• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.874-876
• /
• 2001

This paper proposes a new driving scheme for single-phase SRM. The driving scheme is very simple and inexpensive. By use of this scheme, simple power devices based on low switching losses enable to high efficiency SRM drive. Starting, one of the main problem in single-phase SRM is overcome 2 using a parking magnet. This drive system has a high efficiency and robust drive characteristics compared to that of a universal motor.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.1159-1160
• /
• 2008

For safety railway vehicle movement, analysis and recoding of railway vehicle speed and driving information has written by law. nowadays, base in europe, these system is spread of various advanced country. In this paper, We implement an event recorder which record the driving and breaking information of running railway vehicle. For the event recorder, We designed the data structures with data analysis tools and a protocol between Event recorder and data analysis tool. The verification of Analysis tool was tested by to made data by Event Recorder's emulator and information of real railway driving recording.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.23 no.58
• /
• pp.71-79
• /
• 2000

In this study, through the roadside interview, drivers'feeling about fatigue has been evaluated synthetically and systematically when they drive a vehicle according to their sex, vehicle type, driving career, etc. Also, with the human sensibility evaluation technique, we grasped the human sensibility structure for the fatigue in a vehicle and as an objective evaluation index for comfort and fatigue in a vehicle, we developed a sensibility database. Through the survey and research, extracting and understanding the importance of factors which have influence on the fatigue in driving can be used as basic data that can suggest more comfort and pleasant driving environment to drivers. Also, human sensibility database regarding to the comfort and fatigue in a vehicle can be used as basic data in ergonomic vehicle design, evaluation for seat , comfort seat development, development of vibration reduction method and so on.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.211-215
• /
• 2004

This paper describes the result of structure analysis and load test of torque arm for driving gear unit. The purpose of the analysis and test is to evaluate an safety which torque arm shall be considered fully sufficient rigidity so as to satisfy proper system function under maximum load. Driving gear unit consist of gearbox and torque arm. Both components, torque arm is significant component subjected to the vehicle and motor loads. The evaluation methode is used the FEM analysis, static and fatigue test. The test results have been very safety and stable for design load conditions.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.12
• /
• pp.8-14
• /
• 2015

An effective way to ensure that LEDs produce wanted light output is to use a current driving topology, because the brightness of LEDs is directly related to their current. However, this topology may lead to the lifetime shortening of a illumination system because over-currents may flow through non-damaged LEDs in case some LEDs are damaged. This paper presents an adaptive current control circuits for LEDs, which protect LEDs in a good state by limiting the driving currents according to the number of damaged ones. The proposed control circuits consist of a simple constant-current driver and a micro-controller which monitors the voltage of LED array without any auxiliary current sensors for fault diagnosis. And the driving current is automatically controlled into 6-levels according to the number of failures.

• Journal of Astronomy and Space Sciences
• /
• v.27 no.2
• /
• pp.135-144
• /
• 2010

In this paper, we present the result of preliminary design of tracking mount for ARGO-M which is a movable satellite laser ranging (SLR) system developed by Korea Astronomy and Space Science Institute (KASI). The tracking mount consists of a couple of core parts such as driving motors, encoders and bearings, and the requirements of each parts are determined on the basis of the technical consideration. 2D and 3D models for tracking mount were preliminarily designed using the selected core parts. In order to evaluate the validity of the preliminarily design, the simulator to test the elevation axis was designed and manufactured. The test to check the tracking performance and system accuracy of the simulator was performed, and it was confirmed that the preliminary design meets the operating specifications. Additionally, it was found that the repetitive errors and hysteresis errors need to be improved by the additional control algorithm.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.3
• /
• pp.81-86
• /
• 2006

This paper deals with a driving current fault monitor design methodology for a DDV actuation system which has a dual hydraulic power supply system, and triplex electric control capability. A fault existing among these redundant channels should be detected accurately and removed timely, and the remaining channels are to be reconfigured in order to compensate the role of a removed faulty channel. An integrated analysis on the aerodynamics, flight control laws, and DDV actuation system is essential for the design of an actuation system fault monitor. A method to define a fault transient boundary which specifies a maximum travel of an actuation system caused by the first faulty operation is proposed based on the top level requirement on the fault effect specified in MIL-F-8785C.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.5 no.2
• /
• pp.29-37
• /
• 2009

Recently, the structure of simulation environment is important issue in all fields. In case of the training for operating the machines which are costly such as airplanes or spaceships, simulators could be helpful for decreasing the costs and training effects by simulating real situation. When we get the driving license, too many peoples are waiting for their turns because of limited cars and testing spaces in Korea. To solve this problem, we've designed and developed the basic design for the simulators. We suggested the Computer 3D Simulation Model for practice of a drives's license. The concept of this simulator was from a 3D Racing-game which suit for driving exercise. We provide users with handle-controlled simulation setting in order that users feel reality as if they drive really through this simulator. We also use 'force-feedback' system which give handle vibration in case users collide against obstacles or exceed the line since users can absorb the simulation program and feel the sense for the real. This paper is the study about modeling the driving exercise model made use of 'computer 3D simulation', and producing and utilizing the simulator through this modeling.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.5
• /
• pp.851-858
• /
• 2017

In this study, the voltage control system of a single phase full bridge inverter was designed based on the SPWM driving method. The voltage control system consists of a single-phase full-bridge inverter, a PI controller for linearly compensating the error between the reference voltage and the output voltage, a PWM driving circuit for generating the gate signal using the SPWM method from the controller signal, and an LC filter for filtering the inverter output voltage waveform into sinusoidal waveform. Finally, the voltage control system of a single-phase full-bridge inverter based on the PWM driving method was modeled using EMTP-RV and by showing that the output voltage accurately converges the reference voltage through several simulation examples, the validity of the control system design was verified.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.5
• /
• pp.699-705
• /
• 2009

This paper is represented to research of driving control for the forklift AGV. The related works that were studied about AGV as heavy equipment used two methods which are magnet-gyro and wire guidance for localization. However, they have weaknesses that are high cost, difficult maintenance according to change of environment. In this paper, we develop localization system through sensor fusion with laser navigation system and encoder, gyro for robustness. Also we design driving controller using fuzzy and proportional control. It considers distance and angle difference between forklift AGV and pallet for engaging work. To analyze performance of the proposed control system, we experiment in same working condition over 10 times. In the results, the average error was presented with 54.16mm between simulation of control navigation and real control navigation. Consequently, experimental result shows that the performance of proposed control system is effective.