• 한국운동역학회지
• /
• 제25권1호
• /
• pp.49-56
• /
• 2015

Objectives : The purpose of this study was to present quantitative data and basic references to decrease the accident risk of soccer instructors. Methods : To obtain data, we conducted an investigation on how H/Q ratio affects the dynamic stability of the lower extremity at the time of drop landing. The study targeted 13 soccer players from C University who have not had any injuries or wounds in the lower extremity joints and in any other parts of their bodies over the last 6 months. By using CMIS (USA), the players were divided into two groups according to H/Q ratios higher and lower than 69%, respectively. The subjects in each group were instructed to perform a drop landing. Results : The H/Q ratio did not affect the maximal flexion angle of the knee joints at the time of drop landing. In addition the dominant group with a relatively high H/Q ratio was observed to have increased time to reduce shock and to efficiently absorb the ground reaction force during drop landing. Also, the dominant group with a relatively high H/Q ratio utilized the strong performances of the antagonistic muscles around the hamstrings and the controlled rotatory powers of the thighs that were applied to the tibias supported by the ground. Finally, H/Q ratio, load factors, and mean and maximum EMG were significantly negatively related, whereas GRFx showed a positive relationship. In fact, these factors all affected the impact of the load from the H/Q ratio to the knee joints. Conclusion : From these findings it can be concluded that unbalanced H/Q ratio can be considered as a predictor of knee joint injury at the time of drop landing.

• 한국산학기술학회논문지
• /
• 제17권7호
• /
• pp.641-647
• /
• 2016

피에조 DOD(drop-on-demand) 잉크젯 프린팅 방식은 다양한 종류의 잉크를 사용할 수 있기 때문에 최근에 첨단 산업에 적용이 활발히 연구되고 있다. 피에조 잉크젯 헤드에서 토출되는 액적의 형성 과정을 VOF(Volume-of-Fluid) 기법을 이용한 전산해석으로 예측하고 이를 측정결과와 비교하였다. 작동유체는 에틸렌 글리콜 50%와 IPA(Isopropil alchol) 50%의 혼합액을 사용하였다. 노즐 출구에서 메니스커스 변위의 시간에 따른 변화를 직접 측정하여 노즐 입구의 속도분포를 예측하고 이를 해석의 초기조건 입력자료로 사용하였다. 측정치와 해석치를 비교한 결과 전산해석이 측정치의 액적 형성 과정을 잘 예측함을 알 수 있었다. 주액적 형성과정보다 위성액적 형성과정 예측에 오차가 약간 컸는데, 이는 정지중의 공기에 큰 질량의 주액적이 날아가는 것을 예측할 때는 해석오차가 적지만 주액적에 의해서 주변 공기 유동이 활발해진 상태에서 적은 질량의 위성액적이 날아가는 것을 예측할 때는 해석오차가 상대적으로 커지기 때문이다. 또한 에틸렌 글리콜과 IPA의 혼합 비율을 달리하여 물성치를 변화시킨 다른 잉크에 대해서도 잉크 액적 형상을 예측한 결과 실험 결과를 비교적 정확히 예측할 수 있었다.

• 에너지공학
• /
• 제22권2호
• /
• pp.120-127
• /
• 2013

본 연구는 예혼합 연소시스템에 적용할 직교류 엇갈림 배열 열교환기의 열전달 및 압력강하 특성 검토를 목적으로 한다. 따라서 비예혼합화염보다 화염길이가 짧고 당량비 조절을 통해 NOx 및 CO 배출을 제어할 수 있는 예혼합방식의 버너 앞에 모듈로 구성된 열교환기를 설치한 후 당량비를 변화시킬 때 NOx와 CO의 배출특성을 검토하였다. 또한 열교환기의 모듈 변화에 대한 유용도, 엔트로피 생성량 및 압력강하를 계산하였고 엑서지 로스를 검토하여 열교환기의 성능을 분석하였다.

• 대한기계학회논문집B
• /
• 제23권5호
• /
• pp.637-645
• /
• 1999

Horizontal two-phase flow pressure drop within rectangular channels with small gap heights have been examined experimentally. The gap heights range from 0.4mm to 4mm corresponding to aspect ratios(the channel height divided by the width) from 0.02 to 0.2. Water and air were used as the test fluids with the superficial velocity ranges being 0.03-2.39m/s and 0.05-18.7m/s, respectively. The experimental results In rectangular channels were compared with the Lockhart-Martinelli correlation, which are widely used for conventional round tube. The Lockhart-Martinelli correlation turned out to be Inappropriate to represent the present experimental data. In this respect, considering the aspect ratio and gap-height effects, an empirical correlation on two-phase flow pressure drop was proposed. The proposed correlation successfully covers the bubbly, plug, slug and annular flow regimes.

• 한국안전학회지
• /
• 제30권1호
• /
• pp.8-13
• /
• 2015

The experimental design methodology was applied in the drop tube furnace (DTF) to predict the various combustion properties according to the operating conditions and to assess the coal plant safety. Response surface method (RSM) was introduced as a design of experiment, and the database for RSM was set with the numerical simulation of DTF. The dependent variables such as burnout ratios (BOR) of coal and $CO/CO_2$ ratios were mathematically described as a function of three independent variables (coal particle size, carrier gas flow rate, wall temperature) being modeled by the use of the central composite design (CCD), and evaluated using a second-order polynomial multiple regression model. The prediction of BOR showed a high coefficient of determination (R2) value, thus ensuring a satisfactory adjustment of the second-order polynomial multiple regression model with the simulation data. However, $CO/CO_2$ ratio had a big difference between calculated values and predicted values using conventional RSM, which might be mainly due to the dependent variable increses or decrease very steeply, and hence the second order polynomial cannot follow the rates. To relax the increasing rate of dependent variable, $CO/CO_2$ ratio was taken as common logarithms and worked again with RSM. The application of logarithms in the transformation of dependent variables showed that the accuracy was highly enhanced and predicted the simulation data well.

• 대한기계학회논문집B
• /
• 제34권5호
• /
• pp.471-479
• /
• 2010

다른 세장비에 따른 단일 사각 마이크로 채널 내의 이상유동연구를 수행하였다. 본 연구에서는 대략 넓이가 $500\;{\mu}m$ 이며 수력직경이 각각 490, 322, $143\;{\mu}m$ 인 사각 마이크로채널 내에서의 물-질소 유동에 대한 실험이 수행되었다. 또한, 고속카메라와 장거리 현미경을 통해 이상유동양식을 가시화하였다. 본 연구는 이상유동 중 기포류에 중점을 두었으며 가시화 결과를 통해 기포의 속도, 기포의 길이, 관 내 기포의 개수, 기공률을 산출하였고 단위 셀 모델을 기반으로 늘어진 단일 기포의 압력강하를 해석하였다. 실험을 통해 기포의 속도, 기공률, 단일 기포의 압력강하가 각각 겉보기 속도와 체적건도, 세장비와 연관이 있음을 확인하였으며, 사각 마이크로 채널 내 늘어진 단일 기포의 압력강하에 대한 상관식을 개발하였다.

• 한국전문물리치료학회지
• /
• 제30권1호
• /
• pp.68-77
• /
• 2023

Background: The weakness of the gluteus medius (GM) is associated with various musculoskeletal disorders. The increasing GM activity without synergistic dominance should be considered when prescribing pelvic drop exercise (PD). Isometric hip extension or flexion of the non-weight bearing leg using thera-band at the ankle during PD may influence hip abductor activities. Objects: To determine how isometric hip extension or flexion of the non-weight bearing leg using thera-band at the ankle during PD influences the activities of three subdivisions of GM (anterior, GMa; middle, GMm; posterior, GMp), tensor fasciae latae (TFL), contralateral quadratus lumborum (QL), and GMp/TFL, GMm/QL activity ratios in patients with GM weakness. Methods: Twenty-three patients with GM weakness were recruited. Three types of PD were performed: PD, PD with an isometric hip extension of the non-weight bearing leg (PDE), and PD with an isometric hip flexion of the non-weight bearing leg (PDF). Surface electromyography (SEMG) was used to measure hip abductor activities. One-way repeated-measures analysis of variance was used to assess the statistical significance of muscle activities and muscle activity ratios. Results: GMa, GMm, and GMp activities were significantly greater during PDF than during PD and PDE (p < 0.001, p = 0.001; p = 0.001, p = 0.005; p = 0.004, p = 0.004; respectively). TFL activity was significantly greater during PDE than during PD and PDF (p < 0.001, p < 0.001, respectively). QL activity was significantly greater during PDF than during PD (p = 0.003). GMp/TFL activity ratio was significantly lower during PDE than during PD and PDF (p = 0.001, p = 0.001, respectively). There were no significant differences in the GMm/QL activity ratio. Conclusion: PDF may be an effective exercise to increase the activities of all three GM subdivisions while minimizing the TFL activity in patients with GM weakness.

• 대한환경공학회지
• /
• 제22권4호
• /
• pp.639-650
• /
• 2000

여과집진장치의 중요 문제점 중의 하나인 높은 압력손실을 해결하기 위해 하부유입식 원심 여과집진장치의 특성을 실험적으로 분석하는 것이 본 연구의 주목적으로, 실험은 원심 여과집진장치의 집진효율과 압력손실(특히, 여과포 압력손실) 특성을 일반 여과집진기와 비교 분석하기위해 유입유속, 유입농도 및 선회영역의 변화 등과 같은 다양한 파라메터들에 대해 수행하였다. 실험 결과, $1{\mu}m$ 이하의 서브마이크론 입자들에 대해서 접선유입식이 중앙유입식의 경우 보다 높은 집진효율을 보였으며, 총괄집진효율은 99% 이상을 나타내었다. 유입농도 $100mg/m^3$에서, 압력손실 감소율은 유입유속에 따라 large bag의 경우 15~38%인 반면, small bag의 경우 선회영역의 증가에 의해 30~48%이었다.

• Earthquakes and Structures
• /
• 제19권3호
• /
• pp.189-196
• /
• 2020

The near-collapse performance limit is defined as the deformation at the 20% drop of maximum base shear in the decreasing region of the pushover curve for ductile framed buildings. Although monotonic pushover analysis is preferred due to the simple application procedure, this analysis gives rise to overestimated results by neglecting the cumulative damage effects. In the present study, the acceptabilities of monotonic and cyclic pushover analysis results for the near-collapse performance limit state are determined by comparing with Incremental Dynamic Analysis (IDA) results for a 5-story Reinforced Concrete framed building. IDA is performed to obtain the collapse point, and the near-collapse drift ratios for monotonic and cyclic pushover analysis methods are obtained separately. These two alternative drift ratios are compared with the collapse drift ratio. The correlations of the maximum tensile and compression strain at the base columns and beam plastic rotations with interstory drift ratios are acquired using the nonlinear time history analysis results by the simple linear regression analyses. It is seen that these parameters are highly correlated with the interstory drift ratios, and the results reveal that the near-collapse point acquired by monotonic pushover analysis causes unacceptably high tensile and compression strains at the base columns, as well as large plastic rotations at the beams. However, it is shown that the results of cyclic pushover analysis are acceptable for the near-collapse performance limit state.

• Korean Chemical Engineering Research
• /
• 제47권4호
• /
• pp.512-517
• /
• 2009

순산소 연소에서 $SO_2$ 농도는 배가스의 재순환으로 인해 기존의 공기연소에 비해 3배 이상 높게 나타나고, $CO_2$ 농도와 $SO_2$ 농도가 높기 때문에 탈황현상이 기존의 공기 연소와는 다르게 나타난다. 본 연구에서는 순산소 연소조건에서 로내탈황 특성을 알아보기 위해 Drop Tube Furnace(DTF)를 이용하여, 반응온도, 유입 $SO_2$ 농도 그리고 Ca/S 비 등의 운전변수에 따른 $SO_2$ 제거효율을 측정하였으며 수분의 영향에 대해서도 알아보았다. 반응온도, 유입 $SO_2$ 농도 그리고 Ca/S 비가 증가함에 따라 $SO_2$ 제거효율은 증가하였고 유입가스 내 수분이 존재할 경우 $SO_2$ 제거효율은 약 4~6% 증가하는 것으로 나타났다.