• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XII)
• /
• pp.428-432
• /
• 2003

이 연구는 전기화학적 배양법과 호기성 조건을 유지함으로써 Thiobacillus ferrooxidans의 밀도가 높게 유지될 수 있다는 것을 보여준다. 최적 pH는 $2.0{\pm}0.05$로 결정하고 1vvm의 Air를 공급하였다 전류와 전압은 0.15A, 4V로 유지하였고 Pt 전극에서 85%의 효율로 $Fe^{3+}$ 를 $Fe^{2+}$로 환원시켰다. 이러한 조건에의 배양에서 초기 건조셀 밀도 0.0025 g-dry cell/L에서 8일 후에는 0.0576 g-dry cell/L에 이르렀다. 이는 같은 조건에서 고전적인 배양법에 의한 것보다 7배가 높은 값이다.

• 설비공학논문집
• /
• 제12권6호
• /
• pp.599-608
• /
• 2000

One dimensional numerical modeling was carried out for the melting behavior of dry snow and the unsaturated flow when heat was supplied from the bottom surface. Discrepancy between the previous experimental data and the present numerical results is substantially reduced by considering the density change of water permeation layer due to the infiltration of meltwater. In the parametric study for effective thermal conductivity, it was found that the effect of this parameter to the behavior of snow melting is minor. Sensitivity analysis showed that the melting time is most sensitive to changes in supplied heat flux, snow temperature, and bulk density, whereas snow bulk density and residual saturation have a significant effect on the height of water permeation layer in snow.

• 한국관개배수논문집
• /
• 제5권1호
• /
• pp.63-74
• /
• 1998

This study was performed to evaluate the hydraulic conductivity of sand-bentonite mixtures according to 8 kinds of the bentonite content using the reassembled air-entry permeameter. Results obtained are as follows: 1. The maximum dry density and optimum m

• 설비공학논문집
• /
• 제20권9호
• /
• pp.614-623
• /
• 2008

This paper presents the results of a laboratory study on the thermal conductivity of and(silica, quartzite, limestone, sandstone, granite and two masonry sands)-water mixtures used for ground heat exchanger backfilling materials. Nearly 260 tests were performed in a thermal conductivity measuring system to characterize the relationships between the thermal conductivity of mixtures and the water content. The experimental results show hat the thermal conductivity of mixtures increases with increasing dry density and with increasing water content. The most widely used empirical prediction models for thermal conductivity of soils were found inappropriate to estimate the thermal conductivity of unsaturated sand-water mixtures. An improved model using an exponential relationship to compute the thermal conductivity of dry sands and empirical relationship to assess the normalized thermal conductivity of unsaturated sand-water mixtures is presented.

• 한국지반공학회논문집
• /
• 제18권6호
• /
• pp.129-139
• /
• 2002

최근 지반 특성과 지반 오염도의 조사를 위해 유전상수 측정기법을 적용하기 위한 연구가 활발히 진행되고 있다. 본 연구에서는 다양한 함수비와 건조단위중량을 갖는 화강풍화토와 주문진표준사의 유전상수를 75kHz～12MHz의 주파수 범위에서 측정하였다. 사질토의 유전상수는 주파수가 증가함에 따라 감소하는 분산거동을 보였다. 또한 함수 비나 건조단위중량이 증가함에 따라 배향분극에 기여하는 물분자의 양이 증가하고 유전상수가 1인 공기의 양이 감소하여 유전상수가 증가하였다. 흙의 유전특성은 함수비와 건조단위중량을 모두 고려한 수분밀도에 선형적으로 비례하는 경향을 나타내었다. Maxwell식, Topp식, CRIM식에 의한 계산값과 측정된 값을 비교한 결과 기존의 식은 유전상수의 분산거동을 고려하지 못하고 있기 때문에 저주파에서는 측정값과 차이를 나타내었다.

• 한국수소및신에너지학회논문집
• /
• 제20권2호
• /
• pp.125-132
• /
• 2009

Cylinder shaped air-breathing PEMFC has been developed to have small volume, low contact resistance and better air accessibility to the open cathode. This cylinder shaped design consists of an anode cylinder with helical flow channel and a cathode current collector with slits. The pressure distribution measurement according to the shapes was performed. The test result indicated that cylinder shaped fuel cell has better pressure distribution compared with the planar shaped fuel cell. The better pressure distribution was connected to the higher performance. The maximum power density of cylinder shaped fuel cell was about 20% higher than the planar shaped fuel cell. The maximum power density of the developed cylinder shaped air-breathing PEMFC with dry hydrogen was $220\;mW/cm^2$ and with humidified hydrogen was $293\;mW/cm^2$.

• 한국식품저장유통학회지
• /
• 제5권3호
• /
• pp.217-223
• /
• 1998

천일건조, 열풍건조, 동결건조한 건오미자의 품질과 저장온도별 성분변화 및 생오미자의 저장수명을 검토한 결과 다음과 같다. 건오미자의 pH와 산도는 건조방법에 따라 큰 차이가 없었으나 환원당은 열풍건조(11.02%)와 동결건조(10.12%)에 비해 천일건조(3.77%)에서 월등히 낮았고 조단백질함량은 동결건조ㆍ열풍건조ㆍ천일건조 순으로 나타났으며 흡광도(520nm)와 a값은 천일건조와 열풍건조에 비해 동결건조시(3.889) 2.4-2.7배와 3배가 각각 높았다. 건오미자 저장중 수분함량은 저장기간이 길어질 수록 증가하였으며 산도는 $25^{\circ}C$$^{\circ}C$ 저장에서 감소되었으나 저온 및 냉동저장에서는 변화가 적었다. 환원당은 저장온도에 관계없이 계속 증가하다 8개월 이후부터 감소하였고 흡광도와 색택(L, a, b값)은 $25^{\circ}C$$^{\circ}C$저장시 감소되었으나 저온 및 냉동저장에서는 증가하는 경향이었다. 생오미자의 4$^{\circ}C$ 저장시 9일부터 부패가 일어나 저장가능기간은 9일로 판단되며 냉동저장시 산도와 환원당은 저장기간이 길어질수록 감소하였고 흡광도는 저장 8개월 후에 가장 높은 수치를 나타냈으며 그 후 감소하였는데 -6$0^{\circ}C$ 저장구에는 초기 흡광도보다 높게 나타났다.

• Journal of the Korean Wood Science and Technology
• /
• 제40권2호
• /
• pp.101-109
• /
• 2012

Wood composites are a hygroscopic material and have ability to exchange its moisture content with air. This study investigated the formaldehyde emission and moisture content change of four wood composites (particleboard (PB), medium density fiberboard (MDF), high density fiberboard (HDF), laminated HDF (L-HDF)) as a function of bake-out temperature and time. The composites were baked out for 1, 3, 5, 7, 10, 14, 21, and 28 days at temperatures of $20{\pm}2$, $35{\pm}2$, and $50{\pm}2^{\circ}C$ in a dry oven. The moisture content change was used to determine the emission bake-out of the composites. Best bake-out time results were obtained with after 7 days all composites. Formaldehyde emission values of composites decreased with decreasing moisture content for both temperatures. The formaldehyde emission results of bake-out temperature 35 and $50^{\circ}C$ showed a similar tendency.

• 한국레이저가공학회지
• /
• 제6권2호
• /
• pp.27-33
• /
• 2003

A laser shock cleaning technology is a new dry cleaning methodology for the effective removal of small particles from the surface. This technique uses a plasma shock wave produced by a breakdown of air due to an intense laser pulse. In order to optimize the laser shock cleaning process, it needs to evaluate the cleaning performance quantitatively by using a monitoring technique. In this paper, an acoustic monitoring technique was attempted to investigate the laser shock cleaning process with an aim to optimize the cleaning process. A wide-band microphone with high sensitivity was utilized to detect acoustic signals during the cleaning process. It was found that the intensity of the shock wave was strongly dependent on the power density of laser beam and the gas species at the laser beam focus. As a power density was larger, the shock wave became stronger. It was also seen that the shock wave became stronger in the case of Ar gas compared with air and N$_2$ gas.

• 한국의류산업학회지
• /
• 제15권3호
• /
• pp.437-443
• /
• 2013

This paper investigates the physical properties of aramid and aramid/nylon hybrid air jet textured filaments for protective garments relative to ATY nozzle diameters. Three types of para-aramids(840d, 1,000d, 1,500d) and nylon(420d) filaments were prepared; in addition, 840d aramid/420d nylon and three kinds of aramid filaments were texturized with a variation of air jet nozzle diameters(0.6, 0.75, 1 and 1.2 mm) on the AIKI air jet texturing machine. The measured physical properties of 16 specimens are as follows. The linear densities of aramid and aramid/nylon hybrid ATY increased with a larger nozzle diameter. The tenacity and initial modulus of aramid and hybrid ATY linearly decreased with a larger nozzle diameter; in addition, the breaking strain increased with the nozzle diameter. The dry and wet thermal shrinkage of hybrid ATY increased with a larger nozzle diameter from 0.6 mm to 1 mm and then decreased at a nozzle diameter of 1.2 mm (which seems to be a critical diameter). The wet and dry thermal shrinkage of aramid/nylon hybrid ATY are influenced by the nylon part of the hybrid yarns because the wet and dry thermal shrinkages of aramid ATY are less than 0.2%. The instabilities of aramid and aramid/nylon hybrid ATY were not influenced by the air jet nozzle diameter; however, they increased with the linear density of ATY.