• 한국지능시스템학회논문지
• /
• 제4권2호
• /
• pp.13-23
• /
• 1994

This study proposed a method of accessment for traffic flow on roads based on the driver's decision making. In order to, an attempt is carried out to express driving speeds through driver's congnitive language theoretically and experimentally. Membership function is derived to express driver's congnitive language about driving speed through a fuzzy set theory and examines the applicability for speed evaluation. As a resul, the membership function of the recognized as medium by drivers almost agrees with the frequency distribution of speeds on roads constrtained at 50km/h.

• 한국재료학회지
• /
• 제2권3호
• /
• pp.220-227
• /
• 1992

전기유변유체(electrorheological fluid : ERF)는 크기가 $10^{-6}m$정도를 가진 분극성이 강한 입자 분말을 유전유체속에 혼합하여 만든 콜로이드용액으로서 외부전기 장에 의하여 액체상태로부터 겔(gel)상태로 상태변환을 한다. 상태변환과정은 가역과정이며 $10^{-3}$초 정도의 빠른 시간내에 이루어진다. 본 논문에서는 주기적응력이나 주기적 변형이 가해지는 강제진동실험을 통하여 ERF의 점탄성 특성을 조사하였다. 점탄성은 복소수로서 실수부인 동적전단탄성율(storage shear modulus, G')과 허수부인 동적손실율(loss modulus, G")의 합으로 표현된다. 동적전단탄성율은 강제진동의 진폭과 주파수의 함수로 외부전기장에 의하여 크게 변화되었으나 손실계수(loss factor, ${\eta}=G"/G'$)는 진동의 진폭, 진동수 및 외부전기 장에 거의 독립적이었다. 실험(1)은 강제진동의 진폭을 고정하고 진동수를 변화하는 방법(frequency sweep)과 실험(2)는 진동 진폭을 변화시키는 방법(amplitude sweep)으로 실행했다. 본 실험에서는 cornstarch입자를 corn oil에 혼합한 것과 zeolite입자를 silicone oil에 흔합한 콜로이드 용액이 ERF로서 사용되었으며 인가된 전기장은 약$(1~3){\times}10^6V/m$의 직류전기장이 가하여졌다.기장이 가하여졌다.

• Structural Engineering and Mechanics
• /
• 제63권6호
• /
• pp.761-769
• /
• 2017

Accurately extracting the axle distribution information of a passing vehicle from bridge dynamic responses experiences a key and challenging step in non-pavement bridge weigh-in-motion (BWIM). In this article, the wavelet transformation is adopted and the wavelet coefficient curve is used as a substitute for dynamic response. The driving frequency is introduced and expanded to multi-axle vehicle, and the wavelet coefficient curve on specific scale corresponding to the driving frequency is confirmed to contain obvious axle information. On this basis, an automatic method for axle distribution information identification is proposed. The specific wavelet scale can be obtained through iterative computing, and the false peaks due to bridge vibration can be eliminated through cross-correlation analysis of the wavelet coefficients of two measure points. The integrand function that corresponds to the maximum value of the cross-correlation function is used to identify the peaks caused by axles. A numerical application of the proposed axle information identification method is carried out. Numerical results demonstrate that this method acquires precise axle information from the responses of an axle-insensitive structure (e.g., girder) and decreases the requirement of sensitivity structure of BWIM. Finally, an experimental study on a full-scale simply supported bridge is also conducted to verify the effectiveness of this method.

• 전기학회논문지
• /
• 제58권10호
• /
• pp.1989-1994
• /
• 2009

This study purposes are improvement of system (lamp & ballast) efficacy with and optical characteristics through the developed ceramic arc tube. The designed electronic ballast is substituted for conventional magnetic ballast. These electric signal and optical, thermal characteristics through the improving efficacy of lighting system compared with conventional magnetic ballast. properties of lamp by driving method is researching in ballast. Particularly, electronic ballasts, which improved against weakness of Magnetic Ballast, are researching and applying to control of ceramic metal-halide lamp. but One major limitation is the acoustic resonance problem in CMH lamps at high-frequency operation. In order to avoid acoustic resonance, driving frequency decided 21[kHz]. Before discharge in this paper. The PSpice simulation result obtained sufficient voltage gain and the ignition voltage obtained over 3[kV] at 75[kHz]. After discharge, driving voltage obtained approximately 90[Vrms] at 21[kHz].

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.705-709
• /
• 2004

In this study, the foot-spa driving circuit using ultrasonic vibrator was manufactured The used ultrasonic vibrator was PSN-PMN-PZT ceramic with the radius of $25{\Phi}$ and the thickness of 2, 2.5, 3, 3.5 and 4mm, respectively. Resonent frequency for driving ultrasonic vibrator at the fabricated circuit was generated using the self exciting and the external exciting methods. Fabricated foot-spa showed the best condition at the resonent frequency of 1.130MHz and the ceramic thickness of 2.0mm. That is, when the foot-spa was operated for 360 min. at $0.5\ell$ water, temperature increase of water was $14^{\circ}C$ at the self exciting method and $16^{\circ}C$ at the external exciting methods, respectively.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권8호
• /
• pp.417-422
• /
• 2006

This paper presents the effect of driving waveform for piezoelectric bend mode inkjet printhead with optimized mechanical design. Experimental and theoretical studies on the applied driving waveform versus jetting characteristics were performed. The inkjet head has been designed to maximize the droplet velocity, minimize voltage response of the actuator and optimize the firing frequency to eject ink droplet. The head design was carried out by using mechanical simulation. The printhead has been fabricated with Si(100) and SOI wafers by MEMS process and silicon direct bonding method. To investigate how performance of the piezoelectric ceramic actuator influences on droplet diameter and droplet velocity, the method of stroboscopy was used. Also we observed the movement characteristics of PZT actuator with LDV(Laser Doppler Vibrometer) system, oscilloscope and dynamic signal analyzer. Missing nozzles caused by bubbles in chamber were monitored by their resonance frequency. Using the water based ink of viscosity of 4.8 cps and surface tension of 0.025 N/m, it is possible to eject stable droplets up to 20 kHz, 4.4 m/s and above 8 pl at the different applied driving waveforms.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.834-839
• /
• 2007

This paper investigates the distortion of magnetic field of a brushless DC (BLDC) motor due to deformed rubber magnet. Global or local deformation of rubber magnet in the BLDC motor is mathematically modeled by using the Fourier series. Distorted magnetic field is calculated by using the finite element method, and unbalanced magnetic force are calculated by using the Maxwell stress tensor. The first harmonic deformation in the global deformation of rubber magnet generates the first harmonic driving frequency of the unbalanced magnetic force, and the rest harmonic deformations of rubber magnet except the harmonic deformation with multiple of common divisor of pole and slot introduces the driving frequencies with multiple of slot number ${\pm}1$ to the unbalanced magnetic force. However, the harmonic deformation with multiple of common divisor of pole and slot does not generate unbalanced magnetic force due to the rotational symmetry. When the rubber magnet is locally deformed, the unbalanced magnetic force has the first harmonic driving frequency and the driving frequencies with multiples of slot number ${\pm}1$.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2004년도 춘계 학술대회 발표논문집
• /
• pp.231-234
• /
• 2004

This paper describes an efficient method for improving the noise-robustness in speech recognition in a running car by considering wind noise. In driving car, mainly three kind of noises engine noise, tire noise and wind noise, are severely affect recognition performance. Especially wind noise is an important factor in driving car with window opened. We analyzed wind noise in various driving conditions that are 60, 80, 100 km/h with window fully opened, window half opened. We clarified that the recognition rate is significantly degenerated when the wind noise components in the frequency range above 200 Hz are large. We developed a preprocessing method to improve the noise robustness despite of wind noise. We adaptively changed the cutoff frequency of the front-end high-pass filter from 100 through 200 Hz according to the level of the wind noise components. By this method, the recognition rate is considerably improved for all kind of driving conditions

• 한국소음진동공학회논문집
• /
• 제13권7호
• /
• pp.548-554
• /
• 2003

This study alms to investigate the dynamic properties of express buses in the very low frequencies which cause motion sickness Incidence. Since passengers often use express buses for long distance traveling. it is a critical point whether the ride give rise to motion sickness or not. In the study accelerations at the three Points on the floor of the six test vehicles were measured during the driving at constant speeds. By applying the frequency weighting corves suggested in ISO 26.31-1, the Physical quantity of accelerations were changed into the perceptual amount used to judge quantitatively the incidence of motion sickness. Motion sickness dose values were calculated from the frequency weighted time history of acceleration signals, and compared between the vehicles, driving conditions. and the seat positions in the bus. During the 50 minutes' driving on the public road and high ways. the vomiting incidence ratios were seen to range from 0.4 to 0.8 ％. which is equivalent to 2.4 to 4.8 ％ for 5 hours' driving. Unlike the very smooth road conditions considered in this work, motion sickness dose values encountered in real situations are expected to increase.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.380-383
• /
• 2000

This paper presents about EL(electro-luminescent) driver with inverter Inverter is constructed by using characteristic of FET and its output characteristics is analysed for the variation of gate bias frequency and load. The optimum operating condition of inverter is that the gate bias frequency of FET equal two resonant frequency of circuit.