• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.730-733
• /
• 2001

A computer aided design system for spur, helical, bevel and worm gears by using AutoCAD system and its AutoLISP computer language was newly developed in this study. Two methods are available for a designer to draw a gear. The first method needs the gear design parameters such as pressure, module, number of tooth, shaft angle, velocity, materials, etc. When the gear design parameters are inputted, a gear is drawn in AutoCAD system and maximum allowable power and shaft diameter are calculated additionally. The second method calculates all dimensions and gear design parameters to draw a gear when the information such as transmission, reduction ratio, rpm, materials and pressure are inputted. The system includes four programs. Each program is composed of a data input module, a database module, a strength calculation module, a drawing module, a text module and a drawing edit module. In conclusion, the CAD system would be widely used in companies to find the geometric data and manufacturing course.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.7
• /
• pp.865-873
• /
• 2013

The deep drawing and ironing (DDI) process involving the use of a high-capacity horizontal press is used for manufacturing acompressed natural gas (CNG) pressure vessel. However, some variables of the DDI process have been determined based on the experiences of workers, and the short die life needs to be improved for manufacturing the pressure vessel withhighquality and lowcost. In this study, process variables such as the draw ratio, distance between dies, radius of rounding of drawing die, and angle of ironing die are chosen to enhance the reliability and improve the die life based on previous studies and experiences. The draw ratio limits at which no tearing or wrinkling occurs are determined using FEA, and the distances between dies, radius of rounding of drawing die, and angle of ironing die are optimized by the DOE method. The results of the optimal process variables are compared with those of the existing DDI process for verifying their effectiveness.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.683-686
• /
• 1995

The automatic solid reconstruction is one of the important problems in CAD. Nowadays solid reconstruction has been done many areas, we will proposed this algorithm contribute to that development. this paper presents the algorithm to automatically reconstruct the soild form a set of the orthogonalal three views.

• Journal of the Korean Home Economics Association
• /
• v.39 no.10
• /
• pp.97-109
• /
• 2001

It is thought that a composition of trousers is related to fabrics with single breadth. Therefore, trousers are designed with pattern using this fabrics with single breadth. However, in the old pattern of trousers, the breadth of 33cm-35cm was not considered in designing patterns. In this context, deciding which pattern design is better is not easy as there are a variety of estimation methods. So in this study, standardization of drafting is pursued by an objective pattern design. For this, a base angle of the trouser closely relating to a form and function was measured and using the height and the base angle, a trouser pattern design was tried. For a measurement of the base angle, 5 subject were selected. They are 25-29 year-old male graduates with fine physical standard. The base angle was measured with symphysis pubis point as a standard when subjects sat with their legs crossed, when they stood with their legs open (not forced artificially) and when they laid down with their legs open. The distance between a knee inside joint and knees was measured three times and the resultant value was used for the pattern design. For a design of trousers, the height was applied and the base angle was fixed. As a pattern drawing, using the height, a base angle and circumference of the hip, a trouser was designed. The production method for the pattern design is as follow: (1) The length formula, is height + $\frac{height}{2}$ (2) The hip girth formula is $\frac{hipgirth}{2}$ - $\frac{hipgirth}{20}$(3) A crotch angle is fixed at $72^{\circ}$. (4) The ratio of outer leg length to leg width is 5 : 8. (5) The component ratio of the upper outer leg length to the pant length is 5 : 8. (6) The ratio of the division point of front right inner leg length and left inner width to upper outer leg length is 5 : 8.

• Journal of The Korean Society of Integrative Medicine
• /
• v.8 no.2
• /
• pp.1-9
• /
• 2020

Purpose : The aim of this study was to compare the effects of the abdominal draw-in exercise (ADIE) and the dead bug exercise (DBE) on the pelvic anterior tilt angle and the activities of the gluteus maximus (GM), erector spinae (ES), and semi tendinosus (ST) during prone hip extension. Methods : A total of 22 female adults with weak abdominal muscles were divided into two groups: ADIE group (n=11) and DBE group (n=11). The muscle activities of the GM, ES, and ST along with the pelvic anterior tilt angle during prone hip extension were measured using a wireless surface electromyograph and gyro sensor before performing the prescribed exercise. Two groups conducted the assigned exercise for 10 minutes. After the exercise, their muscle activities and the pelvic anterior tilt angle were equally re measured. Results : In the DBE group, the muscle activity of GM was significantly increased after the intervention (p<0.05). However, there was no significant difference between the two groups in the amount of increase in the activity of GM (p>0.05). Moreover, in both groups, the activity of ES and the pelvic anterior tilt angle decreased significantly after the intervention (p<0.05) The decreased quantity in the pelvic anterior tilt angle and in the activity of ES showed no difference between the two groups (p>0.05). In the activity of ST, there was no significant difference within and between the two groups (p>0.05). Conclusion : Therefore, we suggest that ADIE and DBE are effective for women with weak abdominal muscles since the ES activity and pelvic anterior tilt angle are reduced during prone hip extension.

• Journal of The Korean Society of Integrative Medicine
• /
• v.7 no.1
• /
• pp.19-26
• /
• 2019

Purpose : The aim of this study was to investigate the effects of the abdominal draw-in (ADI) exercise on the onset times of the gluteus maximus (GM) and erector spinae (ES) as well as the pelvic anterior tilt angle during prone hip extension (PHE). Methods : A total of 24 female adults were divided into two groups: those with normal abdominal muscles (n=12) and those with weak abdominal muscles (WAM; n=12). Before the intervention, the onset times of the GM and ES along with the pelvic angle during PHE were measured. Subsequently, the participants conducted the ADI exercise for 10 minutes. After conducting the ADI exercise, the onset times and the pelvic angle were re-measured. Results : In the pre-intervention comparison between the two groups, the WAM group showed faster ES onset times and higher pelvic angle than the normal group (p<0.05). In the WAM group, the ES onset times were significantly delayed after the ADI exercise (p<0.05). In both groups, the pelvic angle was significantly decreased after the ADI exercise (p<0.05). The decrease in the pelvic angle was significantly greater in the WAM group than in the normal group (p<0.05). The GM onset time was found to be not significant in all comparisons (p>0.05). Conclusion : Therefore, it can be concluded that after performing the ADI exercise, the pelvic anterior tilt during PHE is decreased in normal women and those with WAM, especially in the WAM group, suggesting that the ADI exercise can reduce the compensatory pelvic anterior tilt more effectively by delaying the ES onset times.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.286-291
• /
• 2001

This study is an introduction of ADS in which we have written out programs which can design three-dimensional machine parts and reduce the required time for design them comparing with other CADs. Among the machine parts, screws are commonly used in joining one part to another because of easy handing but welding and rivet are used to join permanently them even thought hard operation. Consequently, we have developed the screw fer permanent fixing using stairs type screw threads, which is considered as the main machine parts in joining. For that, we designed permanent fastened screws according to the different rotation angle using VisualLISP and transferred it to ANSYS, structural solution program, to find out allowance load, maximum equivalent stress and where it occur.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.628-632
• /
• 2000

In the recent day, shielding can was made of permalloy materials for automobile display instrument. The good roundness has an effect on magnetic property such as the low coercivity and the high permeability. But the products having the roundness is transformed by the heat treatment, the sending to the company and the assembly process. So for the stiffness of the edge, it is necessary for hemming process to be added in the deep drawing process. And it has the good appearance to create a smooth edge rather than a razor edge with urr. In this paper, it is controlled to get the best hemming product by the Pre-hemming angle($105^{\circ}$, $120^{\circ}$, $135^{\circ}$). And Possible process and tool design modification, which may lead to quality improvement in hemming were tested experimentally and using FEM. The commercial finite element program PAM-STAMPTM was used to simulate the pre-hemming process and hemming process, and the predictions were compared with experimental results according to the pre-hemming angle.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.827-833
• /
• 2001

This study is an introduction of ADS in which we have written out programs which can design three-dimensional machine parts and reduce the required time for design them comparing with other CADs. Among the machine parts, screws are commonly used in joining one part to another because of easy handing but welding and rivet are used to join permanently them even thought hard operation. Consequently, we have developed the screw for permanent fixing using stairs type screw threads, which is considered as the main machine parts in joining. For that, we designed permanent fastened screws according to the different rotation angle using VisualLISP and transferred it to ANSYS, structural solution program, to find out allowance load, maximum equivalent stress and where it occur.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.1003-1007
• /
• 1997

This study is na introduction of ADS in which we have written out programs which can design three-dimensional machine parts and reduce the required time for design them comparing with other CADs. Among the machine parts, screws are commonly used in joining one part to another because of easy handling but welding and rivet are used to join permanently them even thought hard operation. Consequently, w have developed the screw for permanent fixing using stairs type screw threads, which is considered as the main machine parts in joining. For that, we designed permanent fastened screws according to the different rotation angle using VisualLISP and transferred it to ANSYS, structural solution program, to find out allowance load, maximum equivalent stress and where it occur.