• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 춘계학술대회 논문집
• /
• pp.431-436
• /
• 2002

Train driving should be satisfied to run fixed distance within given time, and it is desirable to minimize energy consumption. Minimizing energy consumption depends on the train operation modes by driver or automatic operation. In this article, an optimal operation to minimize energy consumption by changing modes of train operation by a driver is investigated. First, powering model, braking model and consumed energy calculation model are introduced by using Matlab software. The accuracy of the model established by simulation is compared with the real experimental data, which is obtained from an authorized institution. Second, several simulations under a variety of operations in the ideal track are executed, and then the optimal pattern of train driving is found.

• 한국기계가공학회지
• /
• 제16권4호
• /
• pp.69-75
• /
• 2017

In this study, the performances of five input split type hybrid electric vehicle sub-drivetrains were analyzed. The five sub-drivetrains consist of chain, helical gears and planetary gears. For the analyzing above five sub-drivetrains, the mathematical equations were derived. From the analysis, we found that the sub-drivetrain with chain shows slower acceleration performance and larger energy consumption on the city driving. And, the sub-drivetrain with only helical gear shows smallest energy consumption on the city driving. If the sub-drivetrain can change its gear speed, it shows fastest acceleration performance, but it has largest energy consumption on the city driving due to its additional auxiliary components.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.498-508
• /
• 2008

경부고속열차 차상컴퓨터 장치의 하부장치로 운전자에게 차량의 정보와 고장의 현시 그리고 유지보수기능 및 훈련기능을 가지고 있는 장치가 TECA (Terminal Cabin)이다. KTX 차량의 운전은 고속화 운전을 위해 신호운전의 필요가 요구되어지며 차량의 장대화 및 일인운전을 통한 차량의 기본정보 취득 및 고장에 대한 조치에 있어 많은 어려움이 있는 것이 사실이다. 이에 대해 차량에서 발생하는 수많은 정보에 대한 신속하고 정확한 처리와 유지보수를 위해 TECA장치는 그 활용에 있어 반드시 필요한 장치이다. 그러나 본 장치에 대한 하드웨어와 유지보수 그리고 새로운 요구에 따른 장치개발에는 연구사례가 없는 실정이다. 이에 운전자지원단말기 장치의 유지보수능력 개발과 장치에 대한 이해를 돕고 장치개발에 필요한 TECA의 기초기능과 요구사항을 하드웨어 중심으로 연구하였으며 이로 인한 새로운 운전자 단말기 장치 개발에 필요한 사양정립에 활용하도록 활용할 수 있으리라 본다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.497-502
• /
• 2002

TGIS(Train General Information System) is monitoring Train status and analyzing fault happened. TGIS informed a lot of Passenger data, Driving data, Status data and Fault data to 'Depot'. For dealing them more properly, TGIS need specified data and specialized data handling method. This paper suggest Optimize data of Train Monitoring System and Apply that to Main Line Car.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.612-618
• /
• 2009

Recently the roles of railways about the prevention of global warming caused by greenhouse gases and for low carbon green growth are larger than ever. And the railroad-related research institutions have been active in researching for energy conservation. Especially the urban railroad has been emerged as the best means of transportation compared to the general public transportation systems in punctuality, stability, ecology and etc. In operating the urban railroad system there are various ways for energy savings. In the larger category, One is the hardware aspect according to the structure of the vehicle and the development of control systems. The other is the software aspect which efficient train operation can be made through control of driving patterns and driving diagram. In this paper, there is sense to analyze the result in verifying expectation relation with variable and the use of electric power on this after selecting main variables that can influence to the energy of the train operation in the software aspect. First, after collecting the basic data related to operation(train speed, operating hours, power consumption, the position of stopping station, electrical power system etc.) and according to this, investigating the consumption of the energy of the operation, in the side of energy consumption deducing and analyzing problem, this will be found solutions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1165_1166
• /
• 2009

In recent years, energy prices have soared, which of course have increased costs for railway operators. Simultaneously, the energy market has considerably changed that in most developed countries, it is deregulated, giving railway operators an opportunity to define new ways of using energy. Efficient operation of the railway system is considered as an essential way to energy saving while an efficient management of power level helps to lower the reference subscribed power, giving access to better energy rates. It is studied on the relation between time and force for the energy efficient driving of train in railway when the train is braking according to several slips.

• 한국기계가공학회지
• /
• 제16권3호
• /
• pp.30-37
• /
• 2017

When a wheel profile of a train-tram is designed, both train and tram tracks should be considered. This study designed a wheel profile that enables high-speed driving(200km/h) on the train track and low speed driving on the tram track with multiple sharp curves. The study used the approximation optimization method to reduce cost and time, used the sequential quadratic programming method as the optimized algorithm, and the central composite design and response surface method as an approximate model. The optimized wheel shape based on this approximation optimization method reduced wear of the initial wheel showed a better performance in terms of derailment and lateral force.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1403-1407
• /
• 2007

The bogie of Rolling Stock is the basic rolling component. It operates the train body, guides the body considering various tracks and offers comfort to passengers. We can verify the safety level of bogie about all factors through the first -grade scenario of Preliminary Hazard Analysis, but especially the horizontal acceleration sensor, equipped in each power bogie and trailer bogie, is the device, which makes it possible to test bogie instability and uncomfortable body movements by the method, similar to actual train driving, and in this context the necessity of this device becomes important. This paper would classify the main functions of driving sub system and examine the reliability, availability, maintainability and safety, which are main factors of RAMS. Especially, we would realize the bogie instability sensor with a simulator and offer the content in analyzing the data by the statistical method, which are obtained through the connected test with OBCS.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 춘계학술대회 논문집
• /
• pp.143-150
• /
• 1999

The vibration signals of driving parts of electric train are distorted its signal patterns due to the impact components, which occurs when wheel passes rail joints. An elimination method of the impact components is investigated using adaptive signal processing technique in this study. The result shows that adaptive interference canceling method seems to be more effective than line enhancement technique. The application of adaptive interference canceling method to the signal measured at bogie shows that the extractions of the signals of driving parts of traction motor, reduction gear, and axle bearing are successful. Therefore, only the signals of bogie, which is the place to attach an accelerometer easily, is sufficient for the fault diagnosis and the safety evaluation of electric train. Also, adaptive interference canceling method can be applicable to evaluate the performance of vibration isolation between bogie and car body and to investigate the characteristics of indoor sound.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1955-1963
• /
• 2008

How can a train move? While a car is driven by a driver who gets the traffic information and takes the road, a train is operated on the designated(or predetermined) track by the operator or the control center. There have been a great deal of changes and evolutions in the railroad environment. Along with these transitions, there have been also a considerable amount of changes in the control center. There has been no detailed analysis for the control center even though its importance has been recognized. It goes without saying that CCC(Central Control Center)'s importance as the core of the train driving system. Such an importance is true for the automated driving system such as the light rail system. Therefore this paper analyzes the CCC of AREX(Airport Express) from the various aspects, i.e., organization, personnel assignment, the way of working, qualification and job analysis for the operator.