• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.2
• /
• pp.281-286
• /
• 2010

Effects of soaking period on physicochemical characteristics of chokong (black soybean picked in brown rice vinegar) and soaking solution were investigated. The pH and soluble solid contents in soaking solution increased rapidly whereas total acidity decreased during the first 4 days of soaking. The sudden drop of color 'L' and 'b' values in soaking solution occurred one day after start of soaking; in contrast, 'a' value increased by 1 day, and then decreased for soaking periods. The strength and hardness of chokong showed a decreasing trend as soaking for a long time, and the values of chokong were lower than those of control (black soybean soaked in water and freeze dried). The protein bands of chokong for soaking appeared only under 24,000 Da of molecular weight by electrophoresis. The content of total amino acids of chokong pickled for 7 days was 86.86 mg%, about 3 times for 28.36 mg% of raw black soybean. The contents of essential amino acids, especially, leucine and phenylalanine increased greatly in chokong. In vitro digestibility for protein was 62% in raw black soybean and 84% in chokong pickled for 7 days. Therefore, these results may assumed that chokong will be good source of amino acids.

• Fashion & Textile Research Journal
• /
• v.13 no.4
• /
• pp.600-613
• /
• 2011

The purpose of this study is to provide Torso pattern for Korean middle-aged women using 3D human body scan data. 155 women in their 40's or 50's were measured by Martin's anthropometry. Merging the data of 914 middle aged women provided by Korean agency for technology and standards, total of 1,069 subjects' data were analyzed. For data analysis, ANOVA, factor analysis and cluster analysis were done using SPSS PC+. And representative subject of each cluster was selected and they participated in 3D scanning and Torso pattern suggested for middle-aged women Torso pattern which investing the amount of ease according to each group for diffuse front interscye 30%, armscye circumference 30%, back interscye 40% using 3D human body scan data. The results of this study are as follows. Firstly, as a result of the factor analysis, the first factor was 'obesity index of body', The second factor was 'verticality size of body', The third factor was 'verticality length of upper bodice', The fourth factor was 'drop value to represent silhouette', and the fifth factor was 'physique of upper bodice'. And, middle-aged women type were classified 3 types according to the cluster analysis. Type 1(Y-type) was the long upper Torso with wide shoulder. Type 2(H-type) was flat-body type with comparatively thin upper bodice and thin lower bodice. And type 3(A-type) was the obese type with comparatively thin upper bodice and fat lower bodice. Secondly, using CAD program, point filtering was performed and approximated surface model was made. It used that generated surface smoothing corrected for abnormally extruded points and scattered points based on the curvature information. And 3D surfaces were flatted onto the plane by the internal tools of CAD program. Difference ratios of outline length and area between 3D curves and 2D plane were 0.42% and 0.54%, respectively. Third, wearing test by the sensory evaluation showed that distinct difference almost every category. The movement functionality test shows that, in all the tests which reveal significant differences, especially, 'comparison pattern A' experienced inconvenience to neck width and neck depth.

• Korean Journal of Clinical Laboratory Science
• /
• v.49 no.4
• /
• pp.366-373
• /
• 2017

Urinalysis is considered to be easier and simpler than other tests. It has been known to cause no burden to patients, while offering important information on diagnosing, treating, and determining the prognoses of kidney and urinary tract diseases. Urinary sediments are usually performed by microscopic examination of centrifuged urine by technologist. The guidelines proposed by the Korean Association of External Quality Assessment Service are actually different from those actually practiced by medical institutions and taught to biomedical students in textbooks. Therefore, we verified whether different sediment preparation methods lead different test results. Specimens that tested positive from the occult blood and leukocyte esterase in the urine dipstick test were randomly selected for a microscopic examination. The differences in the urine sediment preparation affected the sediment concentrations, which influenced the cell grade and cell number per HPF. The first factor in determining the sediment concentration is the centrifugal force. Many medical institutions use 1,500 rpm as the centrifugal speed without considering the radius of the centrifuge; such a value may not be accurate for 400 G. Consequently, there were differences in urine concentrations, which influenced the results. The second factor is the amount of sediment in urine. Different amounts of the remaining supernatant led to different sediment concentration factors, again, causing different results. Furthermore, not only by using a pipette to obtain an accurate amount as stipulated, but also by roughly obtaining a drop, the microscopic examination using such a volume of sediment examined affected the results. Therefore, this study highlights the importance of standardization of urine sediment preparation procedures to promote consistency and accuracy across institutions.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.5
• /
• pp.475-479
• /
• 2012

We present a novel polymer fabrication process involving direct UV patterning of a hyperbranched polymer, AEO3000. Compared to PDMS, which is the most widely used polymer in bioMEMS devices, the present polymer has advantages with regard to electrode integration and fast fabrication. We designed a four-chip microelectrofluidic bench having three electrical pads and two fluidic I/O ports. We integrated a microfluidic mixer and a cell separator on the bench to characterize the interconnection performance and sample manipulation. Electrical and fluidic characterization of the microfluidic bench was performed. The measured electrical contact resistance was $0.75{\pm}0.44{\Omega}$, which is small enough for electrical applications, and the pressure drop was 8.3 kPa, which was 39.3% of the value in the tubing method. By performing yeast mixing and a separation test in the integrated module on the bench, we successfully showed that the interconnected chips could be used for bio-sample manipulation.

• Journal of Conservation Science
• /
• v.29 no.1
• /
• pp.47-54
• /
• 2013

The following study tests for the effects of mordants on the production of restoration papers during the conservation process of damaged paper artifacts. For this, four different types of synthetic mordants that are being marketed currently ($K_2CO_3$, $AlK(SO_4)_2{\cdot}12H_2O$, $Cu_2SO_4{\cdot}5H_2O$, $FeSO_4$) were selected to produce samples for measuring variable properties through artificial degradation. The research conducts tests for changes in color, tensile index, and pH level (degree of acidity). The results for changes in color have shown that the value of ${\Delta}E^*ab$ of $K_2CO_3$ mordant sample was the highest, and the tests for tensile index have shown that the strength of dyeing sample was decreased in accordance with the aging time, but Changes according to the mordant was not evident. Finally, the findings for pH level have shown that samples with $Cu_2SO_4{\cdot}5H_2O$ and $FeSO_4$ have pH levels drop below 6. As a result, the research have concluded that mordants used for dyeing restoration paper were identified to have an affect in the dyeing and aging characteristics of the paper.

• Applied Biological Chemistry
• /
• v.14 no.1
• /
• pp.35-41
• /
• 1971

Changes in fatty substance of hot pepper fruit during the after-ripening period were studied for both neutral and polar fatty substance. The results obtained from these studies are tabulated as follows; 1. Total fatty substance decreased as the after-ripening proceeded, while neutral fatty substance was least during the climacteric period. Polar fatty substance showed sudden drop in the amount during the post-climacteric period. 2. Fatty acid composition in neutral fatty substance showed that there is decrease in linoleic acid during the post-climacteric period, and in myristic acid and oleic acid respectively during the climacteric period. Stearic acid contents also drops sharply as after-ripening proceeds. 3. Value for saturates to unsaturates in and the amount of neutral fatty substance became least during the climacteric period, indicating that there is relationship between metabolism of neutral fats and climacteric rise. 4. Fatty acid composition of polar fatty substance showed that there is decrease in linoleic acid when after-ripening takes place whereas linolenic acid increases. These became reverse in the amounts after the climacteric period, suggesting that these changes may be useful to indicate true maturity of the fruits.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.1
• /
• pp.23-33
• /
• 2015

This study was carried out for the purpose of minimizing the area of rapid flow inside the water tank. And the shape of incurrent canal was improved, and then the characteristics of fluid flow occurring inside the water tank was analyzed by using the Computational Fluid Dynamics (CFD) simulation method. better multiple hoe screw nozzle incurrent canal was used instead of conventional drop current canal used for the water tank. And according to the results of analyzing the characteristics of fluid flow, in case a screw blade was installed inside the nozzle, fluid flow was sprayed wide. And wide fluid flow was shown inside the cylindrical water tank too. Besides, a tracer simulation was carried out, in case of installing 1 and 2 multiple hoe screw nozzle incurrent canals at the cubic water tank. As a result, MODAL, MODAL index value was close to 1, in case of installing 2 canals. Therefore, it was possible to obtain the results of being close to the characteristics of plug flow.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.6
• /
• pp.580-586
• /
• 2016

Cr-Si-Al-N coating with different Si content were deposited by hybrid physical vapor deposition (PVD) method consisting of unbalanced magnetron (UBM) sputtering and arc ion plating (AIP). The deposition temperature was $300^{\circ}C$, and the gas ratio of $Ar/N_2$ were 9:1. The CrSi alloy and aluminum targets used for arc ion plating and sputtering process, respectively. Si content of the CrSi alloy targets were varied with 1 at%, 5 at%, and 10 at%. The phase analysis, composition and microstructural analysis performed using x-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM) including energy dispersive spectroscopy (EDS), respectively. All of the coatings grown with textured CrN phase (200) plane. The thickness of the Cr-Si-Al-N films were measured about $2{\mu}m$. The friction coefficient and removal rate of films were measured by a ball-on-disk test under 20N load. The friction coefficient of all samples were 0.6 ~ 0.8. Among all of the samples, the removal rate of CrSiAlN (10 at% Si) film shows the lowest values, $4.827{\times}10^{-12}mm^3/Nm$. As increasing of Si contents of the CrSiAlN coatings, the hardness and elastic modulus of CrSiAlN coatings were increased. The morphology and composition of wear track of the films was examined by scanning electron microscopy (SEM) and energy dispersive spectroscopy, respectively. The surface energy of the films were obtained by measuring of contact angle of water drop. Among all of the samples, the CrSiAlN (10 at% Si) films shows the highest value of the surface energy, 41 N/m.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.1
• /
• pp.20-33
• /
• 2002

Usage of ATM AAL2 packets becomes dominant to increase transmission efficiency of voice traffic in the backbone network. In case of voice service that uses AAL2 mechanism, if resources of network are enough, connection of new call is accepted. However, due to packets generated by the new call, transmission delay of packets from old calls can increase sharply. To control this behavior, in this paper we present an AAL2 buffer management scheme that allocates a virtual buffer to each call and after calculating its propagation delay variation(PDV), decides to drop packets coming from each call according to the PDV value. We show that this packet dropping algorithm can effectively prevent abrupt QoS degradation of old calls. To do this, we analyze AAL2 packet composition process to find a critical factor in the process that influences the end-to-end delay behavior and model the process by K-policy M/D/1 queueing system and MIN(K, Tc)-policy M/D/1 queueing system. From the mathematical model, we derive the probability generating function of AAL2 packets in the buffer and mean waiting time of packets in the AAL2 buffer. Analytical results show that the AAL2 packet dropping algorithm can provide stable AAL2 packetization delay and ATM cell generation time even if the number of voice sources increases dramatically. Finally we compare the analytical result to simulation data obtained by using the COMNET Ⅲ package.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.10
• /
• pp.33-41
• /
• 2000

Pyroelectric characteristics such as voltage responsivity, noise equivalent power and detectivity are modeled 3-dimensionaly considering th interaction of each parameters. Also, the circuit is designed to set up the frequency band width and the signal amplification of the pyroelectric IR sensor. The case of low frequency region shows that the voltage response increases with the independence of the sensor area as the thickness decreases. In the high frequency region, it is found that the voltage response with the load resistor of 20$G{\Omega}$ increases with the independence of the sensor thickness as the sensor area decreases. In the low frequency region, the detectivity becomes excellent at th load resistor of 20$G{\Omega}$, the sensor area larger than $4{\times}10^{-10}m^2$ and the sensor thickness thinner than $1{\times}10^{-5}m$, while, in the high frequency region, it shows high value at the sensor thickness thinner than $1{\times}10^{-5}m$ and the sensor area smaller than $2{\times}10^{-10}m^2$ with the independence of the load resistor. In the circuit design, quasi-boot-strap circuit is employed, in which a single op-amp is connected to the drain of JFFT. Desirable frequency band width, amplification rate and the remarkable drop of noise of about 56% from that of conventional circuits with double op-amps are obtained.