temperature, catalyzing bed height and system pressure on the organic yields. Optimization of organic phase yield was further conducted by employing response surface methodology. The statistical analysis showed that operating parameters have significant effects on the organic phase yield. The organic phase yield first increases and then decreases as catalyzing temperature and catalyzing bed height increase, and decreases as system pressure increases. The optimal conditions for the maximum organic phase yield were obtained at catalyzing temperature of $502.7^{\circ}C$, catalyzing bed height of 2.74 cm and system pressure of 6.83 kPa, the organic phase yield amounts to 15.84% which is quite close to the predicted value 16.19%. The H/C, O/C molar ratios (dry basis), density, pH value, kinematic viscosity and high heat value of the organic phase obtained at optimal conditions were 1.287, 0.174, $0.98g/cm^3$, 5.12, $5.87mm^2/s$ and 33.08 MJ/kg, respectively. Organic product compositions were examined using gas chromatography/mass spectrometry and the analysis showed that the content of oxygenated aromatics in organic phase had decreased and hydrocarbons had increased, and the hydrocarbons in organic phase were mainly aliphatic hydrocarbons. Besides, thermo-gravimetric analysis of the MCM-41 zeolite was conducted within air atmosphere and the results showed that when the catalyst continuously works over 100 min, the index of physicochemical properties of bio-oil decreases gradually from 1.15 to 0.45, suggesting that the refined bio-oil significantly deteriorates. Meanwhile, the coke deposition of catalyst increases from 4.97% to 14.81%, which suggests that the catalytic activity significantly decreases till the catalyst completely looses its activity.

BIOFILTRATION OF GASEOUS TOLUENE USING ADSORBENT CONTAINING POLYURETHANE FOAM MEDIA

  • Amarsanaa, Altangerel;Shin, Won-Sik;Choi, Jeong-Hak;Choi, Sang-June
    • Environmental Engineering Research
    • /
    • 제11권1호
    • /
    • pp.1-13
    • /
    • 2006
  • In this study, conventional biofilters packed with flexible synthetic polyurethane (PU) foam carriers were operated to remove toluene from a contaminated air stream. PU foams containing various adsorbents (e.g., zeolite, sepiolite, dolomite and barite) were synthesized for the biofilter media and their adsorption characteristics of toluene were determined. Adsorption capacity of PU-adsorbent foam was in the order of PU-dolomite ${\approx}$ PU-zeolite > PU-sepiolite > PU-barite. During the biofiltration experiment, influent toluene concentration was in the range of 0-160 ppm and EBRT (i.e., empty bed residence time) was 45 seconds. Pressure drop of the biofilter bed was 4-5 mm $H_2O/m$ column height. The maximum removal capacity was in the order of PU-dolomite > PU-zeolite > PU-sepiolite > PU-barite, while the complete removal capacity was in the order of PU-dolomite > PU-sepiolite > PU-zeolite > PU-barite. The better biofiltration performance in PU-dolomite foam was because PU-dolomite foam had lower density and higher porosity than the others providing favorable conditions for microbial growth. The results of biodegradation kinetic analysis showed that PU-dolomite foam had higher maximum removal rate ($V_m\;=\;11.04\;g$ toluene/kg dry material/day) and saturation constant ($K_s\;=\;26.57\;ppm$) than the other PU foams. This supports that PU-dolomite foam was better than the others for biofilteration of toluene.

노출환경 조건이 자기치유형 보수 모르타르 시험체의 균열 치유성능에 미치는 영향 (Influence of Exposure Environmental Conditions on the Crack Healing Performance of Self-healing Repair Mortar Specimens)

  • 이웅종;이현호;안상욱;이광명
    • 한국건설순환자원학회논문집
    • /
    • 제6권4호
    • /
    • pp.283-288
    • /
    • 2018
  • 균열 자기치유 소재는 균열발생 시점부터 노출환경 조건에 따라 활성화되기 때문에 치유성능과 균열면의 노출환경 조건과의 관계 규명이 매우 중요하다. 이에 본 연구에서는 자기치유형 보수 모르타르의 치유성능에 노출환경 조건이 미치는 영향을 투수시험을 통하여 조사하였다. 균열시험체의 초기 균열폭에 대한 온도 및 습도의 영향을 조사한 결과, 양생온도의 영향은 미미하였으나, 건습변화에 의해서는 균열닫힘 현상이 발생하고 있음을 확인하였다. 그리고 자기치유형 보수 모르타르 시험체의 균열부위에서 생성된 치유물질은 calcite 광물로 확인되었다. 밀도가 높은 calcite 광물은 중력의 영향을 받아 침강하기 때문에, 균열면의 방향에 따라 치유성능에 다소 차이를 나타냈으며, 또한 대기노출 조건보다 습윤노출 조건에서 치유성능이 크게 향상되었다.

Screening Moringa species focused on development of locally available sustainable nutritional supplements

  • Kim, Ye-Jung;Kim, Hee Seon
    • Nutrition Research and Practice
    • /
    • 제13권6호
    • /
    • pp.529-534
    • /
    • 2019
  • BACKGROUND/OBJECTIVES: The leaves of Moringa oleifera (MO) and Moringa stenopetala (MS) commonly grown in Ethiopia possess potential nutritional and medicinal value. The aim of this study was to evaluate the nutritional and functional characteristics of the dried leaf powder from two Moringa species to develop sustainable nutritional supplements for Ethiopians from locally grown plant sources. MATERIALS/METHODS: Freshly harvested and air-dried MO and MS leaves were authenticated and the nutritional contents, such as protein, ash, lipids, and selected vitamins and minerals, were analyzed using standard analytical procedures. Amino acid compositions were also determined by an amino acid analyzer. Nine-week-old mice were randomly divided into four groups to investigate the anti-obesity effects of Moringa. The first group was fed a basal diet, the second group a high-fat diet, and the others were fed a high-fat diet containing 0.1% Moringa leaf powder from each species. After seven weeks, serum indices related to lipid profiles from each mouse were analyzed. RESULTS: The present study revealed high protein (28-29%) and ash (7-11%) contents. Glutamic acid, aspartic acid, proline, and leucine were the most abundantly found amino acids in both species. The predominant minerals in the leaf powder were calcium (826-1,530 mg/100 g), potassium (794-904 mg/100 g), and magnesium (286-431 mg/100 g). Pyridoxine (475.06 mg/100 g) and vitamin E (34.2 mg/100 g) were found only in MS. Niacin was found only in MO at 32.21 mg/100 g, whereas ascorbic acid was found in both species (3.89 and 6.19 mg/100 g dry weight for MO and MS, respectively). The results of the animal study showed that mice on a high-fat diet containing 0.1% MO leaf powder alleviated the elevation of cholesterol, triglycerides, and low-density lipoprotein cholesterol induced by the high fat diet. MO was more effective than MS in preventing hypercholesterolemia and fat deposition. CONCLUSION: The findings in this work confirmed that Moringa leaves of both MO and MS possessed high nutritional value but MO was better at preventing the harmful effects of the high-fat diet than MS.

재사용 암면, 마사토 및 원예용 상토의 혼합비율에 따른 딸기 자묘의 생육 특성 (Growth Characteristics of Strawberry Runner Plants according to Mixing Ratio of Reused Rockwool, Decomposed Granite, and Horticultural Media)

  • 정지희;배효준;고바울;구양규;김호철;배종향
    • 생물환경조절학회지
    • /
    • 제31권4호
    • /
    • pp.497-503
    • /
    • 2022
  • 본 연구는 원예용 상토:마사토:재사용 암면을 100:0:0(대조구), 80:0:20(M1), 60:30:10(M2), 40:30:30(M3), 30:40:30(M4) 및 0:50:50(M5)의 비율(v:v:v)로 혼합한 후 상토의 물리·화학성과 '설향' 딸기 자묘의 생육에 미치는 영향을 알아보기 위하여 수행하였다. 상토의 물리적 측면에서는 통계적 차이가 인정되었으며 용적밀도 및 입자밀도는 원예용 상토가 대부분인 대조구와 M1에서 낮았으나, 재활용 암면과 마사토의 혼합비율이 높았던M3, M4, M5에서 용적밀도와 입자밀도가 높았다. 유효수분과 완충수분에서도 비슷한 경향을 보였다. 반면 공극률과 기상률은 대조구와 M1에서 높았고 M3, M4, M5에서 낮았다. 치환성 양이온(K, Ca, Na, Mg)과 염기치환용량(CEC)은 대조구와 M1에서 높았으며 M1, M3, M4, M5에서 낮았다. '설향' 자묘를 재배한 결과, 초장은 M2에서 32.1cm로 길었고 M4에서 28.4cm로 작았으나 자묘의 생육지표인 크라운 직경으로 판단한다면 모든 배지에서 11.23-12.03mm로 형성되어 자묘의 생육에 적합하다고 생각된다. 지상부, 지하부의 생체중과 건물중은 유의한 차이가 없었다. 생육 결과를 종합하였을 때, 일정 비율의 재사용 암면과 마사토를 혼합하여도 원예용 상토만을 사용한 것과 동일한 수준의 생육을 나타내었으나, 재활용 암면과 마사토를 적정 비율로 혼합하였을 때, 공극률, 기상률 등 물리성이 개선되어 관수관리에 유리할 것으로 판단된다.

아까시나무 황화현상 발생임분의 토양 이화학적 특성 (Soil Physiochemical Properties in Leaf-yellowing Black Locust (Robinia Pseudo-acacia L.) Stands)

  • 이승우;변재경;지동훈;권영대
    • 한국토양비료학회지
    • /
    • 제42권6호
    • /
    • pp.409-414
    • /
    • 2009
  • 아까시나무는 척박지에서 적응력이 뛰어나 과거 산림녹화와 사방조림 등에 많이 이용된 수종이다. 그러나 2000년 이후 황화현상이 국지적으로 빈번히 발생해 오다가 2006년에는 전국적으로 확산된 바 있다. 따라서 본 연구는 경기도 오산시 3개 지역에서 아까시나무의 황화현상 피해지와 미피해지 내에서 산림토양의 물리화학적 특성을 조사, 분석하여 그 관계성을 파악하고자 수행되었다. 조사지 일대 토양은 사방지토양, 갈색건조산림토양 및 갈색약건산림토양이 주를 이루었다. 피해지의 유효토심(16cm)과 전토심(25cm)은 미피해지(30cm, 56cm)에 비해 현저히 낮게 나타났다. 또한 미피해지에 비해 피해지 토양에서 고상률은 높은 반면 기상률은 낮고, 가비중도 높은 결과를 보여 근계부내 공기와 수분 이동성의 상대적 저하를 반영하였다. 또한 전체 조사지가 산성도가 매우 높은 강산성 토양이지만 피해지의 토양산도는 평균 pH 4.42로 미피해지의 pH 4.54보다 다소 낮았으며, 토양 내 유효인산, 칼슘, 마그네슘 함량과 염기포화율의 결과 역시 피해지에서 낮게 나타났다. 이러한 미피해지에 비해 열악한 황화현상 피해지의 토양 물리화학적 성질은 양분과 수분에 대한 보유 및 공급능력의 상대적 저하로 아까시나무 임분이 다른 환경 스트레스에 보다 민감하게 반응할 수 있음을 반영한다.