• Nuclear Engineering and Technology
• /
• v.53 no.6
• /
• pp.1878-1886
• /
• 2021

For industrial package (IP)-type transport containers for radioactive materials, a free drop test should be conducted under regulatory conditions. Owing to various uncertainties observed during the drop test, errors in drop angles inevitably occur. In IP-type metal transport containers in which the container directly impacts onto a rigid target without any shock absorbing materials, the error in the drop angle due to a slight misalignment makes a significant difference from the ideal drop. In particular, in a vertical drop, the error in the drop angle causes a strong secondary impact. In this paper, a numerical method is proposed to estimate the error in the drop angle occurring during the test. To determine this error, an optimization method accompanying a computational drop analysis is proposed, and a surrogate model is introduced to ensure calculation efficiency. Effectiveness of the proposed method is validated by performing the verification and comparison between the test and the analysis applied with the drop angle error.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2B
• /
• pp.203-209
• /
• 2004

In OBS networks, the burst dropping due to contention significantly affects the performance of TCP, but existing drop policies have not considered this problem and researches related to TCP have been mainly studied on burst assembling. We propose the drop policy considering retransmission of TCP to improve the performance of TCP in OBS networks. The proposed drop policy is the Retransmission Count-based DP that regards retransmission count of bursts as priority when it selects dropping burst. This paper evaluates the performance of RC-based DP model and general DP model using ns-2. The metrics of performance evaluation are TCP throughput, maximum sequence number of received TCP packets and drop rate of packet as simulation time increases.

• Journal of ILASS-Korea
• /
• v.5 no.3
• /
• pp.37-44
• /
• 2000

High velocity, gas-assisted liquid drop trajectories were investigated under well-controlled experimental conditions at elevated gas densities and room temperature. A monodisperse stream of drops which are generated by a vibrating-orifice drop generator were injected into a transverse high velocity gas stream. The gas density and air jet velocity were adjusted independently to keep the Weber numbers constant. The Weber numbers studied were 72, 148, 270, 532. The range of experimental conditions included studied the three drop breakup regimes previously referred as bag, stretching/thinning and catastrophic breakup regimes. High-magnification photography and conventional spray field photographs were taken to study the microscopic breakup mechanisms and the drop trajectories in high velocity gas flow fields, respectively. The parent drop trajectories were affected by the gas density and the gas jet velocities and do not show similarity with respect to the either Weber or the Reynolds number, as expected.

• Journal of the Korean Ceramic Society
• /
• v.33 no.12
• /
• pp.1325-1330
• /
• 1996

A new numerical method for determining the surface tension of a liquid drop by experimental measurement of the contour of the sessile drop is explained. in the present method a very simple and short computer program enables the calculation of surface tension in a few seconds even by a low speed personal computer. It need not the use of any other numerical tables or complex techniques. X and Z-corrdinates at one point on the contour of a sessile drop and the tangential angle at that point are all the data needed when the density of the drop is known. The results were compared with the values derived by a conventional method. This method can be used for the confirmation of measuring accuracy. Also the same concepts can be applied for the pendant drop method by changing only the sign of Z-coordinate from "+" to "-"ot; to "-"ot;-"quot.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10c
• /
• pp.1-3
• /
• 2003

OBS망에서 버스트의 충돌로 인한 버스트의 drop은 TCP의 성능에 중요한 영향을 끼치나, 기존의 drop policy에서는 이를 고려하지 않으며 TCP에 대한 연구로는 버스트의 assembling이 주를 이루고 있다. 본 논문에서는 OBS망에서 TCP의 재전송 문제를 drop policy와 연계하여 그 성능을 향상시키고자 한다. 본 논문에서 제안하는 drop policy는 버스트의 재전송 횟수가 더 작은 버스트를 drop시키는 TCP 기반 DP이다. TCP 기반 DP 모델과 일반적인 DP 모델의 성능을 ns­2를 이용한 시뮬레이션을 통해 평가하며, 이 때 시간의 변화에 따른 TCP throughput과 패킷의 drop rate을 비교 분석한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2019.05a
• /
• pp.464-466
• /
• 2019

CNN 은 합성곱 연산을 사용하는 인공신경망의 한 종류이다. 이러한 인공 신경망에서는 훈련 데이터에 대한 과도한 학습으로 인해 시험 데이터에 제대로 반응하지 못하는 오버피팅이 발생할 우려가 있다. 이를 해결하기 위해 DropOut 과 DropConnect 를 사용할 수 있다. 본 논문에서는 DropOut 과 DropConnect 를 통한 학습 정도를 실험을 통해서 비교해보고, 인공 신경망에서 이 방법의 효과를 살펴본다.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.1 no.1
• /
• pp.55-60
• /
• 2009

Drag&Drop mechanism was formerly the clipboard of Microsoft Windows. Drag&Drop means that copy and paste functions using the clipboard are processed by a mouse event. The touch interface come info the spotlight not to speak of PCs, laptops and mobile phones. Mouse and touch interfaces make an environment to work easier and intuitive through visible interactions. In this paper, we implemented a web image collector to utilize Drag&Drop. And we proposed the how to apply and a utilizable plan from it.

• Journal of Biosystems Engineering
• /
• v.21 no.1
• /
• pp.44-51
• /
• 1996

The purpose of this paper is to obtain the basic data for design of pressure cooling system. Static pressure drop, as a function of superficial velocity, was measured for different stacking methods and stacking heights of some fruits and vegetables. At given superficial velocity, sphericity and void fraction had a much greater influence on static pressure drop than average diameter of spherical fruits such as apple, peach, tomato and kiwi fruit. Among cylindrical vegetables such as cucumber, carrot, radish and chinese cabbage, cucumber showed different pattern of static pressure drop because of its bended shape, radish showed less static pressure drop than other vegetables because its large sizes of voids. When cucumber and spinach were stacked vertically and horizontally to air flow, a much greater static pressure drop was shown in vertical than in horizontal type, therefore static pressure drop was affected not only by void fraction but also by void shape. Also, in packed-beds of fruits and vegetables, static pressure drop could be estimated very well by Ramsins equation.

• Journal of Welding and Joining
• /
• v.27 no.1
• /
• pp.59-64
• /
• 2009

In order to determine the One-Drop One-Pulse(ODOP) condition of the pulsed gas metal arc(GMA) welding, the drop detaching phenomenon during the peak time is investigated using the force-displacement model. The drop detaching criterion is established based on the displacement of the pendant drop, and the forces exerted on the drop are calculated using the Modified Force Balance Model(MFBM). The effects of wire melting on the drop size and force are included in the force-displacement model. While the peak current has most significant effects on the drop detaching time, the initial drop mass prior to the peak time also influences drop transfer. The calculated results show good agreements with the experimental data, which implies that the ODOP condition can be predicted using the force-displacement method.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2568-2573
• /
• 2008

A drop impact on the liquid film/pool generates several phenomena such as the drop floating, bouncing, formation of vortex ring, jetting, bubble entrapment and splashing. These phenomena depend on the impact velocity, the drop size, the drop properties and the liquid film/pool thickness. These parameters can be summarized by four main dimensionless parameters; Weber number, Ohnesorge number, Froude number and non-dimensional film/pool thickness. In the present study, the phenomena of the splashing and bubble entrapment due to the drop impact on the liquid film/pool were numerically investigated by using a Level Set method for the sharp interface tracking of two distinct phases. After the drop impact, the splashing phenomena with the crown formation and spreading were predicted. Under the specific conditions, the bubble entrapment at the base of the collapsing cavity due to the drop impact was also observed. The numerical results were compared to the available experimental data showing good agreements.