• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.6
• /
• pp.751-755
• /
• 2011

Electric Parking Brake(EPB) is the system operated by electric control actuator. It differs from the mechanical parking brake system which is operated by lever and pedal in need of human power. The EPB system is composed of DC motor, helical and differential epicyclic gear, screw, cables, and sensor. This paper describes about the EPB system mathematically and constructs a modeling of the EPB system using MATLAB/SIMULINK. Especially, SimMechanics library in SIMULINK is used to make each parts of system a module. By made modeling of the friction torque between bolt and nut. Cable tension can be maintained after the motor operating stops.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.130-130
• /
• 2000

타이타늄(CP Ti)과 타？늄합금은 인체의 골격을 구성하고 있는 물질과 가장 흡사한 물리적 성질과 우수한 생체적합성으로 인해 임플란트용 재료로 많이 사용되고 있으며, 최근에 인공관절이나 치근으로의 사용이 증가하고 있다. 그러나 교합면에서의 취약한 마모특성으로 인해 wear debris에 의한 골 흡수 및 이완 등을 야기하는 문제점으로, 이의 개선에 관한 연구가 활발히 진행되어 왔다. 다이아몬드상 카본 (Diamond-Like-Carbon) 박막은, 다이아몬드와 유사한 높은 경도, 내마모성 그리고 화학적 안정성 등의 매우 우수한 물리화학적 특성을 가지고 있는 박막재료로 고체 윤활박막으로서 hard disk나 VCR head drum의 보호막, 우주항공기의 bearing 재료코팅 등으로의 적용이 최근에 급격히 증가하고 있다. 본 연구에서는 이와 같은 특성을 지닌 다이아몬드상 카본 박막의 생체재료로의 적용을 위해, CP Ti과 Ti-6Al-4V에 13.56MHz를 사용하는 r.f PACVD법으로 DLC를 증착하여 생체적합적 특성을 조사하였다. C6H6 가스를 사용하여 1$\mu\textrm{m}$의 두께로 DLC 박막을 증착하였으며, 기판과의 밀찰력 향상을 위해 Si을 증간층으로 합성하였다. 마모특성은 pin-on-disk type wear tester을 사용하였으며 직경 5mm의 ruby ball로 실험을 수행하였다.

• Proceedings of the Safety Management and Science Conference
• /
• 2000.11a
• /
• pp.287-291
• /
• 2000

고객의 요구는 더욱더 개성화, 다양화되고 있고, 글로벌 시장은 다양한 가치관, 문화, 전통을 바탕으로 지역적인 개성을 추구한다. 전 세계에 그물처럼 엮어진 인터넷망은 시간과 거리의 제약을 완전히 없앴다. 기업은 국가와 대륙을 초월한 세계 무대에서 치열한 경쟁을 전개하고 있다. 이러한 상황에서 고객의 요구를 파악하여 이에 부합되는 제품의 생산 및 판매가 기업 경영에 있어서 주요 이슈로 등장하고 있으며, 이러한 추세는 제품 개발 기술의 보편화로 고객에 대한 서비스의 차별화로 집중되고 있다. 이런 수요를 충족시키기 해서는 CRM(Customer Relationship Management) 개념이 도입되어야 하고, 제조공정을 개선하며 경쟁력을 강화하기 위해서는 모든 기업이 고객의 가치를 최대화 할 수 있는 동기화 생산이 필수적이라고 하겠다. 본 연구에서는 CRM의 고객정보분류 방법 중 하나인 FART(F;Frequency, R;Recency, A;Amount, T;Type of merchandise/service)를 이용하여 주요고객을 분류하고, 이 정보를 Drum-Buffer-Rope 스케줄링 방법에 반영하여 기업의 생산능력과 우수고객 주문을 고려한 일정계획 방법을 제시한다. 이 결과로 우수고객에 대한 서비스 수준을 향상시키고 궁극적으로는 기업의 이윤을 최대화하는데 기여하고자 한다.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.673-675
• /
• 1995

A nonlinear process-model based control for main steam temperature control of a 100MW oil-fired drum-type fossil power plant is delveloped and its performances are compared to those of the conventional PID control. The process model for simulation is derived based "first priciple approach" and is validated in steady and transient conditions. The model is in good agreements with the field test data. Performances of the nonlinear PMBC for main steam temperature control are far superior to those of PID in all aspects for the disturbances of ramp increase in load and step change in fuel Btu value.

• Electrical & Electronic Materials
• /
• v.7 no.5
• /
• pp.409-416
• /
• 1994

A double layered photoreceptor using phthalocyanine dye was made by dip-coating method. The under cutting layer(UCL) was coated with A1$\_$2/O$\_$3/ or polyamide, and the charge generation layer(CGL) was formed by .tau.-type metal-free phthalocyanine. The oxadiazole was used as a charge transport layer(CTL) and polycarbonate and poly(vinyl butyral) was employed as a host polymer. The .tau.-H$\_$2/Pc had an absorption peak around 780nm, which coincided with the emitting wavelengths of GaAlAs diode lasers. Maximum charge acceptance of CTL that gives thickness of 12.mu.m was -900V by corona charge of -6.0kV. In photo-induced discharge measurements, residual potential was less than -20V and sufficient for ordinary use, and sample films using of poly(vinyl butyral) was showed good charge retention. In printing test, drum that was employed polycarbonate as a host polymer showed the good print quality.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.450-453
• /
• 1996

This research presents a new method of detecting and diagnosing faults of a power plant. Detection of characteristic wave patterns from multichannel instrumentation signals forms the basis of the proposed approach. The dynamics of 500MW drum-type boiler (Boryung coal-fired plant unit #1 and #2) and its control systems are modeled and simulated to generate diverse operation patterns and fault situations and to utilize them for the development of the fault detection algorithms. The results of the boiler system modeling and simulations show a fairly high agreement when compared with some of the actual plant performance test data.

• Resources Recycling
• /
• v.28 no.3
• /
• pp.21-25
• /
• 2019

The utilization of incineration ash from municipal waste must be promoted to solve the social problem on the shortage of final disposal site. In this research, metals should be recovered to avoid the damage of the crushing machine during the utilization of incineration ash in cement industry. In fact, incineration bottom ash from municipal waste contains iron in 3-5%. Nonferrous metal and stainless steel in 1% is also included. The research and development on the physical recovery process was performed not only to remove the metals but also to recover high grade products. Metals were separated from incineration ash in Maruya Co. Ltd.. In fact, iron scrap recovered by magnetic separation can be selled. After that, mixed metal was separated from incineration ash using screen. In this research, mixed metal tried to divided copper, aluminum, brass and stainless steel using drum type magnetic separation, eddy current separation and high magnetic separation. As a result, recovered iron had an 80% for the grade. Aluminum was recovered by eddy current separation without copper and brass.

• Journal of the Korean Society of Costume
• /
• v.59 no.5
• /
• pp.180-201
• /
• 2009

I scrutinized the idea that Parhae Marek was inherited from Kokuryo which was presented in "The study on the Marek" published in the journal of the Korean Society of Costume 55-5, and concluded the following results: 1. The Marek which Samguk sagi recorded is the red head scarf used for dancers who do Koguryo dance in the Babarian Music System in Tang dynasty. Since its original record Tong dian tells that Kokuryo performers' costumes then had strikingly changed and Quichi and GaoChang dancers also wore Marek, so the idea that Marek was originated from Koguryo should be reconsidered. 2. Considering the Yaksoori mural's indistinguishable condition as well as the same scenes from other Kokuryo mural paintings, I can't evidently tell that the first person who carries shouldering drum puts Marek on. 3. should be pronounced [Mal] for the meaning of a head scarf and its definition can't be limited only for the sash type. 4. Diverse historical data on head scarves deny the assumption that the sash type of hairband would have been succeeded from Kokuryo to the Parhae Marek. 5. The Marek of Princess Junghyo's mural painting can be an example that shows the costume of Tang influenced Parhae's. But the similarity in styles of costume between contemporary countries doesn't mean their reciprocal racial or political identity.

• Journal of Biosystems Engineering
• /
• v.33 no.1
• /
• pp.14-20
• /
• 2008

An agricultural unmanned helicopter was suggested for an alternative to current pesticide application methods to solve such problems as high cost, low efficiency, shirking task and unsafe work. To pursuit this trend, researches on the development of unmanned helicopters have been accelerated in Korea as well. In this research, a guide type centrifugal clutch that plays an important role in the unmanned helicopter was studied. Theoretical analyses and experimental tests were conducted for designing an optimal clutches. Main design factors of the guide type centrifugal clutch were found to be spring constant, free length of spring, mass of friction sector, contact area, allowable pressure, number of friction sector, friction coefficient, radius of drum, and clutch arrangement. And these design factors could be the functions of engaging engine speed and desired power transfer capacity. The result of the single clutch test showed the power transfer capacity of 14.1 PS at 5,800 rpm and the result of the dual clutch test showed that the capacity of 17.7 PS at 5,600 rpm. These experimental results agreed well the theoretical simulations.

• Journal of the Korean Institute of Gas
• /
• v.5 no.3 s.15
• /
• pp.23-28
• /
• 2001

BOG(Boil Off Gas) is formed about 0.05 vol$\%$/day from LNG tanks of LNG receiving terminal. To recycle the BOG using LNG cold energy, the quantities of LNG and BOG is mixed at the ratio of 11 : 1 by mass in the recondenser of mixing drum type. However, this process is inefficient in the view of energy. It is the most necessary for improvement BOG recondensing process to reduce LNG quantities supplying to recondense system. Therefore, this study has aimed to propose heat exchanger type and suggest results through the analysis of ASPEN PLUS simulator and feasibility study.