• 제목/요약/키워드: Drop Value

검색결과 527건 처리시간 0.027초

알칼리 전처리에 의한 슬러지 호기성 소화 및 액비 특성 변화 (Effect of Alkaline Pretreatment on Sludge Aerobic Digestion and Fertilizer Value)

  • 황응주
    • 대한환경공학회지
    • /
    • 제30권1호
    • /
    • pp.90-96
    • /
    • 2008
  • 슬러지 직매립 금지와 런던협약에 따른 해양투기의 금지로 인해 하수슬러지의 처리 대안 연구가 다방면으로 진행되고 있으며 본 연구에서도 슬러지를 안정화시켜 액비로 재활용하는 기술에 대한 실험연구가 수행되었다. 슬러지 가용화를 위해 알칼리 전처리를 도입하였고 전처리된 슬러지를 호기성 소화조의 기질로 투입하여 유기물 및 질소화합물의 성상 변화를 관찰하였다. 또한 pot test를 통해 처리된 슬러지의 액비 이용 가능성을 평가하였다. 그 결과 알칼리 전처리된 슬러지를 호기성 소화조의 기질로 투입할 경우 전처리되지 않은 슬러지를 투입할 경우에 비해 SS 분해율은 57%에서 66%로 VSS 분해율은 59%에서 69%로 증가하였으며, 슬러지를 전처리할 경우 소화조의 체류시간 감소가 예측되었다. 알칼리 전처리와 호기성 소화를 통해 TCOD의 94.1%가 감소되었고, 최종 SCOD는 220$\sim$230 mg/L로 낮아 유기물이 안정화됨을 나타내었다. 소화조에서 질산화와 이로 인한 pH 저하 현상이 발견되었으며 전처리하지 않은 경우(445.4 mgN/L)가 전처리한 경우(223.1 mgN/L)보다 높은 질산농도와 낮은 pH값(최저 3.0)을 보였다. 슬러지를 액비로 이용할 경우 오이 묘목 잎의 성장은 소화 처리된 슬러지, 전처리 및 소화된 슬러지, 처리되지 않은 슬러지, 증류수의 순으로 높았으며 질산성 질소의 농도, 슬러지 투입량은 잎의 성장과 정의 상관성을 보였다. 전처리와 소화를 병행할 경우 처리하지 않은 슬러지보다 잎과 줄기의 생육 모두를 향상시켰으나, 소화만을 거친 슬러지는 처리하지 않은 슬러지보다 잎의 성장은 크게 향상시키고 줄기의 성장은 다소 저하시켰다.

태양열에너지 시스템용 부동액 농도 제어 장치의 개발 (Development of Antifreeze Concentration Control device for Solar Heat Energy System)

  • 서충길;원종운
    • 한국산학기술학회논문지
    • /
    • 제19권4호
    • /
    • pp.1-7
    • /
    • 2018
  • 화석연료를 사용하는 내연기관에서 배출되는 가스는 환경오염, 지구온난화와 인체에 유해하여 많은 사회적인 문제를 야기시키고 있다. 최근에는 신재생에너지의 수요가 증가하고 있으며, 정부의 정책적인 지원과 연구개발 또한 활발하다. 가정에서 많이 사용되는 태양열에너지 시스템의 집열부는 열매체로 프로필렌글리콜 부동액이 물과 50% 고정된 값으로 혼합되어 영하온도에서도 집열부에 열을 전달한다. 그러나 집열부 내의 열매체에 누수가 발생되면 태양열시스템 특성상 보충수를 태양열 집열부에 공급하는데, 이로 인하여 보충수 내의 급수로 인하여 부동액 농도가 낮아지게 된다. 이에 따라 태양열 집열부위의 온도가 저하되어 동파를 야기하게 되는데 태양열에너지 시스템 정비 보수를 위해서 비용 부담이 증가하여 많은 문제점을 증가시킨다. 이 연구는 태양열에너지 시스템에 발생되는 동파 방지를 위하여 온도 저하에 따라 자동으로 부동액 농도를 제어가능한 장치를 개발하는 것이다. 물 성분이 프로필렌글리콜보다 전기전도도가 크며, 온도가 저온으로 내려갈수록 저항값이 증가하였다. 프로필렌글리콜 농도 제어 목표값 40, 50 및 60% 값은 39.6, 50.7 및 60.1%의 프로필렌글리콜 농도값으로 보정을 통하여 제어를 해야 한다.

보조계면활성제가 Pluronic L64 비이온 계면활성제에 의한 탄화수소 오일 가용화에 미치는 영향 (Effect of Cosurfactant on Solubilization of Hydrocarbon Oils by Pluronic L64 Nonionic Surfactant Solution)

  • 배민정;김도원;조서연;임종주
    • Korean Chemical Engineering Research
    • /
    • 제52권2호
    • /
    • pp.219-225
    • /
    • 2014
  • 본 연구에서는 보조계면활성제 첨가가 n-octane, n-decane, n-dodecane 등의 탄화수소 오일의 가용화에 미치는 영향에 관하여 살펴보았다. 탄화수소의 가용화 속도는 보조계면활성제로 첨가한 알코올의 사슬 길이와 첨가량이 증가함에 따라 증가하였으며, 특히 사술 길이가 비교적 긴 알코올을 첨가하는 경우, 탄화수소 오일의 가용화 속도가 크게 증가하였다. 이는 1-butanol과 같이 짧은 사슬을 가진 수용성 알코올을 첨가할 경우에는 첨가한 대부분의 알코올이 수용액상에 존재하여 탄화수소 오일의 가용화에 큰 영향을 주지 못하는 반면에, 1-hexanol이나 1-octanol과 같이 비교적 사슬길이가 긴 알코올을 보조계면활성제로 첨가한 경우에는 첨가한 대부분의 알코올이 마이셀 상에 위치하여 마이셀을 보다 flexible한 packing을 갖게 함으로써, 가용화를 용이하게 한 것으로 생각된다. 가용화 속도 실험 결과는 spinning drop tensiometer를 사용하여 탄화수소 오일과 계면활성제 수용액 사이의 동적 계면장력을 측정한 결과와 동일한 경향을 나타내었다. 즉, 첨가한 알코올의 사슬 길이가 증가할수록 평형에서의 계면장력 값은 감소하며, 또한 계면장력 값이 평형에 도달하는 시간은 감소하였다.

톨루엔으로 오염된 공기의 생물학적 여과에 대한 필터용 담체의 영향 (The Effect of Filter Media on the Biofiltration of Air Contaminated by Toluene)

  • 홍성도;한희동;명성운;최호석;김인호
    • KSBB Journal
    • /
    • 제16권6호
    • /
    • pp.603-608
    • /
    • 2001
  • 낮은 농도 (0.41 g/㎥)에서 바이오필터 장치의 제거효율은 5 L/min과 10L/min에서 각각 30~70% 이상을 보여주는 반먼에 고농도 (1.23 g/㎥)에서의 효율은 10~60%이다. 그리고 Synthesized media를 담체로 사용한 바이오필터의 성능이 다른 바이오필터에 비하여 좋지 않았으며, barks를 사용한 바이오필터에 비하여 좋지 않았으며, barks를 사용한 바이오필터의 제거율이 입구농도 0.8g/㎥에서 약 70%로 가장 좋은 성능을 보였다. 이는 합성담체가 porous하여 그 보습능력이 다른 담체들에 비하여 떨어지기 때문임을 알 수 있었다. 바이오필터가 제거할 수 있는 공기중의 톨루엔양은 입구의 단위 시간당 농도를 증가시킴으로써 제거량이 증가함으로 알 수 있었으며, barks를 담체로 사용한 바이오필터의 제거량이 유입 부하량 40 g/㎥에서 최대 30 g/㎥으로 가장 우수한 것으로 나타나, 수분 및 활성의 유지가 안돼는 악의 조건하에서의 바이오필터 적응능력 면에서는 bark를 사용하는 것이 가장 바람직함을 알 수 있었다. 한편 바이오필터의 우수한 거동을 위해서는 필터층의 적당한 수분함량 조절이 가장 필수적이며, 각 바이오필터의 pH 변화는 7~8로써, 중성영역을 유지하는 것이 바람직하였다. 모든 바이오필터 시스템에서 압력강하는 0.054 cm$H_2O$/m로서 무시할 만큼 낮았고, 특히 합성담체의 경우에 다른 담체들에 비하여 압력손실이 현저히 낮았다.저히 낮았다.

  • PDF

20대와 30-40대 여성의 하반신 신체치수 및 체형 비교 연구 - 다운에이징(Down-aging) 의복구매 현상에 따른 문제점 파악을 중심으로 - (Comparative Study on Size and Type of Lower Body of Women in Their 20s and 30s-40s - Focusing on Determining Problems by the Phenomenon of Purchasing Down-aging Clothes -)

  • 김은경
    • 한국의상디자인학회지
    • /
    • 제16권3호
    • /
    • pp.201-217
    • /
    • 2014
  • There is likely to be a fit problem when women aged in their 30s-40s purchase down-age clothing from brands that target women in their 20s. To identify the part of the lower body that causes the fit problem, the sizes and types of lower body of women in their 30s-40s were compared with those of women in their 20s. The data for this study was from the 2010 Size Korea survey of body measurements of 1675 female adults in their 20s-40s. To examine differences in the average sizes of the lower body between women in their 20s and 30s-40s, descriptive statistics and t-tests were conducted. Factor and cluster analysis were used to classify body types by age groups. On the whole, compared to women in their 30s-40s, women in their 20s were found to be higher for all height items and smaller for size, thickness and width items. The result of the Glycemic index analysis showed that the body type of women in their 20s was generally larger than that of women in their 30s-40s. In addition, women in their 20s had a large drop value compared to those in their 30s-40s, whereas flatness of body cross section was bigger in the group of women in their 30s-40s. Four factors related to the lower body type of female adults in their 20s-40s were identified in the factor analysis, and three categories of body type were identified by cluster analysis. A Type 1 individual had abdominal obesity and chubby lower limbs, Type 2 had short legs and slightly chubby lower limbs, and Type 3 had long legs and a skinny lower body. A significant number of women in their 30s-40s were included in the Type 1 group, which was the least common category for women in their 20s.

  • PDF

도재 전용액이 지르코니아 코어-도재 비니어의 전단결합강도에 미치는 영향 (Effect of modeling liquid on the shear-bond strength of zirconia core - porcelain veneer)

  • 최병환;김임선
    • 대한치과기공학회지
    • /
    • 제36권2호
    • /
    • pp.83-89
    • /
    • 2014
  • Purpose: This study is to evaluate the effect of modeling liquid on the shear-bond strength between zirconia core and veneering ceramic. Methods: Disk-shaped (diameter: 12.0mm; height: 3.0mm) zirconia were randomly divided into six groups according to the surface conditioning method and whether modeling liquid is used or not to be applied (N=60, n=10 per group): group 1-control group with distilled water(ZD); group 2-control group with modeling liquid(ZM); group 3-airborne particle abrasion with $110-{\mu}m$ $Al_2O_3$(AD) with distilled water; group 4-airborne particle abrasion with $110-{\mu}m$ $Al_2O_3$ with modeling liquid(AM); group 5-liner with distilled water(LD); group $6{\pounds}{\neq}liner$ with modeling liquid(LM). Contact angles were determined by the sessile drop method at room temperature using a contact angle measurement apparatus. The specimens were prepared using dentin veneering ceramics, veneered, 3mm high and 2.8mm in diameter, over the cores. The shear bond strength test was performed in a Shear bond test machine. Load was applied at a cross-head speed of 0.50mm/min until failure. The fractured zirconia surfaces were evaluated by using stereomicroscope (${\times}30$). Collected data were analyzed using SPSS(Statistical Package for Social Sciences) Win 12.0 statistics program. Results: ZD showed the highest contact angle($50.6{\pm}5.4^{\circ}$) and LD showed the lowest value($6.7{\pm}1.3^{\circ}$). Control groups and zirconia liner groups were significantly higher contact angle than liner groups(p<0.05). LD was the highest shear bond strength($43.9{\pm}3.8MPa$) and ZD was the lowest shear bond strength($24.8{\pm}4.9MPa$). Shear bond strengths of control groups and contact angle of liner groups were not significantly different((p>0.05). Liner groups presented adhesive failures. The others groups showed cohesive and adhesive failures. Conclusion: Modeling liquid groups showed lower contact angles and lower shear bond strength compared to those of distilled water groups.

쿡췰(Cook/Chill)시스템을 이용한 고등어조림의 HACCP 레시피 개발 및 생산과정의 품질평가 (The Development of HACCP-Based Standardized Recipe and the Quality Assessment of Cook/Chilled Soy Sauce Glazed Mackerel)

  • 곽동경;이경은;박혜원;류경;홍완수;최은정;장혜자;김성희
    • 한국식품조리과학회지
    • /
    • 제13권5호
    • /
    • pp.592-601
    • /
    • 1997
  • The purposes of this study were to develop Hazard Analysis Critical Control Point-based standardized recipe applicable to cook/chilled soy sauceglazed mackerel and to evaluate the qualities related to the product flow of this item. After conducting experimental cooking, preliminary test, and analysis of recipes, critical control points were identified, control methods were determined, and HACCP-based recipe was standardized. At each critical control point, time-temperature profile was recorded and microbiological analysis (total aerobic plate counts, psychrotrophic plate count, coliform, and fecal coliform count), chemical analysis (pH, acid value and volatile based nitrogen (VBN)) and sensory evaluation of the item were done. Time-temperature data showed that the time the menu item had passed through temperature danger zone (5∼60$^{\circ}C$) during all phases was 60 min. At rapid cooling, but after cooling at room temperature, the temperature of this menu item did not drop below the ambient temperature. The results of microbiological test were negative throughout all phases following cooking and the results of chemical analysis did not change significantly in terms of storage periods except for VBN which increased on 7th day significantly(p<0.05). After steam/convection oven reheating and microwave oven reheating, the sensory score of the only appearance decreased significantly related to the storage time of overall quality profiles. But significant differences were not detected according to two reheating methods. In conclusion, this HACCP-based recipe was considered as an effective tool for assuring microbial as well as sensory quality of this cook/chilled item.

  • PDF

공간용도별 위험등급기반의 스프링클러헤드 성능 설계기법의 국내적용 연구 (A Study on Introduction to Performance based Design of Sprinkler Installation on Risk Level for Individual Occupancy in Korea)

  • 이영재;박형주
    • 한국화재소방학회논문지
    • /
    • 제26권2호
    • /
    • pp.1-10
    • /
    • 2012
  • 선진국에서는 다양한 건축용도의 위험등급을 분류하여 해당 위험등급의 수준에 적합한 방수패턴을 가진 스프링클러의 방수규격을 기준으로 용도별 위험등급 기반의 성능설계를 실시하고 있는 반면에, 국내에서는 건축공간용도의 거주밀도나 화재하중밀도가 표준화하고 있지 않아 위험등급조차 설정하지 않은 채 균일한 방수패턴을 가진 표준형 스프링클러 헤드를 일률적으로 적용하고 있는 실정이다. 이런 실정으로 인해 국내에서는 스프링클러의 방수패턴에 대한 요구사양이 다양하게 필요하지 않아 선진국과 같이 다양한 방수상수를 가지면서 방호면적을 달리하는 다양한 종류의 헤드 개발이 이루어지지 않고 있는 실정이다. 그러므로 국내의 주요 건축공간용도에 대한 화재하중밀도를 조사하여 표준 값을 제시하고 영국 LPC나 미국 NFPA에서 정하고 있는 위험등급별로 분류한 결과 크게 다르지 않음을 발견하였다. 따라서 공간용도별 위험등급 기반의 성능 설계를 우리나라에서 적용하기위한 기초적인 토대를 마련하고 국내 스프링클러 헤드개발환경을 개선하기 위한 오리피스와 방수상수를 다양화함으로써 특수한 고위험공간용도에서 효과적으로 적용 가능한 라지 드롭형, ELO형, 또는 ESFR형 등의 스프링클러 헤드 개발을 촉진하도록 유도하였다. 결론적으로 위험등급별로 다양하게 적용되는 스프링클러 헤드를 체계적으로 분류하여 국내 건축용도에 적용 가능한 최적의 방수패턴에 대한 기본사양을 정립하여 제시하였다.

중환자실 내 병원성 폐렴 치료를 위한 Piperacillin/Tazobactam의 용량에 따른 효과와 안전성 비교 (Comparison of Piperacillin/Tazobactam Dosing (13.5 g/day vs. 18 g/day) for the Treatment of Hospital-Acquired Pneumonia and Ventilator-associated Pneumonia in Intensive Care Unit)

  • 강정은;이경아;김재송;김수현;손은선
    • 한국임상약학회지
    • /
    • 제28권3호
    • /
    • pp.167-173
    • /
    • 2018
  • Background: In July 2016, the Infectious diseases society of america and the american thoracic society (IDSA & ATS) published a guideline recommending piperacillin/tazobactam (Pip/Tazo) 18 g/day as the anti-pseudomonal dose for the treatment of pathogenic pneumonia. After the guideline was published, the Pip/Tazo dose used for the treatment of pathogenic pneumonia was changed from 13.5 g/day to 18 g/day in a superior general hospital intensive care unit (ICU). In this study, we analyzed the effectiveness and safety of the new dose. Methods: Adult patients aged ${\geq}19years$ who were diagnosed with pneumonia in ICU and who received Pip/Tazo for 7 days or more from September 1, 2015 to May 31, 2017 were included in the study. The electronic medical record (EMR) was retrospectively analyzed. Results: At baseline, there was a significant difference between 44 patients treated with 13.5 g/day and 31 patients treated with 18 g/day of Pip/Tazo. The 18 g/day-treatment group comprised more elderly patients than the 13.5 g/day-treatment group (p=0.028). The results of the treatment-effects analysis showed no significant difference between the two groups. In case of safety data, there were significant differences in two parameters related to blood count, namely hemoglobin (p=0.016) and platelet count (p=0.011). Conclusion: Based on the significant difference in baseline age, there is a possibility that high-dose Pip/Tazo showed improved therapeutic effect. However, when high-dose Pip/Tazo was used, the blood cell count was found to drop from the reference value more frequently. Therefore, blood cell count should be monitored carefully when high-dose Pip/Tazo is administered.

움직임 벡터와 참조 프레임간의 거리를 이용한 고속 다중 참조 프레임 움직임 추정 (Fast Multi-Reference Frame Motion Estimation Algorithm Using a Relation of Motion Vector with Distance of Each Reference Frame)

  • 변주원;최진하;김재석
    • 대한전자공학회논문지SP
    • /
    • 제47권2호
    • /
    • pp.69-76
    • /
    • 2010
  • 본 논문에서는 새로운 고속 다중 참조 프레임 움직임 추정 알고리즘을 제안한다. 제안된 알고리즘은 참조 프레임간의 거리와 움직임 벡터 간의 선형 관계를 이용하여 검색영역을 줄인다. 새로운 알고리즘은 0번 참조 프레임과 1번 참조 프레임에서는 전영역 움직임 추정을 사용한 후, 2번 참조 프레임, 3번 참조 프레임, 4번 참조 프레임에서는 0번 참조 프레임과 1번 참조프레임에서의 움직임 추정의 결과를 사용하여 검색 영역을 최소화 한다. 제안된 알고리즘은 문턱값을 사용하지 않기 때문에 하드웨어 구현과 프로세싱 스케줄을 지정하는 것이 용이하고 많은 연산량을 줄일 수 었다. 이러한 몇 가지 특징으로 인하여 제안된 알고리즘은 다중 참조 프레임 움직임 추정기의 하드웨어 구현에 용이하다. 시뮬레이션 결과는 제안된 알고리즘의 PSNR 감소와 bitrate의 증가가 기존의 고속 다중 창조 프레임 움직임 추정 알고리즘에 비해서 좋은 성능을 나타내고 있고, 연산량은 기존의 5장의 참조 프레임을 사용하는 전영역 검색 방법에 비해서 52.5%의 감소를 나타낸다.