• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.2
• /
• pp.180-185
• /
• 2011

The TPMS(Tire Pressure Monitoring System) is an electronic system designed to display the air pressure inside the pneumatic tires and report real-time tire-pressure information to the driver of the vehicle, either via a gange, a pictogram display, or a simple low-pressure warning light. Although the data measured by TPMS sensor is transmitted to internal signal processer in a vehicle through wireless communication, the receiver may suffers from various interferences such as amateur radio station, RFID(Radio-Frequency IDentification) for controlling container, RKE(Remote Keyless Entry) signal, and so on. In this paper, we consider beamforming technology to suppress various high-power interference signals for the TPMS wireless communications. Also, we propose the proper data structure and antenna arrangement for the beamformer inside the vehicle. The performance for the interference suppression is illustrated by computer simulation example.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1327-1335
• /
• 2012

TPMS (Tire Pressure Monitoring System) is a safety assistant system to prevent the serious accident due to the damaged tire by the abnormal tire pressure. It is designed to transmit the measured data for pressure and temperature of tires from the sensor unit installed in each tire to signal processing unit installed in a vehicle. Based on the received information, a driver monitors the condition of tires using a display device, to maintain the optimum travelling condition. Since TPMS should employ the wireless communication technique, it may suffer from various interferences from external electrical or electronics devices. In order to suppress them, the beamforming techniques such as switching, minimum-variance distortionless-response (MVDR), and generalized sidelobe canceler (GSC) have been considered for TPMS. In this paper, we calculate computational complexities of three beamformers and suggest mathematical basis to compare their performance of the complexity.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.241-246
• /
• 2006

The paper presents the preparations work and experiences gained from realtime GPS car monitoring during the European Rally Championships organized on 10-12 June 2005 in Poland. The developed system is based on GPS and GSM/GPRS technology. Distribution and teletransmission of data are possible using different GSM operators in Poland, which makes the system fully independent. The system's server collects data from rally cars, processing and send data through VPN connections to the SQL server located in main control room. Data can be collected in real time via Internet or GPRS. Some information on GSM/GPRS range during rally championships are also presented in the paper. The study covered many trials and tests of different software and various configurations of the GPRS modems before finally the system started to work. Information coming from 10 Rally Cars were collected to the SQL Server continuously in one second interval. In real time mode these all data were displayed simultaneously in the rally main control room and in the rally press conference room. Paper describes also adopted emergency procedures and remote reconfiguration of GPS/GPRS boxes inside rally cars made during championships. Some problems and method of practical solutions are presented to avoid active jamming dangerous for a driver and his pilot, having system of communication intercoms jammed by teletransmission of GPRS 900/1800 MHz. In cooperation with rally teams special GPS/GPRS safety boxes were designed and made. Monitoring of all 7 rally stages with GPS receivers and method of calibrations of the maps were presented. GSM signal coverage was also checked in all stages. All data transmitted from rally cars were recorded in the computer. Some of our GPS cars had accidents and dispite them information were continuously sent to server. There is possibility to show in post mission mode the position of chosen cars in our rally application. Some information of best rally cars are presented also in the paper.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.11
• /
• pp.2753-2758
• /
• 2014

Around-View, the image processing device which increases the comfort of drivers is sold in the market. This system prevents accidents in advance while driving or parking. The accidents are caused with their inexperienced driving or bad visibility. It is developed for driving convenience. However, it dosen't spread to the driver widely due to the problem of the high installation costs and complex installation process. First, expensive equipment second, difficult development environment and third, inconvenient installation procedure. So the drivers don't have many opportunities to use this system and dare to develop this system. I think if one of the problems can be solved, users might be able to access this system at low cost. In this paper, the AVM(Around-View Monitoring) minimizes two of them. Expensive equipment, inconvenient installation. The costly problems were solved by using low-cost USB device and rear cameras. In view of inconvenient installation process, the new system was designed to make it easy for people to install it. Through this, it can ease the burden of consumers.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.547-550
• /
• 2009

This paper presents a digital based input/output interface circuit for controlling and monitoring the Diesel Engine Generator for Emergency. In order to monitor and control of the Emergency Diesel Engine Generator, controlling and monitoring circuits need 5 analog input channels, 2 pick-up coil measuring circuits, 10 digital input channels containing Broken Wire Detect function, and 7 relay control signal output channels. This system performs signal processing of input signal taking advantage of simple filter circuit, photo-coupler and comparator circuit at analog input parts, and output signals for main relay is designed acting by double control, so it prevents malfunction completely. And it improves accuracy of speed input signal by applying digital circuit that processes pick-up coil signal.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.5A
• /
• pp.376-381
• /
• 2005

In this paper, we propose a new wavelength locking structure which uses the Michelson interferometer equipped with a movable arm. The proposed one consists of LD driver, Michelson interferometer, automatic temperature controller, automatic power controller, and signal processor. This structure can provide the wavelength locking capability of a resolution below 0.0005nm(=62.4MHz) and cope easily with an external environment variation using movable arm of Michelson interferometer to give a good stability.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.12
• /
• pp.94-100
• /
• 2011

TCMS is the most important controller in the subway train for reliable train control and service oriented flexibility. TCMS software charges communications and control of train and maintains control devices so we use QNX for real-time control. This paper introduces overall software development of TCMS using various diagrams. Software implementation details in TC and CC are explained using deployment diagram through train configuration. Driving control process among many processes is focused to present implement details which controls train by driver or automatic train operation and handles commands to control deriving devices in cars. Reliable operation of train and easy maintenance process is achieved through the same hardware in train control computer and car control computer.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.4
• /
• pp.134-140
• /
• 1998

The authors have shown that the performance of discrete-time observer-based monitoring systems can be represented by the performance index k$_2$(P) (condition number of the eigensystem P of the observer matrix in terms of L$_2$ norm). The observers with the minimized performance index can be defined as robust observers in the sense that the observer performance can be guaranteed in harsh environments. In this paper, based on the performance index, a design methodology for the robust discrete-time observer is developed. Similar to the continuous-time case, the methodology determines the structure and eigenvalues of the observer matrix simultaneously. A complete design procedure is given for single-output case and is illustrated with a spindle-driver example. The simulation results demonstrate the improved performance compared with a traditional pole-placement observer technique.

• Information and Communications Magazine
• /
• v.20 no.11
• /
• pp.1550-1559
• /
• 2003

The convergence of fixed and wireless networks in data communication is providing the necessary driver for M2M commerce to take-off. The opportunities provided by M2M Commerce areonly limited by imagination. Automotive Fleet and Freight, Tolling, Water and Power Metering, Supply Chain Management including Asset Management, Remote Monitoring and Diagnostics, Energy Management and Access Control and Security are among the many M2M applications that are currently getting rolled out. ARC Group expects the worldwide solutions market to be worth in excess of US$ 100 billion by 2007. In addition, operator revenues worldwide from the transport of Telematics data alone will rise from US$ 3.5 billion in 2002 to US$ 78 billion by 2007. This paper discusses some of the lifestyle and business opportunities provided by M2M Commerce in the new ear of network convergence. It also provides some case studies to demonstrate the benefits of M2M Commerce across the supply chain. The key focus of the paper is on achieving enhanced lifestyle, cost reduction, improved profitability and enhanced customer relationship management through M2M Commerce.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.758-761
• /
• 1991

Using one chip microcontroller 87Cl96 (On chip EPROM type) and EPLD (Erasable & Programable Logic Device), an implantable control system to drive pendulum type electromechanical total artificial heart was developed. This control system consists of 4 parts, main management system, motor driver with power regulator, state monitoring system and communication part. The main system has the functions for speed detection, PI(proportional and integration) control, PWM generation, communication and analog data processor. Two kinds of power system were used and separated by 8 photo coupler arrays to improve the system stability. The performances of each compartments were compared with our previous z80 microprocessor based control system and good correspondences was shown. Logic power consumption was reduced to a one third of our previous controller. Using mock circulation tests, the overall performances of control system are evaluated.