• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.5
• /
• pp.149-161
• /
• 2022

Because the speed limit affects moving speed, it is closely related to traffic accidents as well as traffic flow. The existing speed limit calculation methods consider various engineering factors such as lanes, intersection spacing, driveways, crosswalks, 85 percentile speed, land uses, and roadway geometric characteristics etc. However, it can be said that the engineering analysis is insufficient because the traffic impact analysis considering traffic volume is not carried out. In addition, only 85 percentile speed, which is the spot speed, does not reflect the characteristics of the traffic flow on the road. In this paper, the effect of the speed limit change on the moving speed and the travel speed was analyzed in detail accordinr to the variation of intersection spacing and traffic volume. And by using the results, we proposed a speed limit calculation method that maintains the same service level as before the speed limit change, thereby increasing the speed improvement effect and reducing the difference between moving speed and travel speed. In addition, a variable speed limit operation method according to the change in traffic volume was also suggested. This method is expected to be effective in terms of safety by reducing the speed difference, which affects the severity of traffic accidents, while securing the speed improvement effect, and increasing the speed limit compliance rate of drivers by operating the speed limit that reflects the speed change due to the variation of traffic volume.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.6
• /
• pp.97-114
• /
• 2022

Unlike ground roads, the on-ramp merging section of underground roads cannot be seen by drivers of main road due to tunnels. In this study, a driving simulator was used for analysis, and virtual driving experiments were carried out to assess the driver's visibility for different design factors. The driver's driving behavior was analyzed by setting scenarios considering the length of chevron markings and the approach speed from the main road. The results of the analysis were used to determine the design factors for ensuring visibility when constructing the virtual driving environment for each scenario. These factors, including speed, lane change points, and driver's gaze ratios, were reviewed for significance using a statistical approach. As a result, in scenarios with a higher approach speed from the main road, it was discovered that there was a difference in driver's behavior between specific scenarios depending on the length of the section with chevron markings. Based on these findings, this study suggests implications and feasible solutions to improve driver safety on the on-ramp merging section of underground roads.

• Journal of Korean Society of Disaster and Security
• /
• v.16 no.1
• /
• pp.105-113
• /
• 2023

Jeollanam-do has 25 land-to-island and island-to-island bridges, the largest number in Korea. It is a local government rich in specialized marine and tourism resources centered on the archipelago and the sea bridges connecting them. However, in the case of sea-crossing bridges, when strong winds or typhoons occur, there is an issue that increases anxiety among users and local residents due to excessive vibration of the bridge, apart from structural safety of the bridge. In fact, in the case of Cheonsa Bridge in Shinan-gun, which was recently opened in 2019, vehicle traffic restrictions due to strong winds and excessive vibrations frequently occurred, resulting in complaints from local residents and drivers due to increased anxiety. Therefore, based on the data measured using IoT measurement technology, it is possible to relieve local residents' anxiety about the safety management of marine bridges by providing quantitative and accurate bridge vibration levels related to traffic and wind conditions of bridges in real time to local residents. This study uses the existing measurement system and IoT sensor to constantly observe the wind speed and vibration of the marine bridge, and transmits it to local residents and managers to relieve anxiety about the safety and traffic of the sea-crossing bridge, and strong winds and to develop technologies capable of preemptively responding to large-scale disasters.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.2
• /
• pp.105-116
• /
• 2023

The fatality rate of secondary accidents is seven times that of general traffic accidents. If limited to highways, one in four deaths are said to occur from secondary accidents. Unexpected situations which do not give drivers time to prepare are the cause of secondary accidents. This risk results in more fatalities on highways with high driving speeds. Existing studies have conducted research on traffic accidents and on secondary traffic accidents that occur after a primary traffic accident, without considering unexpected situations that may occur on the road. Therefore, to reduce damage and casualties caused by secondary accidents, there is a need to create a safe road environment by removing the possibility of causing accidents. This study analyzes whether the day of occurrence, time of occurrence, and radius of the curve of an unexpected situation are related to the occurrence of an unexpected situation. This study was based on data of accidents that occurred in 2022 on the Cheonan-Nonsan Expressway and the Seoul-Yangyang Expressway. The radius of the curve was calculated by dividing the section of the highway into straight, clothoid, and curved sections through cluster analysis. Results of the analysis indicate that the day and time of occurrence and the curve radius are associated with unexpected situations.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.2
• /
• pp.164-181
• /
• 2023

In a low speed limit environment, the speed limit tolerance of automated traffic enforcement devices is very high, which is one of the main factors for the low compliance rate. Therefore, in this study, we aimed to the improve the speed limit tolerance and to present a new standard. The effects of the operator and user errors that can cause speeding by drivers were analyzed. Based on the results of the analysis, an improvement of the tolerance was proposed by applying an error in the enforcement device and GPS speed. In addition, long-term expected safety effects such as the accident rate and severity were estimated from the operator's perspective when improving the tolerance. As a result of the estimation, the speed limit compliance rate, accident rate, and change rate of a number of severe accidents due to speed change, and pedestrian traffic accident mortality rate were all improved in all speed limit environments. The introduction of the proposed improvement is expected to improve road safety significantly.

• Science of Emotion and Sensibility
• /
• v.26 no.2
• /
• pp.129-140
• /
• 2023

Following ISO 20471, in this study, first, two sets of safety clothes and safety vests were made by designing and attaching animal and bird patterns preferred by children to retroreflective films and black fabrics on those fluorescent fabrics and retroreflective materials prescribed by international standards. Second, by mounting a smart photonic device on the safety clothing so that the body can be recognized from a distance even without an ambient light source at night, children can emit three types of light depending on the situation with just one-touch of the button. From a result of comparison with visibility a day and night by dressing a mannequin in the made smart safety clothing, the difference in visibility was evident at night, it was confirmed that we can see the figure of a person even at a distance of approximately 70 m. Therefore, it is expected to contribute to the prevention of traffic and other accidents on the road, as the drivers driving at night or in bad weather can recognize a person from a distance. Third, in case of the energy is exhausted and cannot maintain the stability of the light-emitting function of the optical faber, we can use energy harvesting device, and the light-emitting time will be extended. As a result it comes up to emit light stably for a long time. And this prove that smart photonic safety clothing can also be used for night workers. Therefore, optical fiber safety clothing is expected to be highly wearable not only in real life but also in dark industrial sites due to stable charging by applying the energy harvesting provided by solar cells.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.1
• /
• pp.233-251
• /
• 2023

Metropolitan buses are managed as either a direct seat type or a metropolitan express type according to the 「Passenger Transport Service Act」. However, a management system that reflects the characteristics of metropolitan buses is not currently established. Therefore, in this study, the driving characteristics of metropolitan buses, dangerous driving behavior characteristics of metropolitan bus drivers, metropolitan bus accident characteristics, and the safety management system of domestic and foreign buses and other means were investigated. Through this, a plan for strengthening the safety management of metropolitan buses suitable for Korea was presented by dividing it into short-term and mid to long term. The short-term plan is a plan that can be carried out through consultation between metropolitan bus agencies and transportation companies, and the mid to long term plan is a plan that can be implemented only when related laws are revised. Through this study, it is expected to serve as an opportunity for in-depth discussions by the government, business operators, and related experts to strengthen the safety management of metropolitan buses.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.1
• /
• pp.311-326
• /
• 2023

This paper proposes a plan to improve the installation and operation of traffic safety facilities using a microscopic simulation by confirming the difference in the perception method and range of autonomous vehicles and human vehicles. In this study, the existing 『Traffic Safety Sign Installation·Management Guidelines』 was reviewed, and safety signs among traffic safety facilities were classified according to changes in vehicle behavior. Subsequently, for the classified facilities, the installation location of the traffic sign was changed through simulation experiments, and the optimal location was inferred to suggest an improvement plan. This study confirmed how traffic safety facilities installed based on the visibility of human drivers affect road efficiency and safety in mixed traffic flow with autonomous vehicles and human-controlled vehicles. The optimal location derived through this study is meaningful because it can be used as the basis for revising the guidelines on the installation and management of traffic safety facilities.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.1
• /
• pp.93-102
• /
• 2023

This study conducted an effect evaluation before and after the installation of a vehicle information guidance system that provides drivers with information about vehicle speed and the presence or absence of pedestrians near pedestrian crossings. There are three types of scenarios: when no information is provided to the driver (S1), when only the vehicle driving speed is provided (S2), and when pedestrians are present on the pedestrian crossing and when both vehicle driving speeds are provided (S3). did. As a result of the survey, the speed reduction rate of the vehicle was found to be about 0.4~0.7km greater in S2 and S3 that provide information to the driver than in scenario S1. In addition, in the scenario S3, the speed reduction rate is 0.2km higher than that in the case where there are pedestrians near the pedestrian crossing, which further reduces the vehicle speed. Statistical analysis also showed that there was a difference in the speed reduction rate of the average vehicle for the three scenarios, and that the speed reduction rate was large in the presence of pedestrians.

• Design Convergence Study
• /
• v.15 no.1
• /
• pp.135-150
• /
• 2016

Due to the development of communication technology and expansion of Intelligent Transport System (ITS), the car is changing from a simple mechanical device to second living space which has comprehensive convenience function and is evolved into the platform which is playing as an interface for this role. As the interface area to provide various information to the passenger is being expanded, the research importance about smart car based user experience is rising. This study has a research objective to propose the guidelines regarding the smart car user experience elements. In order to conduct this study, smart car user experience elements were defined as function, interaction, and surface and through the discussions of UX/UI experts, 8 representative techniques, 14 representative techniques, and 8 locations of the glass windows were specified for each element. Following, the smart car users' priorities of the experience elements, which were defined through targeting 100 drivers, were analyzed in the form of questionnaire survey. The analysis showed that the users' priorities in applying the main techniques were in the order of safety, distance, and sensibility. The priorities of the production method were in the order of voice recognition, touch, gesture, physical button, and eye tracking. Furthermore, regarding the glass window locations, users prioritized the front of the driver's seat to the back. According to the demographic analysis on gender, there were no significant differences except for two functions. Therefore this showed that the guidelines of male and female can be commonly applied. Through user requirement analysis about individual elements, this study provides the guides about the requirement in each element to be applied to commercialized product with priority.