• Journal of the Korean Institute of Gas
• /
• v.18 no.5
• /
• pp.47-51
• /
• 2014

This paper is to analyze and study the fire examples in respect of intake and exhaust, alternator tuning and inflow of inflammables on exhaust part in a car. In the first example, the driver diverted the intake and exhaust system for tuning of a car. Stopping a car to rest for moment, the flammable styrofoam scrap go into exhaust pipe that installed with exhaust manifold newly. It certified the fact that catched fire gradually, furthermore enlarged the fire by leaking fuel. In the second example, the driver enlarged the generator performance to divert the audio system in side room., it knew the fact that the electric wiring connected with generator gave the cause of outbreak a fire by overheating. In the third example, the serviceman replaced the engine oil using funnel-shaped, he put the a bottle of plastic pat onto engine cover carelessly. Consequentially, it found the fire occurrence in the engine room. Therefore, the driver never divert the intake and exhaust and generator construction of a car abnormally. Also, repairing and inspecting a car, the serviceman have a care to not occur the fire by inflammables.

• Journal of Korean Society of Transportation
• /
• v.24 no.7 s.93
• /
• pp.65-79
• /
• 2006

The ATIS(Advance Traveler Information System), as one part of ITS, is a system aiming to disperse traffic volume on transportation networks by providing traffic information to transportation users on pre-trip and en-route trips. One of tools in ATIS is usage of VMS(Variable Message Signs). It provides to the drivers with direct information about state of processing direction. which is considered as the most effective method in ATIS. The purposes of providing VMS information are classified two categories. One is to provide simple information to drivers for their convenience. The other is to manage traffic demand to improve transportation network performance. However, for more effective and reliable VMS information, several strategies should be taken into account. The main VMS management strategy is "Traffic Diversion Strategy for minimum delay" when traffic congestion or incident are occurred. For effective operation. firstly. reasonable diversion traffic volume is determined by network traffic condition Secondly, it is necessary to make providing information strategy which reflects driver response behavior for controling diversion traffic volume. This paper focuses on the providing real-time route guidance information by VMS when congestion is occurred by the incidents. This sturdy estimates time-dependent system optimal diversion rate that inflects travel time and queue lengths using traffic flow simulation model on base Cellular Automata. In addition, route choice behavior models are developed using binary logit model for traffic information variable by traffic system controller. Finally, this study provides time-dependent VMS massage contents and degree of providing information in order to optimize the traffic flow.

• Archives of design research
• /
• v.12 no.4
• /
• pp.99-108
• /
• 1999

The interior space in a passenger car is consisted with many partial elements, and the instrument panel is the most important part from all of them, which is designate the total image of the interior design and the space variation, drivability and safety of the interior space. ] The instrument panel of a passenger car in the early age had the concept of a wall between the engine room and the passenger cabin on which the instrument for the driver were fitted. Therefore the central mounting of the instruments was the typical feature regardless of the position of a driver seat. As the automobiles became more functional with many equipments, driver oriented instrument panel with energy absorbing materials had been developed, and that was the beginning of the various instrument panel design of these days. The recent instrument panels of passenger car have the tendency of going back to the central instrument mounting as it was at the past on a few cars for the strict safety regulation, a new production technology and for the enhanced drivability. It can be summarized into a few results as these with the analysis of a few recent instrument panels. -minimizing the total volume for the better frontal visibility. -energy absorbing and passive structures for the strict impact regulations. -revival of central instrument mounting for the convenience and safety through minimizing the difference of the focal length of a driver.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.138-142
• /
• 2004

In this paper, we present a new method for monitoring of ECU's sensor signals of vehicle. In order to measure the ECU's sensor signals, the interfaced circuit is designed to communicate ECU and the Embedded Linux is used to monitor communication result through Web the Embedded Linux system and this system is said "ECU Interface Part". In ECU Interface Part the interface circuit is designed to match voltage level between ECU and SA-1110 micro controller and interface circuit to communicate ECU according to the ISO, SAE communication protocol standard. Because Embedded Linux does not allow to access hardware directly in application level, anyone who wants to modify any low level hardware must develop device driver. To monitor ECU's sensor signals the most important thing is to match serial level between ECU and ECU Interface Part. It means to communicate correctly between two hardware we need to match voltage and signal level, and need to match baudrate. The voltage of SA-1110 is 0 ${\sim}$ +3.3V and ECU is 0 ${\sim}$ +12V and, ECU's communication Line K does multiple operation so, the interface circuit is used to match voltage and signal level. In Addition to ECU's baudrate is 10400bps, it's not standard baudrate in computer environment. So, we need to develop a device driver to control the interface circuit, and change baudrate. To monitor ECU's sensor signals through web there's a network socket program is working in Embedded Linux. It works as server program and manages user's connections and commands. Anyone who wants to monitor ECU's sensor signals he just only connect to Embedded Linux system with web browser then, Embedded Linux webserver will return the ActiveX webbased measurement software. It works in web browser and inits ECU, as a result it returns sensor signals through web. All the programs are developed with GCC(GNU C Compiler) and, webbased measurement software is developed with Borland C++ Builder.

• International Journal of Railway
• /
• v.2 no.2
• /
• pp.50-59
• /
• 2009

Numerous train operating companies provide training by means of driving simulators. A detailed analysis in the course of the rail research project 2TRAIN has shown that the simulation technology, the purposes of training and the overall concept of simulator-based training are rather diverse (Schmitz & Maag, 2008). A joint factor however are weak assessment capabilities and the fact that the simulator training is often not embedded into the overall competence management. This fact hinders an optimal use of the simulators. Therefore, 2TRAIN aims at the development of enhanced training and assessment tools. Taking into account that several simulators are already in use, the focus lays on the extension of existing simulation technology instead of developing entirely new systems. This extension comprises (1) a common data simulation interface (CDSI), (2) a rule-based expert system (ExSys), (3) a virtual instructor (VI), and (4) an _assessment database (AssDB). The foundation of this technical development is an assessment concept (PERMA concept) that is based on performance markers. The first part of the paper presents this assessment concept and a process model for the two major steps of driver performance assessment, i.e. (1) the specification of exercise and assessment and (2) the assessment algorithm and execution of the assessment. The second part describes the rationale and the functionalities of the simulator add-on tools. Finally, recommendations for further technical improvement and appropriate usage are given. based on the results of a pilot study.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.2
• /
• pp.157-168
• /
• 2017

Objective: This study aims to understand the motorcycle accident characteristics of food delivery workers and to present basic guidelines on accident prevention through accident. Background: It is known that food delivery workers have a high ratio of self-employed and youth workers, and occupations with frequent disasters. Therefore the occupation is known to really be in need of accident prevention policy. Method: This study analyzed the data of motorcycle crashes of 1,310 food delivery workers that have been approved as on-duty industrial crashes since 2015. The accident characteristics were examined by dividing them into driver related factors and accident related factors. Results: Among the motorcycle crashes of food delivery workers, 99.2% of the victims were males, 82.6% had less than six months of work experience. 76.2% of the victims were employed by the companies with less than five workers. In addition, there was a difference in accident characteristics according to age, type of cuisine, accident time of the day, injured organs and injured body part. Conclusion: The results of this study can be used as baseline data to devise systematic measures to prevent motorcycle crashes of food delivery workers. Application: Preventative measures for novice young part time workers including safety education/training need to be established.

• Journal of Sensor Science and Technology
• /
• v.27 no.2
• /
• pp.126-131
• /
• 2018

Unlike the hydraulic power steering (HPS) system, which operates by the high pressure of a fluid obtained from the engine power, the motor-driven power steering (MDPS) system uses an electric motor to steer the wheel without consuming engine power. To steer the wheel with an electric motor, a worm wheel and a worm gear rotating between the steering shaft and motor are required. Any imperfection during the construction of an MDPS system or in a composing part creates noise and vibration, which can be sensed by a driver. To solve the noise and vibration problems, each part must be designed to not resonate with other parts. In this work, we developed the measurement and analysis systems to obtain the noise and the vibration of an automobile MDPS system. A signal analyzer was equipped with a 96 kHz, 24-bit ADC and a 150 MHz digital signal processor. The predetermined threshold value of the vibration in the MDPS system was used to determine the pass/fail, and the results were displayed on the screen. Our system can be used in the fabrication line to swiftly determine any imperfections in the MDPS system construction.

• Science of Emotion and Sensibility
• /
• v.4 no.1
• /
• pp.53-60
• /
• 2001

As a part of HMS(Human-Machine System), the car is very important thing in common life. It is also a significant part to study on the controllers of car that is intentively related with all sensibilities during driving. There are lots of controllers on seating buck of the car. However, there are few study on the sensibility analysis of them. Most of all, the foot controller could be easily overlooked because it could be invisible. This study was based on relationship that the controllers fitted to the driving posture in the drivers' sensibility difference of two transmission modes, automatic and manual transmission. The results show the driver's preference driving posture and sensibility in two kinds of transmission cars. Consequently, it should be designed the seating buck for two different types respectively to be taken comfort driving posture and improve the safety for drivers. Also, it could reduce the fatigue and discomfort in the task of driving. The design of the controllers strongly effects on the drivers' response time. hereby this study was accessed to the sensibility of Korean with analyzing the relationship, quantitative data, and sensibility difference between two kinds of transmission cars.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.5
• /
• pp.2001-2006
• /
• 2017

This paper explains the effects of the weak signal of a rotating-type electric field mill sensor fabricated for measuring the intensity of the electric field generated by high-voltage direct current (HVDC) power transmission lines. The fabricated field mill consists of two isolated electrode vanes, a motor driver, and a ground part. The sensor plate is exposed to and shielded from the electric field by means of a rotary shutter consisting of a motor-driven mechanically complementary rotor/stator pair. When the uncharged sensor plate is exposed to an electric field, it becomes charged. The rotating electrode consists of several conductive vanes and is connected to the ground part, so that it is shielded. Determining the appropriate design variables such as the speed of the vane, its shape, and the distance between the two electrodes, is essential for ensuring optimal performance. By varying the speed, the weak signal characteristics which is used to signal processing and calibration experiment are quite different. Each weak signal pattern was analyzed along with the output voltage characteristics, in order to be able to determine the intensity of the electric field generated by HVDC power transmission lines with accuracy.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.103-106
• /
• 2009

Fracture characteristics of plate shape using shock tube for glass filled ceramics was carried out. Glass filled ceramics have been considered as a promising candidate material for the dome port cover of air breathing engine. This part of the air breathing engine has an important role separating solid and liquid fuel, and needs the frangible characteristics that the fracture of a part should not affect the internal components of combustion. The objectives of this study are to evaluate the fracture pressures for various thicknesses and diameters of shock impact area. Also fracture phenomena of separated membrane using a shock tube are observed. The experimental apparatus of shock tube consists of a driver, a driven section and a dump tank. The used material is glass filled ceramic made from Corning company. Specimens are used 3, 4.5 and 6mm thickness. Also diameters of shock wave area are chosen 70, 60 and 50 mm. It is expected that the results obtained from this study can be used in the basic data for the dome port cover design of an air breathing engine.