• Journal of computational fluids engineering
• /
• v.20 no.1
• /
• pp.77-83
• /
• 2015

Flow characteristics of synthetic jet based flow supplying devices have been computationally investigated for different device shapes. Jet momentum was produced by the volume change of a cavity by two piezoelectric-driven diaphragms. The devices have additional flow path compared with the original synthetic jet actuator, and these flow path changes the flow characteristics of synthetic jet actuator. Four non-dimensional parameters, which were functions of the shapes of the additional flow path, were considered as the most critical parameters in jet performance. Comparative studies were conducted to compare volume flow rate and jet velocity. Computed results were solved by 2-D incompressible Navier-Stokes solver with k-w SST turbulence model. Detailed computations revealed that the additional flow path diminishes suction strength of the synthetic jet actuator. In addition, the cross section area of the flow path has more influence over the jet performances than the length of the flow path. Based on the computational results, the synthetic jet based flow supplying devices could be improved by applying suitable shape of the flow path.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.3
• /
• pp.624-634
• /
• 1994

A numerical method which combines equal-order velocity-pressure formulation originated from SIMPLE algorithm and streamline upwinding method has been developed. To verify the proposed numerical method, we considered the lid-driven cavity flow and backward facing step flow. The trend of convergence history is stable up to the error criterion beyond which the maximum value of error is oscillatory due4 to the round-off error. In the present study, all results were obtained with the single precision calculation up to the given error criterion and it was found to be sufficient for our purpose. The present results were then compared with existing experimental results using laser doppler velocimetry and numerical results using finite difference method and mixed interpolation finite element method. It has been shown that the present method gives accurate results with less memories and execution time than the coventional finite element method.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.11a
• /
• pp.49-55
• /
• 2009

This paper evaluates performances of a recently developed divergence-free finite element method based on Hermite interpolated stream functions. Velocity bases are derived from Hermite interpolated stream functions to form divergence-free basis functions. These velocity basis functions constitute a solenoidal function space, and the simple gradient of the Hermite functions constitute an irrotational function space. The incompressible Navier-Stokes equation is orthogonally decomposed into a solenoidal and an irrotational parts, and the decoupled Navier-Stokes equations are projected onto their corresponding spaces to form proper variational formulations. To access accuracy and convergence of the present algorithm, three test problems are selected. They are lid-driven cavity flow, flow over a backward-facing step and buoyancy-driven flow within a square enclosure. Hermite interpolation functions from cubic to quintic are chosen to run the test problems. Numerical results are shown. In all cases it has shown that the present method has performed well in accuracies and convergences. Moreover, the present method does not require an upwinding or a stabilized term.

• Journal of the Korean Society of Visualization
• /
• v.1 no.1
• /
• pp.75-81
• /
• 2003

A custom micro-PIV optics assembly has been used to measure the flow fold inside a T-junction of a microchannel. The micro-PIV system consists of microscope objectives of various magnifications, a dichroic cube, and an 8-bit CCD camera. Fluorescent particles of diameters 620 nm have been used with a Nd:YAG laser and color filters. A programmable syringe pump with Teflon tubings were used to inject particle-seeded distilled water into the channel at flow rates of 2.0, 4.0, 6.0 mL/hr. The micro-channels are fabricated with PDMS with a silicon mold, then O$_{2}$ -ion bonded onto a slide glass. Results show differences in flow characteristics and resolution according to fluid injection rates, and magnifications, respectively. The results include PIV data with vector-to-vector distances of 2 $\mu$m with 32 pixel-square interrogation windows at 50$\%$ overlap.

• 한국전산유체공학회:학술대회논문집
• /
• 1998.11a
• /
• pp.114-120
• /
• 1998

The present numerical study investigates flow characters and heat transfer enhancement by the viscoelastic-driven secondary flow and buoyancy effect in a 2:1 rectangular duct. Three versions of thermal boundary conditions involving difference combination of heated walls and adiabatic walls are analyzed in this study. The Reiner-Rivlin model is adopted as a viscoelastic fluid model to simulate the secondary flow and temperature-dependent viscosity model is used. Calculated Nusselt numbers are very good agreement with experimental results for reported viscoelastic fluids. It is found that the heat transfer enhancement is mainly caused by the viscoelastic-driven secondary flow and buoyancy-induced secondary flow play a role of promoting this effect.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.423-426
• /
• 2002

A custom micro-PIV optics assembly has been used to measure the flow field inside a T-shaped microchannel. The micro-PIV system consists of microscope objectives of various magnifications, a dichroic cube, and an 8-bit CCD camera. Fluorescent particles of diameters 620nm have been used with a Nd:YAG laser and color filters. A programmable syringe pump with Teflon tubings were used to inject particle-seeded distilled water into the channel at flow rates of $420,\;40,\;60{\mu}L/hr$. The microchannels are fabricated with PDMS with a silicon mold, then $O_2-ion$ bonded onto a slide glass. Results show differences in flow characteristics and resolution according to fluid injection rates, and magnifications, respectively. The results show PIV results with vector-to-vector distances of $2{\mu}m$ with 32 pixel-square interrogation windows at $50{\%}$ overlap.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.436-439
• /
• 2008

Computer simulation of multiphase flows has grown dramatically in the last two decades. In this work, we have studied the flow characteristics of immiscible two fluids in a 2-D micro channel driven by pressure gradient using multi-phase lattice Boltzmann method suggested by Shan and Chen(1993) considering the fluid-surface interaction. we tried to examine the effects of parameters related to the two phase flow characteristics and pressure drop in the micro channel like contact angle and channel configuration by changing their value. The results of current study could show the lattice Boltzmann method can simulate the behaviors of two phase flow in the region of micro fluidics well.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1004-1009
• /
• 2003

Electroosmotic flow induced by an applied electrostatic potential field in microchannel is analyzed in this study. The electroosmotic flow is an alternative to pressure driven flow in microchannels, but the usage has been limited to the simple cases. In this study, We analyze electroosmotic flow driven by inhomogeneous surface charge on the channel wall. The surface charge varies along a direction perpendicular to the electric field in order to generate the electroosmotic flow. A numerical results substantiate the highly efficient mixing performance. It is highly the beneficial to fabrication process since only straight microchannel rather than complex geometry is enough to yield efficient mixing.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.666-668
• /
• 1998

In this paper we illustrate the design of a node label data flow machine based on self-timed paradigm. Data flow machines differ from most other parallel architectures, they are based on the concept of the data-driven computation model instead of the program store computation model. Since the data-driven computation model provides the excution of instructions asynchronously, it is natural to implement a data flow machine using self timed circuits.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.6
• /
• pp.1640-1647
• /
• 1993

The numerical diffusion arising from streamline-to-grid skewness produces a deteriorating effect on the numerical accuracy. The QUICKER scheme to reduce the numerical diffusion requires more computational effort than the HYBRID scheme. This paper deals with the relative computational efficiencies of adopting QUICKER scheme with a coarser grid system and of adopting HYBRID scheme with a denser grid system. Laminar driven cavity flow with Re=400, 1000 is used as a test problem. It is found that QUICKER scheme with a coarser grid system is more efficient than the HYBRID scheme with a denser grid system.