• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1657-1658
• /
• 2006

An external electrode fluorescent lamps (EEFLs) have the advantage of a long lifetime in the early stages of the study on plasma discharge, interest in the lamp continues. Studies on the operation of external electrode fluorescent lamps have focused mainly on its use of a type of high frequency (MHz). By performing high brightness using a square wave operation method with the low frequency below 100kHz, which is applied to a narrowed tube type lamp that has several mm of lamp diameter. To solve these problems of CCFL, EEFL (External Electrode Fluorescent Lamp) is introduced. Because electrode of EEFL is on the outer surface of discharge tube, the electrode is perfectly prevented from the sputtering by accelerated ions. And it is possible to drive the many CCFLs at the same time, because EEFL shows the positively resistant characteristic. But EEFL has the large non-radiative power loss in sheath. In this study the novel electrode structure was introduced in order to reduce non-radiative power loss in sheath of EEFL. The novel electrode structure comes from the idea to combine conceptually capacitive discharge with inductive discharge. Thus, this study verifies the change in the optical characteristics according to the change in electrode structure through a Maxwell's electromagnetic field simulation and examines the relationship between the change in the EEFL electrode structure and brightness by measuring the optical characteristics.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5412-5419
• /
• 2011

The need is growing for high-speed spindle because various equipment are becoming more precise, miniaturization and high speed with the development of industries. Air-lubricated dynamic bearings are widely used in the optical lithographic manufacturing of wafers to realize nearly zero friction for the motion of the stage. Air-lubricated dynamic bearing can be used in high-speed, high-precision spindle system and hard disk drive(HDD) because of its advantages such as low frictional loss, low heat generation, averaging effect leading better running accuracy. In the paper, numerical analysis is undertaken to calculate the performance of air-lubricated dynamic bearing with herringbone groove. The static performances of herringbone groove bearings which can be used to support the thrust load are calculated. Electrochemical micro machining($EC{\mu}M$) which is non-contact ultra precision machining method has been developed to fabricate the air-lubricated dynamic bearing and optimum parameters which are inter electrode gap size, concentration of electrolyte, machining time are simulated using numerical analysis program.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.579-582
• /
• 2004

File share system in client/server method requires server of High performance and capacity and this server is very expensive and management is complex and is been influenced much to flatform. Also, extension of correct memory or hard drive etc. causes a lot of expenses to server. While, may minimise human who happen by buying high-capacity server by dispersing file public ownership way unuse expensive server in client/serve. way who put up files in PC(client) to a sewer and manage files and make use of only client computers because public ownership of data and government official in P2P(peer to peer) environment, waste of material resources. Many people are interested to P2P by such reason, researches that use P2P to connection field to be Moba that have Gakgwangbatgo current are gone vigorously.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.1
• /
• pp.65-73
• /
• 2007

This paper presents an on-line correction method of current measurement errors for a pure-integration-based flux estimation down to 1-Hz stator frequency. An observer-based approach is taken as one possible solution of eliminating the dc offset and the negative sequence component of unbalanced gains in the synchronous coordinate. At the same time, the positive sequence component estimation is performed by creating an error signal between a motor model reference and an estimated q-axis rotor flux established by a permanent magnet (PM) in the synchronous coordinate. The compensator utilizes a PI controller that controls the error signal to zero. The proposed technique further contains a residual error compensator to completely eliminate miscellaneous disturbances in the estimated flux. The developed algorithm has been implemented on a 1.1-kW permanent magnet synchronous motor (PMSM) drive to confirm the effectiveness of the proposed scheme.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.10
• /
• pp.2187-2193
• /
• 2002

We present a novel method for 3D microfabrication with LIGA process that utilizes a deep X-ray mask in which a micro-actuator is integrated. The integrated micro-actuator oscillates the X-ray absorber, which is formed on the shuttle mass of the micro-actuator, during X-ray exposures to modify the absorbed dose profile in X-ray resist, typically PMMA. 3D PMMA microstructures according to the modulated dose contour are revealed after GG development. An X-ray mask with integrated comb drive actuator is fabricated using deep reactive ion etching, absorber electroplating, and bulk micromachining with silicon-on-insulator (SOI) wafer. 1mm $\times$ 1 mm, 20 $\mu$m thick silicon shuttle mass as a mask blank is supported by four 1 mm long suspension beams and is driven by the comb electrodes. A 10 $\mu$m thick, 50 $\mu$m line and spaced gold absorber pattern is electroplated on the shuttle mass before the release step. The fundamental frequency and amplitude are around 3.6 kHz and 20 $\mu$m, respectively, for a do bias of 100 V and an ac bias of 20 $V_{p-p}$ (peak-peak). Fabricated PMMA microstructure shows 15.4 $\mu$m deep, S-shaped cross section in the case of 1.6 kJ $cm^{-3}$ surface dose and GG development at 35$^{\circ}C$ for 40 minutes.

• Journal of Institute of Convergence Technology
• /
• v.2 no.1
• /
• pp.24-30
• /
• 2012

In this study, the trucks(2.9-liter) have been developed to use DME as fuel, and performance test of the vehicle's DME engine, power, emissions, fuel economy and vehicle aspects was conducted. For experiments, the fuel system(common-rail injectors and high-pressure pump included) and the engine control logic was developed, and ECU mapping was performed. As a result, the rail pressure from 40MPa to approximately 65% increase compared to the base injector has been confirmed that. Also, the pump discharge flow is 15.5 kg/h when the fuel rail pressure is 400rpm(40 MPa), and the pump discharge flow is 92.1 kg/h when the fuel rail pressure is 2,000rpm(40MPa). The maximum value of full-load torque capability is 25.5kgfm(based on 2,000rpm), and more than 90% compared to the level of the diesel engine were obtained. The DME vehicle was developed in this study, 120 km/h can drive to the stable, and calculated in accordance with the carbon-balance method of fuel consumptions is 5.7 km/L.

• The Journal of Industrial Distribution & Business
• /
• v.9 no.1
• /
• pp.89-97
• /
• 2018

Purpose - The Regional Comprehensive Economic Partnership (RCEP) among 16 countries including South Korea, the largest free trade agreement in the Asia-Pacific region, will be concluded next year. The participating countries decided to pursue a comprehensive and high -quality agreement, while ensuring flexibility considering development level of each country. In this study, trade structures between nations from 2005 through 2016 were examined to see the impact that this agreement will have on Korea and to come up with effective countermeasures. Research design, data, and methodology - The method of analysis includes the analysis of the trade matrix, which is useful for identifying the dependency of the individual countries on the market in the region and the reciprocal dependency of the member countries on the market, and the index of intensity of trade, which is useful for figuring out the share of trade between the parties in total trade. Results - The results showed that first, the international trade coefficients of Vietnam and Philippines are higher than those of China and Japan. Secondly, the international inducement coefficients between China and Japan were high, and that between Indonesia and Burma were low, indicating that Korea's exports did not have much effect on export increase of these countries. Third, as a result of analyzing Korea's trade intensity, it was found that export intensity and import intensity were greater than 1 in Vietnam and Philippines, which shows that there is a high degree of relational bond with these countries. India and Laos countries still have a low level of relational bond, which indicates that there is room for improvement in economic relations when the agreement is concluded. After the signing of the agreement in the future, more diverse industrial structures should be continuously studied. Conclusions - The analysis of trade matrix, trade structure, trade inducement coefficient and trade intensity between Korea and RCEP participating countries shows that the majority of the countries have the high level of economic relationship with Korea. Korea should drive a harder bargain when negotiating the terms of the RCEP, in comparison with the level of the existing FTA agreement excluding Japan.

• Journal of Power Electronics
• /
• v.18 no.6
• /
• pp.1729-1750
• /
• 2018

Voltage source inverters (VSIs) are widely used to drive induction motors in industry applications. The quality of output waveforms depends on the switching sequences used in pulse width modulation (PWM). In this work, all existing optimal space vector pulse width modulation (SVPWM) switching strategies are studied. The performance of existing SVPWM switching strategies is optimized to realize a tradeoff between quality of output waveforms and switching losses. This study generalizes the existing optimal switching sequences for total harmonic distortions (THDs) and switching losses for different modulation indexes and reference angles with a parameter called quality factor. This factor provides a common platform in which the THDs and switching losses of different SVPWM techniques can be compared. The optimal spatial distribution of each sequence is derived on the basis of the quality factor to minimize harmonic current distortions and switching losses in a sector; the result is the minimum ripple loss SVPWM (MRSLPWM). By employing the sequences from optimized switching maps, the proposed method can simultaneously reduce THDs and switching losses. Two hybrid SVPWM techniques are proposed to reduce line current distortions and switching losses in motor drives. The proposed hybrid SVPWM strategies are MRSLPWM 30 and MRSLPWM 90. With a low-cost PIC microcontroller (PIC18F452), the proposed hybrid SVPWM techniques and the quality of output waveforms are experimentally validated on a 2 kVA VSI based on a three-phase two-level insulated gate bipolar transistor.

• The KIPS Transactions:PartB
• /
• v.17B no.3
• /
• pp.227-232
• /
• 2010

This paper proposes the real time lip reading method in the embedded environment. The embedded environment has the limited sources to use compared to existing PC environment, so it is hard to drive the lip reading system with existing PC environment in the embedded environment in real time. To solve the problem, this paper suggests detection methods of lip region, feature extraction of lips, and awareness methods of phonetic words suitable to the embedded environment. First, it detects the face region by using face color information to find out the accurate lip region and then detects the exact lip region by finding the position of both eyes from the detected face region and using the geometric relations. To detect strong features of lighting variables by the changing surroundings, histogram matching, lip folding, and RASTA filter were applied, and the properties extracted by using the principal component analysis(PCA) were used for recognition. The result of the test has shown the processing speed between 1.15 and 2.35 sec. according to vocalizations in the embedded environment of CPU 806Mhz, RAM 128MB specifications and obtained 77% of recognition as 139 among 180 words were recognized.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.5
• /
• pp.712-717
• /
• 2007

Using home network system including home server, home service robot, a variety of device, it is generally known that application of Multi Agent System for performing variously distributed process that can be occur in home environment, is efficient method. In this system, it is intelligent service robot that a key of human interface and physical service offer Therefore, using application of established multi agent system, we can defined Multi Agent Robot System. In 'open' home environment, between all agent data interaction and cooperation are needed for Multi Agent System offer to user that more efficient service. For this, we focus our attention on define as agent that can autonomic drive and offer to user that physical service robots and, design, suggest the simulator can display that between robot agents communication or between other agents, like home server, and robot agents communication information to user interface.