• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.3
• /
• pp.3-7
• /
• 2007

There have been numerous studies directed toward the development of driving mechanisms for off-road mobility and rescue robots. To achieve surveillance, reconnaissance, and rescue, it is necessary for robots to have a driving mechanism that can handle off-road environments, We propose a new type of single-track driving mechanism with a variable geometry for a rescue robot, This mechanism has a symmetric configuration so that the robot can advance in two directions and also remain operable when overturned. By transforming its geometry, the robot can reduce energy consumption in steering and rotating as well as maximize its ability to climb obstacles such as stairs. The robot is also designed to have a compact size and low center of gravity to facilitate driving when on a set of stairs. In this paper, we analyzed the design parameters of the robot for the four phases of climbing stairs and determined the specifications needed to enhance its adaptability.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.3
• /
• pp.110-115
• /
• 2005

Driving performance is affected by a steering mechanism and characteristics of the ground at off-road skateboarding. In order to drive on off-road, it is necessary off-road wheel and high performance steering mechanism to adapt on various configuration of the ground. In this paper, design factors are studied to affect to steering radius such as inclination angle of a king-bolt, distance of a wheel axle, and rolling angle of a deck plate. A steering system is adhered to inclination face of the deck plate. And, inclination angle is existed between the king-bolt and the flat face of the deck plate. Therefore, the wheel axle of the steering system can be steered by control of the rolling angle of the deck plate.

• Journal of Drive and Control
• /
• v.20 no.1
• /
• pp.8-15
• /
• 2023

With the recent trend of intelligence and automation of construction work, a double-blade road cutter is being developed that automatically enables cutting along the cutting line marked on the road using a vision system. The road cutter can recognize the cutting line through the camera and correct the driving route in real-time, and it detects the load of the cutting blade in real-time to control the driving speed in case of overload to protect workers and cutting blades. In this study, a vision system mounted on a double-blade road cutter was developed. A cutting route recognition technology was developed to stably recognize cutting lines displayed on non-uniform road surfaces, and performance was verified in similar environments. In addition, a vision sensor protection module was developed to prevent foreign substances (dust, water, etc.) generated during cutting from being attached to the camera.

• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.210-218
• /
• 2021

CNN (Convolutional Neural Network), a type of deep learning algorithm, is a type of artificial neural network used to analyze visual images. In deep learning, it is classified as a deep neural network and is most commonly used for visual image analysis. Accordingly, an AI autonomous driving model was constructed through real-time image processing, and a crosswalk image of a road was used as an obstacle. In this paper, we proposed a low-cost model that can actually implement autonomous driving based on the CNN model. The most well-known deep neural network technique for autonomous driving is investigated and an end-to-end model is applied. In particular, it was shown that training and self-driving on a simulated road is possible through a practical approach to realizing lane detection and keeping.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.5
• /
• pp.188-195
• /
• 2000

This study was conducted to develop the mathematical model and the computer simulation program(TPPMWV) for predicting the tractive performance of off-road wheeled vehicles operated on various soil conditions. The model takes into account main design parameters of a wheeled vehicle, including the radius and width of front and rear tires, the weight of vehicle, wheelbase and driving type(4WD, 2WD). Soil characteristics, such as the peressure-sinkage and shearing characteristics and the response to repetitive loading, are also taken into consideration. The effectiveness of the developed model was verified by comparing the predicted drawbar pulls using TPPMWV with measured ones obtained by field tests for two different driving types of wheeled vehicle. As a results, the drawbar pulls predicted by the TPPMWV were well matched to the measured ones within the absolute errors of 5.25%(4WD) AND 9.42%(2WD)for two different driving types, respectively.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.1
• /
• pp.77-84
• /
• 2015

In 2011, greenhouse gas emissions of transport sector were 85.04 million $tonCO_2eq$ and road emissions accounted for 95% of total emissions in the transport sector. There are few innovative technologies to reduce greenhouse gas emissions aside from eco-driving education and public relation program. Therefore, this paper focused on analyzing optimal acceleration by certain road grades and suggested fuel-efficient driving method for various uphill sections. Scenarios were established by driving modes. Speed profiles were generated by scenarios and speed variations. Each speed profile applied to Comprehensive Modal Emission Model and then each fuel consumption was estimated. Driving mode and speed variation that minimized fuel consumption were driven according to grade percent and uphill distance. When driving in the eco-friendly mode of the driving and speed variation, reduction rate of fuel consumption was evaluated by comparison between eco-driving and cruise control mode. When a vehicle drove under eco-driving mode at 100kph, 90kph and 80kph on uphill road, fuel consumptions were reduced by 33.9%, 30.8% and 5.3%, respectively.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.5
• /
• pp.55-61
• /
• 2005

In this paper, we propose the visual simulation system for virtual reality motion rider system. The visual simulation system can apply verity virtual reality system. This paper deals with programs on 3D automatic creation of terrain, road design, and a realtime rendering program for the virtual reality system. For the 3D automatic creation of terrain, DEM data and rectangular grid method are applied. We can make two different road object with the road design program. One of them includes road definition, and the other is obtained by using 'NURBS curve.' Visual simulation is consisted by additional modeling and real-time rendering. We can apply the programs made in this way to visual system of driving simulator.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2004.04a
• /
• pp.284-288
• /
• 2004

Standardization strategy is considered as an important approach for the organization growth and competitiveness. Major contents of standardization are the selection of standardization area and management of standardization timing under limited resources. The developments of standardization road map and its driving strategy in construction area are important policy subjects in view of investment scale and national economy. In this paper, we aim to survey on the standardization theory and its application in construction field and suggest research direction for driving strategy of standardization road map development.

• Proceedings of the Safety Management and Science Conference
• /
• 2006.04a
• /
• pp.429-436
• /
• 2006

Standardization strategy is considered as an important approach for the organization growth and competitiveness. Major contents of standardization are the selection of standardization area and management of standardization timing under limited resources. The developments of standardization road map and its driving strategy in construction area are important policy subjects in view of investment scale and national economy. In this paper, we aim to survey on the standardization theory and its application in construction field and suggest research direction for driving strategy of standardization road map development.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.3
• /
• pp.135-142
• /
• 2016

Objective: Objective of this study is to provide characteristics of injury frequency and severity by driving condition in large truck-related traffic collisions. Background: Traffic accidents involving large trucks draw a lot of attention in accident prevention and management policies since they bring about severe human and financial damages. Method: In order to identify the major risk factors of accidents by driving condition, 255 recognized traffic accidents by large truck drivers were analyzed in terms of time of the day, road type, and shape of the road. Results: The driving conditions in the results are represented by the following form of combination, "Road Type (Non-expressway or Express) - Shape of Roads (Straight, Curved, Downhill, or Intersection) - Time of Accidents (Day or Night)". In the analysis of injury frequency, Non-expressway-Straight-Day condition was the most frequent one. Meanwhile, Expressway-Curved-Day, Non-expressway-Curved-Night and Non-expressway-Intersection-Night were evaluated as high level in view of injury severity. Also, Expressway-Straight-Night is the driving condition that is the highest in risk among the conditions that have to be managed as grade "High". Non-expressway-Straight-Night, Non-expressway-Downhill-Day, and Non-expressway-Curved-Day are also categorized as grade "High". Conclusion and Application: Safety managers in the fields require basic information on accident prevention that can be easily understood. The research findings will serve as a practical guideline for establishing preventive measures for traffic accidents.