• Journal of The Korean Society of Grassland and Forage Science
• /
• v.23 no.2
• /
• pp.107-114
• /
• 2003

Growth characteristics and seed productivities of orchardgrass "Hwabsung 2 Ho" cultivated for seed production were examined in the NLRI from 2000 to 2002. The experimental design was a split-plot arrangement with three replications. The main-plots were three drill widths of 15, 30 and 45cm, and subplots were four nitrogen application levels of 45, 90, 135 and 180kg/ha in early spring. Lodging was less in 45cm of drill width than in 15 and 30cm and was not severe by 90kg per ha of nitrogen including 45cm of drill width. Number of panicles per $1\m^2$ was tended to be more in 15cm of drill width than in 30 or 45cm. Among 45cm of drill widths. 45kg per ha of nitrogen had most numerous panicles. Panicle length, number of 1st branch, weight of 1,000 grain, and germination of 30 or 45cm of drill width showed better characters than that of 15cm. Seed yield was not statistical different among the treatments but was some more in 30cm of drill width, and was tended not to be different among nitrogen levels. Therefore, considering lodging tolerances, seed yield components, and mechanizations, treatment with 45cm of drill width including 45kg per ha of nitrogen in early spring was better than other treatments for orchardgrass seed production.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.35 no.2
• /
• pp.119-124
• /
• 2015

In this study, we sought to evaluate the growth characteristics and seed productivities of domestic tall fescue that were cultivated with differing combinations of drill widths and nitrogen-application rates in early spring; the examination was conducted at the National Institute of Animal Science, RDA, from 2013 to 2014. The main plots were three widths of 15 cm, 30 cm, and 45 cm, and the subplots were subject to nitrogen-application rates in early spring of 45 kg/ha, 90 kg/ha, 135 kg/ha, and 180 kg/ha. The growth and development characteristics did not vary by treatment in terms of drill width and early-spring nitrogen application. Tall fescue Purumi showed a stable seed productivity of two tons or greater when the drill width was set at 15 cm and 90 kg/ha of nitrogen was applied in early spring. The narrower the drill width, the greater the numbers of both the ears and seeds, while the length of the ear was longer when the drill width was wider. Regarding the influence of the drill width and early-spring nitrogen application on the productivity of seed-producing straw, the dry matter productivity was higher when the drill width was narrower; however, no particular trend was observed with respect to different amounts of fertilizer. The average production amount of the first round of straw after seed gathering was 6,920 kg/ha. The second round produced an average 8,134 kg/ha of dry matter.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.22 no.3
• /
• pp.221-226
• /
• 2002

The effects of drill widths and nitrogen application levels on the growth characteristics and seed productivity of Italian ryegrasss(Lolium multiflorum Lam.) were evaluated. The experimental design was a split-plot arrangement with three replications. The main-plots were three drill widths of 15, 30 and 45cm, and subplots were three nitrogen application rates of 50, 75 and 100 kg/㏊ in early spring. Among the growth characteristics, lodging tolerance appeared to be highest in the treatment including 45cm of drill width and 50kg/㏊ of nitrogen application compared to other treatments. The numbers of stem per one square meter tended to be increased more in drill width of 15cm than in that of 30 or 45cm, but other growth characteristics were similar among treatments. In seed yield components, the numbers of spike per one square meter were getting increased according as drill width was narrower, but spike length and 1,000 seed weight were longer and heavier. respectively. The rate of ripened pains was highest in treatment including 30cm of drill width and 50kg/㏊ of nitrogen application. Maximum seed yield was also obtained in same treatment.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.5
• /
• pp.548-555
• /
• 1995

This study was aimed to provide understanding on the eco-physiological response of barley tillers as affected by sowing method. Yield and yield contribution rates of tillers were investigated with the data of field experiments in the Honam Crops Experiment Station of Iri, Korea from October 1986 to July 1987. Narrow-seeding (each row placement 40cm$\times$seeding width of each row 18cm), drill-seeding (20cm$\times$5cm) and broadcasting on wide ridge (each ridge placement 120cm$\times$ridge width 90cm) were applied to examine the effects of various sowing methods. Primary tillers such as mainstem, 1 and 2 produced ears in all treatments, but the ear from a secondary tiller of 11 was observed only in broadcasting on wide ridge. Drill-seeding was the highest in number of spikelet, grain and plump grain per ear, while narrow-seeding being the lowest. The plump grain yield per square meter was 679.8g in narrow-seeding, while drill-seeding and broadcasting produced more than narrow seeding by 28.7% and 16.8% respectively. The actual yields per l0a for sowing methods showed a similar pattern to plump grain yield per square meter in which the yield was 567.6kg by narrow-seeding and the increments of drill-seeding and broadcasting were 30.6% and 15.4%, respectively.

• Architectural research
• /
• v.11 no.2
• /
• pp.27-34
• /
• 2009

The purpose of this study is to investigate the problem of crack repair materials and methods in existing concrete structure and to propose the effective injection method on crack repair by packer type. The result of this study is as follows. It is investigated that the crack width in the inner matrix of concrete structure is decreased about 30-40% than that in the surface of the concrete structure. Also it is showed that the possibility which could be monolithic with injection part became higher if the injection part is installed near to surface of concrete on the punching method to vertical direction against crack area. The injection of repair material can be poured smoothly under about $10N/mm^2$ pressure on the condition that cracks are monolithic with injection part without dust by drill. The method which is effective injection for a repair material is the punching method in compliance with coredrill. But, the research continuously is necessary about minimum injection pressure.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.4 no.3
• /
• pp.32-38
• /
• 2005

Electrical discharge machining is the method of using thermal energy by electrical discharge. Generally, if the material of workpiece has conductivity even though very hard materials and complicated shape which are difficult to cut such as quenching steel, cemented carbide, diamond and conductive ceramics, the EDM process is favorable one of possible machining processes. But, the process is necessarily required of finish cut and heat treatment because of slow cutting speed, no mirror surface, brittleness and crack due to the residual stress for manufactured goods. In this experimental thesis, the super EDM drilling was developed for high precision semiconductor die steel and for minimization of leadframe width. It was possible to development of EDM drilling machine for high precision semiconductor die with the electrode guide and its modelling and stress analysis. The development of electrode with the copper pipe type was conducted to drill the hole from the diameter of 0.1mm to 3.0mm with the error of from 0.02mm to 0.12mm. From the SEM and EDX analysis, the entrance of the EDM drill was found the resolidification of not only the component of tungsten but also the component of copper.

• Journal of the Korea Institute of Building Construction
• /
• v.6 no.2 s.20
• /
• pp.91-98
• /
• 2006

The purpose of this study is to investigate the problem of crack repair materials and methods in existing concrete structure and to propose the effective injection method on crack repair by packer type. The result of this study is as follows. It is investigated that the crack width in the inner matrix of concrete structure is decreased about 30-40% than that in the sulfate of the concrete structure. Also it is showed that the possibility which could be monolithic with injection part became higher if the injection part if installed near to surface of concrete on the punching method to vertical direction against crack area. The injection of repair material can be poured smoothly under about $10N/mm^2$ pressure on the condition that cracks are monolithic with injection part without dust by drill. The effective method to pour the injection repair material is the punching method by coredrill but several research to minimize injection pressure should be continually.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.398-401
• /
• 2001

This paper presents rough cutting pat고 drilling. This method has differences from conventional method which uses boundary curve by intersecting object to machine and each cutting plane. Die-cavity shape is drilled in z-map, we select various tool and remove much material in the short time. as a result, this method raise productivity. The major challenges in die-cavity pocketing include : 1)finding an inscribed circle for removing material of unmachined regions, 2) selecting optimal tool and efficiently arranging tool, 3) generating offset surface of shape, 4) determining machined width according to the selected tool, 5) detecting and removing unmachined regions, and 6) linking PJE(path-joining element). Conventional machining method calling contour-map is compared with drilling method using Z-map, for finding efficiency in the view of productivity.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.3
• /
• pp.259-263
• /
• 2007

Sowing time of barley after cultivation of rice has frequently been delayed because of rainfall or some other reasons by rice cultivation. Partial tillage direct grain seeder with eight row, which had been developed for rice sowing and showed many advantages in wet field, were tested for barley sowing. After flooding during $2{\sim}3days$, plots were designed to make wet condition. Three sowing methods were tested; high ridged broadcasting, plat drill seeding and partial tillage direct grain seeding. It were impossible to sow properly even in 27% of soil water content by high ridged broadcasting, plat drill seeding but could be possible to sow normally by partial tillage direct grain seeder in 42% of soil water content as good as in 27% of soil water content. Initial growth condition after sowing in plots of partial tillage direct grain seeder were normal even in plots sown in more than 50% of soil water content. No. of spike, which was $508/m^2$, in plot of partial tillage direct grain seeder sowed at 30% soil water content was better than plat drill seeding, $404/m^2$. Yield and yield components of plot of partial tillage direct grain seeder, were higher than plot sowed by plat drill seeder in same soil water content. Partial tillage direct grain seeding can be a good sowing way for barley especially in wet condition. However, parts of seeder have to be improved for barley sowing; 1) ridged width of partial tillage direct grain seeder should be $10{\sim}20cm$ wider than 10 cm, which is necessary for drainage during barley growing season in wet paddy field. 2) sowing width of partial tillage direct grain seeder was not same with one of drill seeder which was the best width for light interception and should be shorter than 30cm.

• Journal of Periodontal and Implant Science
• /
• v.38 no.sup2
• /
• pp.385-394
• /
• 2008

Purpose: The aim of this study was to evaluate the factors affecting healing patterns of surgically created circumferential gap defects around implants in dogs. Materials and Methods: In four mongrel dogs, all mandibular premolars were extracted. After 8 weeks of healing periods, implants were submerged. According to the surface treatment, turned surface was designated as a group A and rough surface as a group B. In each dog, surgical defects on the left side were made with a customized tapered step drill and on the right with a customized paralleled drill. Groups were also divided according to the width of the coronal gaps: 1.0mm, 1.5mm, or 2.0mm. The dogs were sacrificed following 8 weeks and the specimens were analyzed histologically and histomorphometrically. Results: During the postoperative period, healing was uneventful and implants were well-maintained. As the size of the coronal gap was increased, the amount of bone-to-implant contact was decreased. The bone healing was greater in rough surface implants compared to the turned ones. About the defect morphology, tapered shape showed much bone healing and direct bone to implant contact even in the smooth surface implants. Conclusion: Healing of the circumferential defect around dental implant is influenced by the implant surface, defect width and the morphology of the defect. When using rough surface implants, circumferential gap defects within 2 mm do not need any kinds of regenerative procedures and the healing appeared to be faster in the tapered defect morphology than the paralleled one.