• Geomechanics and Engineering
• /
• v.27 no.6
• /
• pp.583-594
• /
• 2021

The gas permeability behavior of unsaturated bentonite-based materials is of major importance for ensuring effective sealing of high-level radwaste repositories. This study investigated this by taking a sample of Granular Bentonite Material (GBM) at the end of the Engineered Barrier Emplacement (EB) experiment in the Opalinus Clay, placing it under different humidity conditions until it achieved equilibration, and testing the change in the gas permeability under loading and unloading. Environmental humidity is shown to have a significant effect on the water content, saturation, porosity and dry density of GBM and to affect its gas permeability. Higher sensitivity to confining pressure is exhibited by samples equilibrated at higher relative humidity (RH). It should be noted that for the sample at RH=98%, when the confining pressure is raised from 1 MPa to 6 MPa, gas permeability can be reduced from 10^-16 m² to 10^-19 m², which is close to the requirements of gas tightness. Due to higher water content and easier compressibility, samples equilibrated under higher RH show greater irreversibility during the loading and unloading process. The effective gas permeability of highly saturated samples can be increased by 2-3 orders of magnitude after 105℃ drying. In addition, cracks possibly occurred during the dehydration and drying process will become the main channel for gas migration, which will greatly affect the sealing performance of GBM.

• International Journal of Highway Engineering
• /
• v.3 no.4 s.10
• /
• pp.117-126
• /
• 2001

In this research, evaluation of adhesion in tension property of SBR-modified concrete to ordinary portland cement concrete was conducted with uniaxial direct tensile bond test which was proposed by Kuhlmann. A test set-up was fabricated in order to minimize the eccentric force by introducing a joint which might fully rotate. The main experimental variables were cement-latex ratios, surface preparations and moisture levels. The results obtained were as follows: The LMC specimen at 15% latex-cement ratio increased the adhesion in tension by range of 37% compared to that of conventional cement concrete. This might be due to latex film formed between cement paste and aggregate. The effects of surface preparation on bond of latex modified concrete to conventional concrete were significant at the conditions by sand paper and wire brush. A better bond could be achieved by rough surface rather than smooth. The saturated and surface dry (SSD) condition were considered to be the most appropriate moisture level followed by wet, finally by dry. Thus, a proper surface preparation and moisture level are quite necessity in order to obtain better bonding at LMC overlay.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.8
• /
• pp.1390-1397
• /
• 2004

The optimal fermentation conditions for processing of the salt-fermented oysters in olive oil were examined. The penetration of salt into oyster meat was completed within 1 day after brine salting or dry salting. The amino nitrogen contents of salt-fermented oyster was increased slightly up to the 20th day during salt-fermentation at 5$\pm$1$^{\circ}C$. The hardness of the salt-fermented oysters was increased up to the 10th day, and then softened gradually by some parts of the tissue were hydrolyzed. The viable cell counts didn't change overall at the non-salt medium, but it was increased definitely up to the 15th day at the 2.5% salt medium during salt-fermentation. Based on the results of sensory tests, the salt-fermented oyster at 5$\pm$1$^{\circ}C$ for 15∼20 days showed the best flavorous condition. The optimal condition for the salt-fermented oyster in olive oil was to ripen at 5$\pm$1$^{\circ}C$ for 15 days by brine-salting in saturated saline solution-oyster sauce (2:1).

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.12 no.2
• /
• pp.66-72
• /
• 1983

In order to improve the quality of salted sea mustard, the conditions of blanching, salting, and storage were examined. The process in which sea mustard was blanched for 20 seconds in boiling seawater, soaked in saturated brine solution for 20 hours and then salted for 10 hours by the spreading 10~20% (w/w) of granulated dry salt to obtain the moisture content of about 60% or below, resulted a good color retention of chlorophyll and carotenoid pigments, and organoleptic quality. The shelf-life of the product estimated by 30-40% pigment retention was 50-60days when stored at $4^{\circ}C$ or below.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.57-57
• /
• 2022

In many areas of the world, salt damage and drought have had a negative impact on human survival due to a decrease in agricultural productivity. For instance, about 50% of agricultural land will be affected by salt damage by 2050. Biostimulants such as plant extracts can not only increase the nutrient utilization efficiency of plants, but also promote plant growth and increase resistance to abiotic or biotic stress. Therefore, the objective of this study was to determine how selected plant extracts might reduce levels of stress caused by drought and salt and to better understand the physiological response mechanisms of rice plants. In this study, we used Soybean leaves, Soybean stems and Allium tuberosum, Allium cepa, Hizikia fusiforme, and Gracilaria verrucosa extracts were used. These extracts had been used in previous studies and were found to be effective. The materials were dried in a dry oven at 50℃ for 5 days and ground using a blender. Each 50 g of materials was put in 1 L of distilled water, stirred for 24 hours, filtered using 4 layers of mirocloth, and then concentrated using a concentrator. Rice (cv. Hopumbyeo) seeds were immersed and germinated, and then sown in seedbeds filled with commercial soil. In drought experiments, three rice seedlings at 1 week after seeding was transplanted into 100 ml cups filled with commercial soils and grown until the 4-leaf stage. For this experiment, the soil weight in a cup was equalized, and water was allowed to become 100% saturated and then drained for 24 hours. Thereafter, plant extracts at 3% concentrations were applied to the soils. For NaCl treatments, rice plants at 17 days after seeding were treated with either 100 mM NaCl or plant extracts at 1%+ 100 mM NaCl combinations in the growth chamber. Leaf injury, relative water content, photosynthetic efficiency, and chlorophyll contents were measured at 3, 5, and 6 days after treatments. Shoot fresh weight of rice under drought conditions increased 28-37% in response to treatments of Soybean leaf, Soybean stem, Allium tuberosum, Allium cepa, Hizikia fusiforme, and Gracilaria verrucosa extracts at 3% when compared with control plants. Shoot fresh weight of rice subjected to 100 mM NaCl treatments also increased by 6-24% in response to Soybean leaf, Soybean stem, Allium tuberosum, Allium cepa, Hizikia fusiforme, and Gracilaria verrucosa extracts at 3% when compared with control plants. Compared to the control, rice plants treated with these six extracts and subjected to drought conditions had significantly higher relative water content, Fv/Fm, total chlorophyll and total carotenoids than control plants. With the exception of relative water contents, rice plants treated with the six extracts and subjected to salt stress (100 mM NaCl treatments) had significantly higher Fv/Fm, total chlorophyll and total carotenoids than control plants. However, the type of extract used did not produce significant difference in these parameters. Thus, all the plant extracts used in this study could mitigate drought and NaCl stresses and could also contribute substantially to sustainable crop production.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.26 no.3
• /
• pp.191-208
• /
• 2024

In this study, a hydro-mechanical-damage coupled analysis model was developed to evaluate the structural safety of radioactive waste disposal structures. The Mazars damage model, widely used to model the fracture behavior of brittle materials such as rocks or concrete, was coupled with conventional hydro-mechanical analysis and the developed model was verified via theoretical solutions from literature. To derive the numerical input values for damage-coupled analysis, uniaxial compressive strength and Brazilian tensile strength tests were performed on concrete samples made using the mix ratio of the disposal concrete silo cured under dry and saturated conditions. The input factors derived from the laboratory-scale experiments were applied to a two-dimensional finite element model of the concrete silos at the Wolseong Nuclear Environmental Management Center in Gyeongju and numerical analysis was conducted to analyze the effects of damage consideration, analysis technique, and waste loading conditions. The hydro-mechanical-damage coupled model developed in this study will be applied to the long-term behavior and stability analysis of deep geological repositories for high-level radioactive waste disposal.

• Food Science of Animal Resources
• /
• v.30 no.3
• /
• pp.435-442
• /
• 2010

The study analyzed the effects of salt concentration [high salt (HS) and low salt (LS)] and sodium nitrite ($NaNO_2$), which are typically utilized in Korean processing facilities, on fatty acid composition, free amino acids, microbial counts and sensory characteristics of processed dry-cured ham. Four different treatments were considered: three hams (11.30 kg) salted with 92 g/kg salt (w/w) (HS), three hams (10.65 kg) treated with HS and 100 ppm $NaNO_2$ (HS+$NaNO_2$), three hams (11.42 kg) salted with 62 g/kg salt (w/w) (LS), and three hams (10.62 kg) treated with LS and 100 ppm $NaNO_2$ (LS+$NaNO_2$). Fatty acid composition analysis revealed significantly (p<0.05) higher saturated fatty acid and lower (p<0.05) unsaturated fatty acid in the HS+$NaNO_2$ group compared with the other groups. Glutamate, alanine and lysine free amino acids were higher than the other free amino acids. The processing conditions did not significantly affect the free amino acids of biceps femoris muscles, except for the proline content (p>0.05). In sensory evaluation, the fermentation aroma of the LS group was higher than that of the HS group. The aerobic counts consistently ranged from from $2.3{\times}10^2$ to $1.11{\times}10^4$ CFU/g. Escherichia coli including strain O157:H7, Staphylococcus aureus, and Salmonella spp. were not detected.

• Journal of Nutrition and Health
• /
• v.10 no.2
• /
• pp.18-26
• /
• 1977

Among animals, the rabbit is known to be affected most sensitively by dietary changes and to be most susceptible to atherosclerosis. The exact reason is still unknown as to whether the primary cause is intrinsic (tissue itself) or extrinsic such as a blood factor which could be influenced by various dietary means. It is of utmost importance to check the nutritional quality of rabbit meat before it is accepted and adapted as a daily food item. To evaluate nutritional quality of rabbit meat, studies on various aspects of lipid components were carried out in comparison with other animal meats such as beef, pork and chicken also included in the study was the question whether the cooking and storage conditions influence the composition of fatty acids and cholesterol level. Some results and findings are listed below: 1. The content of linoleic acid (18 : 2), one of the essential fatty acids, was much higher in rabbit meat compared to the other meats. The Percentages of this Polyunsaturated fatty acids, was much higher in rabbit meat compared to the other meats. The percentages of this polyunsaturated fatty acid in terms of total fatty acids were $37.3{\pm}3.7$, 5.9, 14.5, and 21.9% for rabbit, beef, pork, and chicken respectively. The degree of unsaturation was high not only in meat but also in liver and adipose tissue of rabbit. The values of iodine number, the indication of degree of unsaturation, were known to be $102{\sim}107$, $32{\sim}47$, $46{\sim}67$, and $55{\sim}77$ for rabbit, beef, pork, and chicken respectively. Such a high proportion of this polyunsaturated fatty acid contained in rabbit meat could be harmful due to their Peroxidation effect. 2. A small amount of lower (short chain) fatty acids was isolated from rabbit tussues, which were not observed in other animal's tissues. The significance of this small amount of short chain fatty acids contained in rabbit meat remained an open question. 3. The concentration of total cholesterol in rabbit meat was similar to that of otherr but the content of esterified cholesterol was higher in rabbit meat. This was probably due to the perference of cholesterol to esterify with unsaturated fatty acids. By roasting the percentage of Polyunsaturated fatty acids was decreased while saturated palmitic acid was proportionally increased. 4 The composition of fatty acids were affected more by dry heat than moist heat. More research should be pursued to improve methods of preservation and storage to prevent possible peroxidation and rancidity problems of rabbit meat. In the meantime, the public should be informed to eat fresh rabbit meat and not to store it for a long period of time. This study was supported by the Ministry of Science and Technology in Korea.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.12
• /
• pp.1971-1978
• /
• 2009

This study investigated the adsorption of safflower yellow dye on wool protein fiber and the optimum dyeing conditions to test color reproducibility. In addition, the effects of mordants on dye adsorption, color, fastness, and photofading rate were also studied. The prepared dye in powder form was characterized with UV-vis spectroscopy and FT-IR spectrometric analysis. The color of dyed fabrics was characterized by CIE $L^*a^*b^*$ coordinates, H V/C, and K/S values. The color reproducibility of the dyed wool fabrics was examined. The amount of dye adsorption increased and also, the shade of the dyed wool fabrics became deeper and more saturated with increasing temperature, time, and dye concentration. The maximum color strength was obtained at pH 3.0. The shade of dyed wool fabrics ranged from light yellow to dark mustard yellow as the pH of the dye bath shifted from alkaline to acidic. Color reproducibility was reliable with color differences in the range of 0.53~1.75. Fastness to dry cleaning was relatively good at 4/5 rating irrespective of mordanting. Fe and Cu mordants showed the least color change of the dyed wool fabrics after exposure to light. Mordants did not contribute to improve dye uptake and color fastness, although they made variations in color tone. Safflower yellow dye can be used satisfactorily without mordants and will not cause damage to the environment.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.4
• /
• pp.419-434
• /
• 2020

In this study, the damage parameters of Mazars model for KURT (KAERI Underground Research Tunnel) granite are measured form uniaxial compressive and Brazilian tests under the simulated coupled condition of a deep geological disposal. The tests are conducted in three different temperatures (15℃, 45℃, and 75℃) and dry/saturated conditions. Major model parameters such as maximum effective tensile strain (𝜖_d0), A_t, B_t, A_c, and B_c differ from the typical reference values of concrete specimens. This is likely due to the difference in elastic modulus between rock and concrete. It is found that the saturation of specimens causes an increase in value of B_t and B_c while, the rise in temperature increases 𝜖_d0 and B_t and decreases B_c. The damage model obtained from this study will be used as the primary input parameters in the development of coupled Thermo-Hydro-Mechanical Damage numerical model in KAERI.