• Korean Chemical Engineering Research
• /
• 제47권5호
• /
• pp.630-638
• /
• 2009

생활폐기물 소각장에서 발생되는 질소산화물($NO_x$)을 저감을 위한 요소용액 이용 선택적 무촉매 환원(SNCR: selective non-catalytic reduction) 상용화 공정에 대하여 전산유체역학(CFD: computational fluid dynamics) 모델을 개발하였고, 이 모델은 현장 실험결과로 검증되었다. 저 농도 일산화탄소와 12% 과잉공기 조건에서 요소와 질소산화물간의 7개 화학반응식과 액적의 증발과정을 포함하는 3차원 난류반응 흐름 CFD 모델은 소각로에 설치된 SNCR 공정의 유체역학 모사를 위하여 사용하였다. 본 SNCR 공정에서는 정면 노즐 1개와 측면 노즐 2개를 사용하여 2차 연소로 내에 요소용액을 공기와 함께 분사하였다. 3개의 노즐에 동일유량으로 NSR=1.8에서 요소용액과 공기를 분사할 경우, 출구온도는 현장 실험값과 모사값이 일치하며, 질소산화물 저감효율은 실험에서는 57%, CFD 모사에서는 59%를 보여주었다. 각 노즐 별 분사유량의 비율을 변화하면서 수행된 CFD 모사 결과에서는 3개의 노즐에 동일 유량을 분사하는 것보다 정면 1개 노즐에 측면노즐 유량의 2배를 분사하는 것이 약 8% 높은 질소산화물저감 효율을 보여주었다.

• 한국화재소방학회논문지
• /
• 제22권3호
• /
• pp.216-220
• /
• 2008

물분무소화설비는 화원의 냉각, 주변공기의 희석, 미세한 물방울의 증발에 의한 열차단과 같은 소화특성을 이용한다. 미분무수의 운동량은 입자가 큰 물방울에 비해 상대적으로 낮으며 화원의 침투능력도 효과적이지 못하다. 증발된 수증기에 의한 기여는 무게가 가볍고 밀도가 희박하여 화원에 일부분으로 제한되는 경향이 있다. 반면, 사이클식 미분무 패턴은 성층화된 분무 특성에 의해 공기 추출능력과 침투력이 개선될 것으로 예상된다. 이 논문에서는 유체공학적 화재모델인 FDS를 사용하여 교번식 미분무 패턴에 대해 분석된 소화능력을 다룬다. 저자는 이 분석이 미분무 노즐의 표본을 개발하기 위한 기본 개념을 제공할 수 있기를 기대한다.

• 반도체디스플레이기술학회지
• /
• 제21권4호
• /
• pp.81-85
• /
• 2022

Mist-CVD is known to have advantages of low cost and high productivity method since the precursor solution is misting with an ultrasonic generator and reacted on the substrate under vacuum-free conditions of atmospheric pressure. However, since the deposition distribution is not uniform, various efforts have been made to derive optimal conditions by changing the angle of the substrate and the position of the outlet to improve the result of the preceding study. Therefore, in this study, a deposition distribution uniformity model was derived through the shape and position of the substrate support and the conditions of inlet flow rate using the particle tracking method of computational fluid dynamics (CFD). The results of analysis were compared with the previous studies through experiment. It was confirmed that the rate of deposition area was improved from 38.7% to 100%, and the rate of deposition uniformity was 79.07% which was higher than the predicted result of simulation. Particle tracking method can reduce trial and error in experiments and can be considered as a reliable prediction method.

• Journal of Mechanical Science and Technology
• /
• 제16권11호
• /
• pp.1511-1521
• /
• 2002

High-speed moist air or steam flow has long been of important subject in engineering and industrial applications. Of many complicated gas dynamics problems involved in moist air flows, the most challenging task is to understand the nonequilibrium condensation phenomenon when the moist air rapidly expands through a flow device. Many theoretical and experimental studies using supersonic wind tunnels have devoted to the understanding of the nonequilibrium condensation flow physics so far. However, the nonequilibrium condensation can be also generated in the subsonic flows induced by the unsteady expansion waves in shock tube. The major flow physics of the nonequilibrium condensation in this application may be different from those obtained in the supersonic wind tunnels. In the current study, the nonequilibrium condensation phenomenon caused by the unsteady expansion waves in a shock tube is analyzed by using the two-dimensional, unsteady, Navier-Stokes equations, which are fully coupled with a droplet growth equation. The third-order TVD MUSCL scheme is applied to solve the governing equation systems. The computational results are compared with the previous experimental data. The time-dependent behavior of nonequilibrium condensation of moist air in shock tube is investigated in details. The results show that the major characteristics of the nonequilibrium condensation phenomenon in shock tube are very different from those in the supersonic wind tunnels.

• 한국화재소방학회논문지
• /
• 제33권6호
• /
• pp.1-8
• /
• 2019

본 연구에서는 물 분무 액적 특성 변화가 화재 진압에 미치는 영향을 FDS 6.5.2를 이용하여 수치적으로 분석하였다. 물 분무 노즐의 소화계수, 액적 분포함수, 중간체적 직경 및 초당 액적 수 변화에 대한 화재진압 특성은 정규 열방출률 곡선의 감소율와 냉각시간의 측면에서 평가되었다. 소화계수가 증가하면 정규열방출률 곡선이 더 급격하게 감소하고, 중간체적입경 변화가 화재진압에 영향을 미치는 것을 확인하였다. 단일 액적분포에서 초당액적수의 증가에 따라 정규 열방출률 곡선은 더 완만하게 감소하였으며, 다중분포에서는 초당액적수가 작은 조건에서만 정규 열방출률 곡선이 급격하게 감소하는 것을 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.450-455
• /
• 2001

The time-dependent behavior of nonequilibrium condensation of moist air through the Ludwieg tube is investigated with a computational fluid dynamics(CFD) method. The two-dimensional, compressible, Navier-Stokes equations, fully coupled with the condensate droplet growth equations, are numerically solved by a third-order MUSCL type TVD finite-difference scheme, with a second-order fractional time step. Baldwin-Lomax turbulence model is employed to close the governing equations. The computational results are compared with the previous experiments using the Ludwieg tube with a downstream diaphragm. The results clearly show that for an initial relative humidity below 30% there is no periodic oscillation of the condensation shock wave, but for an initial relative humidity over 40% the periodic excursions of the condensation shock occurs in the Ludwieg tube, and the frequency increases with the initial relative humidity. It is also found that total pressure loss due to nonequilibrium condensation in the Ludwieg tube should not be ignored even for a very low initial relative humidity, and the periodic excursions of the condensation shock wave are responsible for the total pressure loss.

• Journal of Mechanical Science and Technology
• /
• 제17권12호
• /
• pp.2066-2077
• /
• 2003

The time-dependent behavior of unsteady condensation of moist air through the Ludwieg tube is investigated by using a computational fluid dynamics (CFD) work. The two-dimensional, compressible, Navier-Stokes equations, fully coupled with the condensate droplet growth equations, are numerically solved by a third-order MUSCL type TVD finite-difference scheme, with a second-order fractional time step. Baldwin-Lomax turbulence model is employed to close the governing equations. The predicted results are compared with the previous experiments using the Ludwieg tube with a diaphragm downstream. The present computations represent the experimental flows well. The time-dependent unsteady condensation characteristics are discussed based upon the present predicted results. The results obtained clearly show that for an initial relative humidity below 30% there is no periodic oscillation of the condensation shock wave, but for an initial relative humidity over 40% the periodic excursions of the condensation shock occurs in the Ludwieg tube, and the frequency increases with the initial relative humidity. It is also found that total pressure loss due to unsteady condensation in the Ludwieg tube should not be ignored even for a very low initial relative humidity and it results from the periodic excursions of the condensation shock wave.

• 한국수소및신에너지학회논문집
• /
• 제25권4호
• /
• pp.443-448
• /
• 2014

This paper describes thermal flow characteristics in various pipelines: straight pipeline and curved pipeline. In the permafrost area, pipelines are exposed to an extremely low temperature ($-40^{\circ}C$). In this situation, three-dimensional flow analysis should be analyzed to investigate thermal effects such as pressure drop, temperature change, velocity deficit and distribution change of liquid droplet of internal fluid. In this paper, multi-phase and multi-species analysis was introduced to analyze the flow characteristics of permafrost pipelines on the vertical support members above ground.

• 대한기계학회논문집B
• /
• 제30권5호
• /
• pp.489-495
• /
• 2006

Proton exchange membrane (PEM) should be sufficiently hydrated with a careful consideration of heat and water management. Water management has been a critical operation issue for better understanding the operation and optimizing the performance of a PEM fuel cell. The flooding on cathode side resulting from excess water can limit the fuel cell performance. In this study, the visual cell was designed and fabricated fur the visualization of liquid water droplet dynamics related to cathode flooding in flow channels. The experiment was carried out to observe the formation, growth and removal of water droplets using CCD imaging system. Effects of operating conditions such as cell temperature, air flow rate and air relative humidity on cathode flooding characteristics were mainly investigated. Based on this study, we can get the basic insight into flooding phenomena and its two-phase flow nature. It is expected that data obtained can be effectively used fur the setup and validation of two-phase PEM fuel cell models considering cathode flooding.

• 한국기계가공학회지
• /
• 제18권1호
• /
• pp.16-23
• /
• 2019

Cooking oil in kitchen-fog is the most harmful factor to the health of a cook. The proposed filter is a tool that protects the cooked state, to prevent users from inhaling oil mist in the kitchen. Due to efficiency issues, existing filters are of the mesh type or baffle type. In this paper, CFD analysis is carried out to select a filter with low pressure loss and low efficiency, and to attach the sub-filter to improve efficiency. The results of the analysis on the collection efficiency and pressure loss of three sub-filters, i.e., circle type, droplet type, and cone type, showed that the collection efficiency was 64.09% and the pressure loss was 1.26 mmAq when the circle type sub-filter was applied. The position of the sub-filter showed the best efficiency and pressure loss when it was located at the bottom of the center of the gap of the main filter.