• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.43-47
• /
• 2006

Since the sheet metal forming of Mg alloy is performing at elevated temperature, the effect of process conditions related with the forming temperature is very important factor. Therefore, the investigation for process variables is necessary to design the tools and process conditions. In this study, the effects of process variables were studied by the experimental and FE analysis using the square cup deep drawing. The temperature, forming speed, and lubricant condition were investigated. When forming temperature was $250^{\circ}C$, speed forming was low, and teflon sheet was used as lubricant, the formed parts were good without defects.

• Journal of the Korean Society of Industry Convergence
• /
• v.17 no.3
• /
• pp.122-135
• /
• 2014

This paper was studied on the horizontal continuous casting of Al-xSi(x=10~15%) aluminum alloy. The experiments of the horizontal continuous casting was carried out by the horizontal continuous casting machine for various casting conditions and investigated on fracture types and mechanisms. Surface defect types for the horizontal continuous casting is also investigated. And the study was carried out that the horizontal continuous casting conditions such as casting temperature, cooling rate, and drawing speed affect the hardness and primary silicon size of Al-xSi(x=10~15%) aluminum rod bar. Casting temperature within this experiment conditions don't affect on the hardness of rod bar but the higher casting temperature is the smaller primary silicon size. The higher cooling rate and drawing speed have the higher hardness and the smaller primary silicon size.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.250-253
• /
• 2007

Since Mg alloy has many attractive advantages among the practically used metals, many researchers have been studied to develop useful process and material. The crystal structure of Magnesium was hexagonal close-packed, so its formability was poor at room temperature. But formability was improved in high temperature with increasing of slip planes, twins, dynamic recrystallization. In this study The formability of AZ31B magnesium sheet is estimated according to the variable temperatures, forming speed, thickness, blank holding force. The results of deep drawing experiences show that the formability is well at the range from 200 to $250^{\circ}C$, 20 to 60 mm/min forming speed and 2.5 to 3KN blank holding force.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.5
• /
• pp.57-64
• /
• 2001

The high speed in the wire-drawing process to meet the demands for the increased productivity has a great effect on the heat generated due to plastic deformation and friction between the wire and the drawing dies. During the high carbon steel wire drawing process, the temperature rise gives a great influence to the fracture of wire. In this paper, to control the temperature rise in the wire after the deformation through the drawing die, the calculation method of the wire temperature, which includes the temperature rise in the deformation zone as well as the temperature drop in the block considering the heat transfer among the wire, cooling water and surrounding air, is proposed. These calculated results of the wire temperature at the inlet and exit of the drawing die at each pass are compared with the measured wire temperatures and verified its efficiency. So, using the program to predict the wire temperature, the isothermal pass schedule program was developed. By applying this isothermal pass schedule program to the conventional process condition, a new isothermal pass schedule is redesigned through all passes. As a result, the possibility of wire fracture could be considerably reduced and the productivity of final product could be more increased than before.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1381-1387
• /
• 2015

This paper proposes a sketch drawing system called m-shaper for musical shape generation. Through simple sketch drawing, users can generate musical shape configuration which can be played by a computer. One key ingredient of the process is a unique concept for the interactive musical shape generation that combines shape and sound based on the designers' manual inputs. m-shaper captures the numerical values of drawing characteristics and determines how the musical notes and shapes can be generated. Using a tablet, four sketch movements are captured such as pressure, tilt, rotation and speed. Each point of a shape corresponds to a certain musical note that represents a type of instrument, duration, pitch, and octave. The current m-shaper has been developed as a computational tool for supporting the schematic design process. Designers in m-shaper draw geometric sketches with a musical inspiration and explore possible conceptual forms. They also can control the parameters for results and transform their sketch drawing.

• Design & Manufacturing
• /
• v.12 no.3
• /
• pp.42-47
• /
• 2018

Recently, in the surge of global environmental issues, there has been a great attention to lightweight materials in purpose of saving energy. Magnesium alloys not only have low specific gravity, and superb specific stiffness, but are also excellent in blocking vibrations and electromagnetic waves. So demand for this material is getting bigger rapidly throughout the industry. In this study, we examined the improvement of formability of magnesium alloy AZ31 material in warm working. Drawing, bending and shearing process were carried out by varying the forming temperature and the forming speed, and the influence of the variables on each process was studied. In the experiments, the high forming temperature and low forming speed results in high formability in the drawing process and the bending process. In the shearing process, as the forming temperature increases, the length of the fracture decreases.

• Journal of applied mathematics & informatics
• /
• v.7 no.2
• /
• pp.629-640
• /
• 2000

this paper present an efficient line-drawing algorithm that reduces the amount of space required, Because of its efficiency , this line-drawing algorithm is faster than the Bresenham algorithm or the recursive bisection method. this efficiency was achieved through a new data structure; namely , the modified segment tree (MST). Using the modified segment tree and the distribution rule suggested in this paper, we dra lines without generating the recursive calls used in [3] and without creating the binary operation used in [4]. we also show that line accuracy improves in proportion to the display resolution . In practice, we can significantly improve the algorithm's performance with respect to time and space, This improvement offer an increase in speed, specially with lines at or near horizontal, diagonal. or vertical ; that is, this algorithm requires the time complexity of (n) and the space complexity O(2k+1), where n is the number of pixels and k is a level of the modified segment tree.

• Transactions of Materials Processing
• /
• v.17 no.7
• /
• pp.473-480
• /
• 2008

Sheet metal forming of Mg alloy is usually performed at elevated temperature because of the low formability at room temperature. Therefore, strain rates affected with the forming temperature and speed must be considered as important factor about formability. Effects of process parameters such as various temperatures and forming speeds were investigated in circular cup deep drawing. From the experimental results, it is known that LDR (Limit Drawing Ratio) increase as the strain rate increase. On the contrary, the FLD (Forming Limit Diagram) shows lower value as faster strain rate. Therefore, anisotropy values are investigated according to the temperature and strain rates at each forming temperature. R-values also represent higher value as faster strain rate. It is known that the formability can be different with the deformation mode on warm forming of AZ31 alloy sheet.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.11a
• /
• pp.91-92
• /
• 2007

• Proceeding of EDISON Challenge
• /
• 2017.03a
• /
• pp.566-573
• /
• 2017

Develop a leg walking robot with 'Janssen mechanism'. Using 'ScienceBox' base and add more items to improve moving speed and balance of the robot. To make the robot better, made optimized drawing and produced it using plastic with 3D printer and acyrl with Laser cutting machine.