• 제목/요약/키워드: Drain method

검색결과 522건 처리시간 0.028초

연약지반 개량을 위한 석션드레인공법의 적용 사례 (A Case Study on the Suction Drain Method for Soft Ground Improvement)

  • 김도형;김병일;한상재;이재주
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2009년도 춘계 학술발표회
    • /
    • pp.743-749
    • /
    • 2009
  • In this study, the field test for suction drain method which does not require a surcharge load and a sealing sheet was performed at west seashore's site constructed by the dredged and reclaimed clay. The improvements of soft ground by suction drain method was analyzed by the results of real-time field measurement, SPT(Standard Penetration Test) and laboratory tests. The results indicated that the soft ground improvement is effective the vertical drain method used with vacuum pressure rather than surcharge load with considering settlements, dissipation of pore water pressure and shear strength.

  • PDF

Cylindrical 구조를 갖는 LDMOS의 Drain 역방향 항복전압의 계산 방법 (The Calculation Method of the Breakdown Voltage for the Drain Region with the Cylindrical Structure in LDMOS)

  • 이은구
    • 전기학회논문지
    • /
    • 제61권12호
    • /
    • pp.1872-1876
    • /
    • 2012
  • A calculation method of the breakdown voltage for the drain region with the cylindrical structure in LDMOS is proposed. The depletion region of the drain is divided into many smaller regions and the doping concentration of each split region is assumed to be uniformly distributed. The field and potential in each split region is calculated by the integration of the Poisson equation and the ionization integral method is used to compute the breakdown voltage. The breakdown voltage resulted from the proposed method shows the maximum relative error of 2.2% compared with the result of the 2-dimensional device simulation using BANDIS.

Sand Drain 공법에 의한 작업시 발생하는 건설소음의 특성에 관한 연구 (A Study on the Characteristics of Construction Noise by Sand Drain Method)

  • 윤해동;김재수
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2000년도 추계학술대회논문집
    • /
    • pp.500-505
    • /
    • 2000
  • Recently, with the increasing of construction works, large construction equipment are used to reduce the term of work and labor cost in construction field. Therefore, construction equipment noise has caused much annoyance for a number of dweller in nearby construction field and it has become a very serious problem in our living environment. Neverthless, in our country, adequite guidelines for the construction equipment noise are very deficiency because of the lack of basic data and insufficient research works. From this point of view, this study attempts to survey the characteristics of attenuation and propagation of Sand Drain Method in construction field. On the basis of measurement value, we analysed about prediction possibility of Sand Drain Method. This study also present a basic data found a effective plans for Sand Drain Method.

  • PDF

석션드레인공법이 적용된 연약지반의 압밀특성에 관한 사례 분석 (Consolidation Characteristics of Soft Ground in Suction Drain Method)

  • 김병일;김도형;김수삼;한상재
    • 대한토목학회논문집
    • /
    • 제29권6C호
    • /
    • pp.287-294
    • /
    • 2009
  • 석션드레인공법은 지반 내 배수재를 타설하고 진공압을 배수재에 직접 가해 전응력이 일정한 상태에서 간극수를 배출하여 유효응력을 증가시키고 이로 인해 전응력의 변화 없이 강도를 증진하고 압밀 촉진을 유도하는 새로운 연약지반 개량 공법이다. 본 논문에서는 서해안 해성 점성토 지반에 적용된 석션드레인공법의 시공 사례를 제시하였다. 석션드레인공법이 적용된 지반의 개량효과를 확인하기 위해 현장 계측과 실내시험 결과를 분석하였으며, 수치해석을 통해 설계치와 실측치를 비교하였다. 석션드레인공법과 기존 성토재하공법의 침하량 비교결과 기존 성토재하공법을 대체할 수 있는 침하거동이 발생함을 확인 하였다. 현장 계측 및 실내시험을 통해 지반개량 효과를 분석한 결과 석션드레인공법 적용 지반의 침하량이 2.3배 더 크게 발생함을 확인하였으며, 개량 후 비배수 전단강도는 약 300~400% 증가하였다. 또한 함수비는 약 30% 감소하였으며, 선행압밀하중은 약 $0.52kgf/cm^2$ 정도가 증가하였다.

배수효율이 높은 지하암거의 간격과 주름유공관의 통수능 비교분석 (A Comparative Study on the Spacing and Discharge Performance of Subsurface Drainage Culvert to Increase Drainage Efficiency)

  • 김현태;유전용;정기열;박영준
    • 한국농공학회논문집
    • /
    • 제61권6호
    • /
    • pp.67-72
    • /
    • 2019
  • This study compared the theory of a culvert spacing and analytical results of the seepage flow for the subsurface drainage. i) If culvert spacing (Sc) is within 5 m, the unit drainage (q) is very larger; in contrast, if Sc is 5 m or more, there is very little drainage in the middle between drains. Therefore, the drain spacing should be within 5 m to ensure high drainage efficiency. ii) Since the planned culvert drainage increases linearly with the soil's permeability coefficient (k), k must be taken into account when determining the drain diameter by the planned culvert drainage. iii) As a result of analyzing the drainage performance of the absorbing culvert, the drainage performance is sufficient with the diameter of the corrugated drain pipe Dc = 50 mm at the length of the drain Lc = 100 m. iv) Therefore, if the drain spacing (Sc) is less than 5 m using the low-cost non-excavated drainage pipe method (${\Phi}50mm$ the corrugated drain pipe and fiber mat) rather than the conventional trench drain method (Sc > 10 m, Dc > 100 mm), uniform and high drainage efficiency can be ensured as well as low construction cost. v) The sub-irrigation+drainage culvert requires narrower drain spacing (Sc < 2-3 m) for irrigation. As a result of examining the condition of 35 mm in diameter (Dc) and 2~3 m in drain spacing, it is possible to apply the non-excavated drainage pipe method to the sub-irrigation+drainage culvert because drainage performance is sufficient at the drain length Lc = 50 m.

Direct Printing법에 의해 제작된 OTFT용 source & drain 전극용 전도성 페이스트 제조 (The Manufacture of Conductive paste for OTFT source & drain contacts Fabricated by Direct printing method)

  • 이미영;남수용;김성현
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
    • /
    • pp.384-385
    • /
    • 2006
  • We studied about conductive pastes of the source-drain contacts for OTFTs(organic thin-film transistors) fabricated by direct printing(screen printing) method. We used Ag and conductive carbon black powder as the conductive fillers of pastes. The conductive pastes were manufactured by various dispersing agents and dispersing conditions and source-drain contacts with $100{\mu}m$ of channel length were fabricated. We could obtain the OTFTs which exhibited different field-effect behaviors over a range of source-dram and gate voltages depending on a kind of conductive fillers used conductive pastes.

  • PDF

접합요소에 의한 Vertical Drain Well 지반의 변형해석 - 모델지반과 실제 Sand Drain Well 지반을 중심으로 - (Deformation Analysis of Soft Foundation with Vertical Drain Wells using the Interface Element Method -With Emphasis on Model Foundation and Actual Sand Drain Well Foundation-)

  • 이진수
    • 대한토목학회논문집
    • /
    • 제13권4호
    • /
    • pp.227-237
    • /
    • 1993
  • 본 연구는 vertical drain well 설치지반의 보다 더 실제적이고 합리적인 변형해석을 목적으로 drain well 타설로 인하여 발생하는 well 주변 점토층의 교란(smear)영향, well과 인접점토층의 강성차이에서 오는 접합면 변형의 불연속거동 표현이 가능한 유한요소해석 방법을 제시하고자 하는데 목적이 있다. 유한요소해석의 구성은 변형의 지배방정식으로서 Biot의 압밀이론을 근간으로 여기에 흙의 구성식과 접합요소이론을 결합하여 이루어진다. 본 논문에서 제시한 해석법의 정도는 Siriwardane과 Ghaboussi 등이 사용한 지반에 적용하여 검증한 바 있다. 여기에서는 이를 다시 모델지반과 실제지반에 대해서 유한요소해석법을 적용하여 강성이 다른 이질재료간 경계에서의 불연속변형의 영향에 따른 지반내 거동특성을 살펴보고 이것을 함께 고려한 해석법의 정도를 알아보고자 한 것이다. 그 결과는 침하에 있어서 매우 만족스럽다고 보아지지만 간극수압등에는 잘 일치하지 않는 점이 있어 앞으로의 더 많은 연구가 필요하다고 판단된다.

  • PDF

연약지반의 불확실성을 고려한 연직배수공법의 신뢰성 설계 (Reliability-Based Design of Vertical Drain Method Considering Uncertainties in Geotechnical Property)

  • 김병일;사상호;김방식;김수삼
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2006년도 춘계 학술발표회 논문집
    • /
    • pp.1148-1154
    • /
    • 2006
  • Composite discharge capacity tests and smear effect tests are carried out to estimate the parameters for the reliability-based design of vertical drain method. Also the probabilistic and deterministic solutions of radial consolidation theory are presented. It compared to the result of reliability-based design and that of deterministic design using the tested and estimated parameters. The results indicated that the drain spacing is larger the deterministic method than the probabilistic method because the former is not considered the uncertainties in the properties of soil. The divergence of methods is dependent on the probability of achieving target degree of consolidation by a given time and the coefficient of variation(COV) of the coefficient of horizontal consolidation$(c_h)$.

  • PDF

원심모형실험을 이용한 터널 측방배수관에 퇴적되는 침전물 저감방안 연구 (A study on the Reduction Scheme of Sediments Deposited on a Lateral Drain Pipe in Tunnel using Centrifugal Tests)

  • 김태영;김유석;박종관
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2006년도 추계학술대회 논문집
    • /
    • pp.1380-1384
    • /
    • 2006
  • Sediments deposited on lateral drain pipes in a tunnel make lateral porous pipes clogged. Since the safety of the tunnel can be affected by this phenomenon, it requires a regular maintenance of the lateral drain pipes. In this study, a series of centrifugal tests were conducted in order to find out the method which can reduce the clogging effect considerably. Four different types of tunnel drain configurations were selected in the experiments. By analysis of sediments for each configuration, the optimum drain configuration that can minimize sedimentation of cement constituents was investigated. As a results, the existing drain configuration which uses filter concrete appear to produce much sediments. In contrast, the new drain configuration appears to be able to reduce sedimentation ratio up to almost 50% comparing with the existing one. From these observations, it may be concluded that the new drain configuration, in which the lateral porous pipes of a tunnel are surrounded by gravel layer and non-woven geotextile, has high efficiency in maintenance.

  • PDF

실내모형실험을 통한 PBD공법이 적용된 대심도 연약지반 개량에 관한 연구 (A Study on the Soft Ground Improvement in Deep Depth by Application of PBD Method Using Model Test)

  • 변요셉;안병제;천병식
    • 한국지반환경공학회 논문집
    • /
    • 제10권6호
    • /
    • pp.69-77
    • /
    • 2009
  • 연약지반은 해성점토, 실트질, 사질토 등과 같은 지반으로 항만, 공항, 교량과 같은 구조물의 축조시 지지력 부족 및 침하, 전단변형 등의 문제점을 가진다. 이러한 문제점을 개선하고 연약지반의 조기 침하 및 강도증진을 위해 다양한 지반개량공법들이 적용되고 있으며 연약지반의 압밀에 소요되는 시간을 단축시키기 위해 연직배수공법이 많이 사용되고 있다. 특히, 연직배수공법에서 가장 많이 사용되는 배수재는 PBD(Plastic Board Drain)이다. 본 연구에서는 대심도 연약지반에 적용될 PBD공법에 대해 복합통수능실험을 실시하여 거동특성을 평가하였다. 그 결과, 상재압력의 증가에 따라 침하는 점진적으로 발생하였으며, 상재압력 $500kN/m^2$ 이후에는 간극수압의 소산에 따라 압밀침하가 진행되었다. 따라서 재하단계별 침하량의 변화는 간극수압의 소산에 따른 것임을 확인할 수 있었다. 또한, 연직 배수재의 통수능은 압력이 증가할수록 또 시간이 경과함에 따라 현저히 감소함을 알 수 있었다.

  • PDF