• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.593-598
• /
• 2005

Explosions of dangerous goods such as accidents at Iri and Yongcheon Stations bring about a big damage and toss of assets. And leakage of toxic and dangerous materials may cause environmental pollution. Therefore, in developed countries, safely and operation codes for the carriage of dangerous goods were already established. One of the codes is RID: Regulations concerning the International Carriage of Dangerous Goods by Rail. In this study, RID code was analyzed and summarized for the drawing-up of a korean safety standard code.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.1
• /
• pp.9-21
• /
• 2017

Objective: The objective of this study is to understand the effect of angle and curvature of push-return switches, which are external factors in the operation environment inside the cars, on the feel of operation and to propose optimum alternatives. Background: Customers' needs for products are changing from functional and performance aspects to customer-led type where customers can reflect on their needs on the products. The operation inside cars is executed by HMI. The push-return switch is utilized as the most intuitive mode of HMI; therefore, this push-return switch, which is widely used, has to be developed by assessing the preference and satisfaction of the customer. Method: The angle and curvatures, which are external factors that affect the feel of operation, are drawn through surveying the preceding research literatures. The stages to construct alternatives in experiments are as follows: (1) the tactile switch is replaced after dismantling the switch assembly to evaluate the internal characteristics proposed by preceding researches, (2) a drawing is prepared by using a design software, is printed using 3D printer, and then it is attached on the switch assembly, and (3) evaluation for satisfaction of operation is carried out by using a driving simulator. Results: Both the angle and curvature that are external factors of switch significantly affect the feel of operation. However, interaction between the two factors is found insignificant. Therefore, an optimum alternative is proposed considering the experimental outcomes. Conclusion: This study evaluates the satisfaction in operation that affects the feel of operation environment inside the cars. Based on the study results, a guideline for switch design in the center fascia is proposed. Application: This study is expected to be used as basic data for designing automotive switches, as well as switches in the industries similar with the operation environments of cars.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.25 no.4
• /
• pp.93-104
• /
• 2019

Purpose: To establish the building guidelines and to analyze the function of Regional Public Hospitals, the survey was conducted primarily on the current status focusing on the location and relationship of the department, area composition ratio, area per bed, and area per operating room. Methods: The research methods of this paper are as follows. 1) A literature survey on the function of the operating and related departments, 2) A drawing analysis for spatial composition and net area calculation. Results: The area of the Operation Department in the Regional Public Hospitals with 200 to 300 beds are as follows. Area ratio: 3.35%, area per Bed: 2.53㎡/bed, the number of beds per operating room: 64.37bed, area per operating room: 146.46㎡/n, area per operating room by plan type: integration corridor 133.84㎡/n, separation corridor 184.82㎡/n. Implications: This paper analyzed data on the current state of Operation Departments for setting up the function and role for the Regional Public Hospital. In the future, it is also required to provide size that takes into account user behavior and the user's psychological aspect in order to suggest appropriate area.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.3 no.2
• /
• pp.51-74
• /
• 2003

This study has presented construction planning data or material. which can maximize the efficiency of school facilities; in other words, to utilize school facilities as local continuing education facilities in terms of use rate, as well as to make school facilities to accommodate the 7th education curricula. This study has been carried out through questionnaire survey on currently executed various curricular operation types, targeting people in charge of drawing up and operation of the curricula in liberalarts high school. The questionnaire survey has also been conducted on ideal teaching-learning type by subject, targeting teachers in charge of individual subject. The expansion of specialized curricula rooms and classrooms, as well as classrooms by level and ICT-related rooms, are required to invigorate continuing education, which utilizes smooth operation of the 7th education curricula and school facilities. I also assume that implementation of school curricula and the role as local continuing education facilities can be fulfilled, through activated deployment type and operation programs with which management of the facilities becomes easy, in order to utilize those classrooms to be used for continuing education.

• Nuclear Engineering and Technology
• /
• v.48 no.2
• /
• pp.386-403
• /
• 2016

The safety of nuclear power plants is analyzed by a probabilistic risk assessment, and the fault tree analysis is the most widely used method for a risk assessment with the event tree analysis. One of the well-known disadvantages of the fault tree is that drawing a fault tree for a complex system is a very cumbersome task. Thus, several graphical modeling methods have been proposed for the convenient and intuitive modeling of complex systems. In this paper, the reliability graph with general gates (RGGG) method, one of the intuitive graphical modeling methods based on Bayesian networks, is improved for the reliability analyses of dynamic systems that have various operation modes with time. A reliability matrix is proposed and it is explained how to utilize the reliability matrix in the RGGG for various cases of operation mode changes. The proposed RGGG with a reliability matrix provides a convenient and intuitive modeling of various operation modes of complex systems, and can also be utilized with dynamic nodes that analyze the failure sequences of subcomponents. The combinatorial use of a reliability matrix with dynamic nodes is illustrated through an application to a shutdown cooling system in a nuclear power plant.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.2
• /
• pp.44-51
• /
• 1992

This paper is concerned with the propram of the automatic mesh generation for 2-dimensional domain which contains the curved boundaries and holes. This program treats a new vertical-line drawing method. This method starts with 4-subdivisions of problem domain and the classification of the cross points of grid lines and boundaries. The new node is generated by the vertical line to the line connecting the two intersections of a boundary and two grid lines in gereral. And the node very close to the boundary is moved to the boundary. The automatic mesh generation composed of only rectangular elements is achieved by this procedure. The boundaries are piecewise-curves composed of lines, circles, arcs, and free curves. The free curves are generated by B-Spline form. Although there were some bad elements for the complex boundary, it was possible to obtain the acceptible rectangular elements for the given boundaries.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.1
• /
• pp.80-84
• /
• 2012

Recently, the small scale photovoltaic (PV) electronic devices are drawing attention as the upcoming PV generation system. The PV system is commonly used in small scale PV applications such as LED lighting and cell phone. This paper proposes photovoltaic output sensorless (POS) maximum power point tracking (MPPT) control for a small scale charging system of PV-nickel metal hydride battery using field-programmable gate array (FPGA) controller. A converter is connected to a small scale PV cell and battery, and performs the POS MPPT at the battery terminal current instead of being at the PV cell output voltage and current. The FPGA controller and converter operate based on POS MPPT method. The experimental results show that the nickel metal hydride battery is charged by the maximum PV output power.

• Journal of Navigation and Port Research
• /
• v.47 no.2
• /
• pp.93-99
• /
• 2023

This study aimed to determine relationships among risk factors influencing container port operation using Bayesian network. Risk factors identified from prior studies were classified into five groups: human error, machinery error, environmental risk, security risk, and natural disasters. P anel experts discussed identified risk factors to fulfil conditional probability tables of the interdependence model. The interdependence model was also validated by sensitivity analysis and provided an interrelation of factors influencing the direction of each other. Results of the interdependence model were partially in line with results from prior studies while practices in the global port industry confirmed interrelationships of risk factors. In addition, the relationship between top-ranked risk factors can provide a schematic drawing of the model. Accordingly, results of this study can expand the prior research in the Korean port industry, which may help port authorities improve risk management and reduce losses from the risk.

• Journal of the Korean School Mathematics Society
• /
• v.12 no.2
• /
• pp.151-170
• /
• 2009

The purpose of the study is to analyze the sixth graders' understanding of concepts and operation about fraction. The test was administered and analyzed to 707 sixth graders' performance on fractions after the fraction instructions in elementary schools in Seoul, Korea. The participants are asked to answer two sets of questions for 40 minutes. First, they are asked to answer to 16 problems about the concepts of fraction with respect to part-whole, ratio, operator, measure, quotient, equivalent, and operations. Second, specially, to investigate sixth graders' ability of drawing and describing the situation of division including fraction, the descriptive problem asked students (1) to describe $3\;{\div}\;\frac{1}{2}$ into pictorial representation and (2) to write the solving process. The participants of this study didn't show deep understandings about the concepts and operation of fraction. The degree of understanding of subconstructs of fraction shows that their knowledge of ratio concept with respect to fraction was highest while their understanding of measure with respect to fraction was lowest. Considering their wrong answers, about 59% of participants showed misconception to the question of naming one fraction that appears between $\frac{1}{5}$ and $\frac{1}{6}$. Further, they didn't explain their understanding with drawing about the division of fraction ($3\;{\div}\;\frac{1}{2}$).

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.2
• /
• pp.124-133
• /
• 1998

This paper describes a research work of developing a computer-aided design of blanking and piercing for irregular-shaped sheet metal products. An approach to the development of compact and practical CAB system is based on the knowledge-based rules. Knowledge for the CAD system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoLISP on the AutoCAD with a personal computer. Based on knowledge-based rules, the system, STRT-DES, is designed by considering several factors, such as complexities of blank geometry and punch profile, availability of press equipment and standard parts, utilization ratio which minimizes the scrap in a single or a pairwise operation, bridge width, grain orientation and design requirements which maximize the strength of the part when subsequent bending is involved. This system checks a forming feasibility with both internal and external features, a dimension of blanked hole, and a corner and a fillet radius for irregualrly shaped sheet metal products. Therefore this system can carry out a die design for each process which is obtained from results of an automated blank layout drawing with a best utilization ratio for irregular shape of product that was successful in production feasibility check module and those of an automated strip layout drawing and generate part drawings and the assembly drawing of die set in graphic forms.