• 한국항공운항학회지
• /
• 제16권2호
• /
• pp.1-11
• /
• 2008

Increasing demand for improved reliability and survivability of mission-critical systems is driving the development of health monitoring and Automated Contingency Management (ACM) systems. An ACM system is expected to adapt autonomously to fault conditions with the goal of still achieving mission objectives by allowing some degradation in system performance within permissible limits. ACM performance depends on supporting technologies like sensors and anomaly detection, diagnostic/prognostic and reasoning algorithms. This paper presents the development of a generic prototype test bench software framework for developing and validating ACM systems for advanced propulsion systems called the Propulsion ACM (PACM) Test Bench. The architecture has been implemented for a Monopropellant Propulsion System (MPS) to demonstrate the validity of the approach. A Simulink model of the MPS has been developed along with a fault injection module. It has been shown that the ACM system is capable of mitigating the failures by searching for an optimal strategy. Furthermore, the concepts of Validation and Verification (V&V) of such systems are introduced with relevant examples.

• 한국전자통신학회논문지
• /
• 제6권5호
• /
• pp.643-648
• /
• 2011

본 연구에서는 공항, 철도, 항만 등 대형 교통수단의 표시등으로 사용하기 위하여 SMPS에 의하여 구동되는 LED 신호등을 설계하고 제작된 LED 신호등의 전기적 특성과 EMI 특성을 조사하였다. 10V 이상의 교류 및 직류입력전압에 대한 출력전류는 1.67A이었다. 0.15~30MHz에서 측정한 잡음단자전압은 허용기준 준첨두치와 허용기준 평균치 보다 낮았으며, 30~1000MHz에서 측정한 잡음전계강도는 59.96MHz에서 $23.96dB{\mu}V/m$이었다.

• Journal of information and communication convergence engineering
• /
• 제11권4호
• /
• pp.247-252
• /
• 2013

An intelligent light emitting diode (LED) dimming system is designed and implemented for energy-saving lighting systems. An LED light bulb is powered by an LED driver controlled by a microcontroller using pulse width modulation (PWM) signals. By changing the duty cycle of the PWM signals, the LED driver generates a driving current of up to 1,000 mA. The current consumption by the LED light bulb exhibits a very linear characteristic that indicates that the level of LED dimming can be finely tuned. Multiple sensors-lighting intensity and ultrasonic range sensors-are combined with the LED dimming system to realize an automatically controllable LED lighting system. The light intensity sensor is capable of sensing ambient light. The ultrasonic range sensor can detect objects from 0.15 to 5.6 m at a resolution of 0.0254 m. The collected information by the light intensity and ultrasonic range sensors is processed by the microcontroller that in turn automatically controls the brightness of the LED light bulb. The algorithm of the software for the LED dimming system is also described.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.228-234
• /
• 2001

NTMS(Non-contact Tilted-angle Measuring System) is developed by using the principle that the magnetic field of an anisotropic magnet's inner space is uniform and it's possible to measure the strength of the magnetic field using a linear hall effect sensor. In order to implement the caliper system of the geometry PIG(Pipeline Inspection Gauge) which has high accuracy and proper output voltage of the hall sensor without additional driving module or a signal amplifier, it is necessary to consider the size of the magnet, the inner space and back-yoke and the position of pin-hole in the magnet. So the optimal design method of the caliper system is proposed through analysis of NTMS's magnetic field adopting a FEM(Finite Element Method). The experimental results show that the developed caliper system can be used for the geometry pig with good performances.

• 전자공학회논문지
• /
• 제54권6호
• /
• pp.123-133
• /
• 2017

본 논문에서는 LED 디스플레이 시스템의 동적인 구동방식에서 LPM 모듈의 구성에 관계없이 휘도구현 비트를 16비트 이내, 휘도 구현 펄스를 512개 이내에서 최적의 플리커 프리 제어 알고리즘을 개발하고 이 알고리즘을 이용하여 디스플레이 제어장치를 구현하였다. 구현방법으로는 완전한 색 표현을 위한 기존의 시프트-래치 방법을 변형하여 여러 번의 시프트-래치를 수행하게 하여 스캔횟수를 늘림으로써 리플레시율을 증가시키는 방법을 사용하였다. 그 결과로 기존의 LED 디스플레이 시스템은 리플레시율이 240~480[Hz]를 수행하지만 제안된 방법을 사용하면 리플레시율을 2,040[Hz] 이상으로 높게 구현할 수 있기 때문에 플리커 현상을 감지할 수 없게 된다.

• 정보통신설비학회논문지
• /
• 제4권1호
• /
• pp.15-21
• /
• 2005

One of the core technology in WDM-PON system is a generation and modulation technique of the optical source in Optical Network Unit (ONU). In this paper, we propose a reflective semiconductor optical amplifier (RSOA) as a modulator in WDM-PON system. Its performance is analyzed by simulation and actual experimentation. Using RSOA in WDM-PON system as a modulator, it obtains higher gain compared to the conventional SOA due to the double pass gain effect. Furthermore RSOA can provide high gain with comparatively low input power. This is very helpful when we set up the actually system because using lower input power, it can reduce the load of the driving circuit which makes very economical module structure. Therefore, when RSOA is used as a modulator, not only it gives noise suppression effect, but also provides certain amount of gain as well. In addition, comparing with conventional SOA which gives fairly large insertion loss, RSOA can provides more important merits.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 추계학술대회
• /
• pp.499-502
• /
• 2011

IT의 발달로 인해 스마트폰의 다양한 기능을 이용하여 차량의 상태를 점검할 수 있게 되었다. 그러나 기존 스마트폰 자동차 진단 시스템은 자동차에 대한 전문적인 지식이 있어야 차량 상태를 알 수 있어 사용자에게 진단기의 필요성이 부각되지 않았다. 이런 불편한 점을 반영하여 스마트폰을 이용해 사용자들이 쉽게 사용할 수 있고 자신의 차량 상태를 한 번에 파악할 수 있는 시스템이 요구된다. 본 연구에서는 OBD-II 프로토콜 변환 와이파이 커넥터를 통해 받아오는 OBD-II 정보를 이용해 자동차 운전자에게 필요한 차량 소모품 교체주기, 차량 문제점 진단, 에코 드라이빙 판단 정보를 사용자에게 실시간으로 자동차 진단 시스템을 윈도우폰에서 설계하였다.

• 한국자동차공학회논문집
• /
• 제23권1호
• /
• pp.74-87
• /
• 2015

A numerical parametric study has been accomplished to figure out the effect of grille shape built in a small passenger car on the aerodynamic performance such as drag and mass flow rate through CRFM(Condenser Radiator Fan Module). Three grille opening parameters and three grille mesh parameters are selected and adopted to a simple shape passenger car model. This research will provide a design guideline for grille opening geometry and mesh shape in the grille. FLUENT, which is very well known commercial code, hires k-${\epsilon}$ turbulence model at the driving speed of 110km/h with moving wall boundary condition. A porous media condition is prepared to estimate the pressure drop amount through CRFM parts.

• 한국안전학회지
• /
• 제29권1호
• /
• pp.7-14
• /
• 2014

Inverter module, which feeds the converted power to the traction motor for EMU. Consists of the power semiconductors with their gate drive unit(GDU)s and the control computer for driving, voltage, current and speed controls. Electrolytic condenser, connected to the gate drive unit and a core component to drive the power semiconductor, has problems such as reduction in lifetime and malfunction caused by electrical and mechanical characteristic changes from heat generation during high speed switching for generation of stable power. In this study, To check the service life of electrolytic condenser, the test was carried out in two ways. First, In the case of accelerated life testing of condenser, the Arrhenius model is a way of life testing. Another way is to analyze the reliability of the failure data by the method of parametric data analysis. Eventually, life time by accelerated life test than a method of failure data analysis(Weibull distribution) was found to be slightly larger output.

• 한국표면공학회지
• /
• 제41권3호
• /
• pp.94-101
• /
• 2008

A new convenient magnet array module is designed to investigate effects of magnetic field array on magnetron discharge characteristics. Magnetic field analysis showed good agreement of measured discharge region by a CCD device which has a high quantum efficiency over visible wavelength range. OES (optical emission spectroscopy) showed major emission peaks are from electronic transitions in 400 nm range and 800 nm range. Effects of driving voltage characteristics were analyzed in a point of electron drift trajectories and ionizing collision frequencies. Pulsed dc with a fast rising and falling time was analyzed to have potential to increase ionization collisions by putting a burst of hot electrons and to raise sheath potential. From measured voltage and current waveform, maximum of -1000 V peak was generated with $-400\;V_{rms}$ conditions. Possibility of a properly designed magnetron cathode was shown to be used as a melting device. Cu was successfully melted with power density of a several tens of $W/cm^2$.