• 멤브레인
• /
• 제29권1호
• /
• pp.61-65
• /
• 2019

이방성 입자는 독특한 물리적 특성 때문에 다양한 분야에서 발표되고 있다. 여기서, 이방성 도토리구조 나노 입자를 제조하기 위해 새로운 동적 상분리 방법이 도입된다. 동적 상분리 방법은 용제 증발 및 무용제에 의한 침전으로 구성된다. 하부층은 비용매 희석제로서 물을 공급함으로써 제어되며, 상부층의 상분리는 휘발성 용매의 확산 및 증발에 의존한다. 이 상태에서, 도토리 형 입자가 제조되었다. 물이 채워진 밀폐된 상자(자발적 상분리)하에서, 단분산 폴리스틸렌 입자가 합성되었다. 동적 상분리와 자발적 상분리가 공존할 때, 캡과 입자의 크기가 변경되었다. 또한, 폴리스틸렌 용액의 부피는 입자 형상에 영향을 미친다. 독특한 구조가 다양한 응용 분야에 활용될 수 있기 때문에 멤브레인 기반의 제어된 물 공급과 같은 첨단 기술이 개발되면 단분산의 도토리와 같은 입자가 제조될 수 있을 것이다.

• 한국해양학회지:바다
• /
• 제13권3호
• /
• pp.246-251
• /
• 2008

심해저 망간단괴 집광시스템(이하, 집광시스템)의 개념설계가 공리적 설계(Axiomatic Design)의 관점에서 평가되었다. 또한 이미 수행된 집광시스템의 개념설계에 대해 기능적 영역의 기능요구와 물리적 영역의 설계파라미터가 구체화되었다. 기능요구와 설계파라미터의 상호관계는 첫 번째 수준 계층에서 하위 수준 계층으로 순차적으로 분석되었다. 이러한 상호관계는 설계행렬의 형태로 표현되었고 기능요구와 설계파라미터 사이의 독립성을 판단하기 위한 지표로 사용되었다. 설계행렬의 분석결과 본 집광시스템은 설계파라미터간에 연성이 되지 않는 비연성화된 설계임이 확인되었다. 결과적으로, 본 집광시스템은 독립공리(Independence Axiom)를 만족하는 잘된 설계임이 개념적으로 입증되었다.

• 대한조선학회논문집
• /
• 제38권2호
• /
• pp.33-43
• /
• 2001

드릴쉽과 셔틀탱커등 특수선의 건조가 활발해지면서 정해진 위치에서 장시간 작업해야 할 목적으로 동적 자기위치 유지시스템(Dynamic Positioning System)을 장착하는 선박이 늘어나고 있다. 본 논문에서는 DP 시스템의 구성 요소를 소개하고, 수조에서 실험한 결과를 바탕으로 제어이론과 필터이론에 따른 DP성능을 비교하였다. 실험에 사용한 선박은 10만톤급 드릴쉽으로 모델의 길이가 4m이며, 방향이 고정된 3개의 추진기를 사용하였다. 실험 내용은 명령에 따라 주어진 궤적을 이동하는 능력과 파도가 있는 외란조건에서 원하는 선수각을 유지할 수 있는지를 살펴보았다. 추진력을 구하기 위하여 PID 이론을 적용하였고, 제어게인의 변화에 따른 제어특성을 살펴보았다. 선형운동성분과 계측잡음을 제거하기 위하여 칼만 필터와 디지털 필터를 적용하였고, 각각의 필터성능을 비교 검토하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.300-304
• /
• 2007

The reactor head structure assembly(RHSA) is the structure located on the reactor assembly. The purpose of the assembly is providing interface location for cables, preventing pipe whips, prohibiting instruments from becoming missiles, and restraining CEDMs' horizontal motion. On the RHSA, reactor disconnect panels(RDP) are installed. The installation location of RDP is to be decided to minimize the geometric interface with other components. Since the neighborhood of RHSA is crowded due to many connectors and cables, it is necessary to find the good design of RHSA to make an intricate situation attenuated and the required function maintained. The geometric shape and overall configuration of RHSA are determined by axiomatic design approach. The FRs of RHSA are specified and the corresponding DPs are found to satisfy FRs in sequence. The finite element analysis is carried out based on the result of the axiomatic design to evaluate the structural integrity.

• International Journal of Aeronautical and Space Sciences
• /
• 제11권2호
• /
• pp.126-130
• /
• 2010

This paper presents the conceptual design of a multi-rotor unmanned aerial vehicle (UAV) based on an axiomatic design. In most aerial vehicle design approaches, design configurations are affected by past and current design tendencies as well as an engineer's preferences. In order to design a systematic design framework and provide fruitful design configurations for a new type of rotorcraft, the axiomatic design theory is applied to the conceptual design process. Axiomatic design is a design methodology of a system that uses two design axioms by applying matrix methods to systematically analyze the transformation of customer needs into functional requirements (FRs), design parameters (DPs), and process variables. This paper deals with two conceptual rotary wing UAV designs, and the evaluations of tri-rotor and quad-rotor UAVs with proposed axiomatic approach. In this design methodology, design configurations are mainly affected by the selection of FRs, constraints, and DPs.

• 제어로봇시스템학회논문지
• /
• 제19권9호
• /
• pp.846-852
• /
• 2013

In this paper, the authors propose a new approach to control problem of the marine vessels which are moored or controlled by actuators. The vessel control problem in the specified area is called a DPS (Dynamic Positioning System). The main objective of this paper is to obtain more useful control design method for DPS. In this problem, a complicate fact is control allocation which is a numerical method for distributing the control signal to the controlled system. For this, many results have been given and verified by other researchers using two individual processes. It means that the controller design and control allocation design process are carried out individually. In this paper, the authors give more sophisticated design solution on this issue. In which the controller design and control allocation problem are unified by a robust controller design problem. In other word, the stability of the closed-loop system, control performance and allocation problem are unified by an LMI (Linear Matrix Inequality) constraint based on $H_2/H_{\infty}$ mixed design framework. The usefulness of proposed approach is verified by simulation with a supply vessel model and found works well.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 총회 및 춘계학술발표회
• /
• pp.308-311
• /
• 2005

[ $^{222}Rn\;and\;^{226}Ra$ ] in groundwater were determined simultaneously using a gamma-spectroscopy. A nitrogen flushing equipment has been used for elimination and stabilization of high and unstable background activity due to the radon and its progenies in counting shield and room. The aim of present work was to control the background activity for simultaneous measurement of radium$(^{226}Ra)$ and radon$(^{222}Rn)$ in groundwater using a gamma-spectrometry. Background activity was about 1.0dps and the standard deviation was about 50%, The background activity could be minimized using nitrogen flushing equipment in the range of 0.1 to 0.5 and the RSD was about 5% at the experimental condition. The detection limit of $^{222}Rn\;and\;^{226}Ra$ in groundwater was 0.5dps/L in the background control method. In most groundwater used in the work, radon activity was more than the detection limit. However, radium activity in some groundwater was less than the detection limit. If the low level radium in groundwater must be measured, preconcentration process such as concentration should be performed before measuring the groundwater.

• Preventive Nutrition and Food Science
• /
• 제19권4호
• /
• pp.358-362
• /
• 2014

Flow and dynamic rheological properties of hot thickened soups for consumption by the elderly people with swallowing difficulty (dysphagia) were investigated at a serving temperature of $60^{\circ}C$. In this study, sea mustard soup (SMS) and dried pollock soup (DPS), which have been widely known as favorable hot soups provided in a domestic hospitals and nursing homes for dysphagic patients, were thickened with four commercial xanthan gum (XG)-based food thickeners (coded A~D) marketed in Korea. Thickened soups prepared with different thickeners showed high shear-thinning flow behaviors (n=0.15~0.21). Apparent viscosity (${\eta}_{a,50}$), consistency index (K), storage modulus (G'), and loss modulus (G") demonstrated differences in rheological behaviors between the XG-based thickeners. The magnitudes of (G') were much higher than those of (G") over the entire range of frequency (${\omega}$) with the high dependence on ${\omega}$, showing the rheological behavior similar to a weak gel. In general, all rheological parameter values of thickened DPS samples were higher when compared to the thickened SMS samples. These results indicate that flow and dynamic rheological properties of hot thickened soups containing commercial XG-based thickeners are strongly dependent on the type of thickener and soup.

• 한국정보처리학회논문지
• /
• 제6권12호
• /
• pp.3456-3468
• /
• 1999

기존에 제안된 대부분의 병렬 조인 알고리즘들은 데이타베이스가 여러 처리 노드에 분할되어 저장되는 데이타베이스 분할 시스템을 가정하였다. 데이타베이스 분할 시스템은 다수의 노드들을 연결할 수 있으며 지리적으로 분산된 환경도 지원할 수 있다는 장점을 갖지만, 데이타베이스 공유 시스템에 비해 부하 분산이나 시스템 가용성이 떨어진다는 단점을 갖는다. 본 논문에서는 데이타베이스 공유 시스템의 특성을 이용한 동적 부하분산 기법을 제안하고, 제안한 동적 부하분산 기법을 이용하여 기존의 해쉬 조인 알고리즘들을 데이타베이스 공유 시스템에 확장한다. 그리고, 다양한 시스템 구성 및 데이터베이스 부하 환경에서 모의 실험을 수행함으로써 데이타베이스 공유 시스템에서 동적 부하분산 기법의 효과 및 해쉬 알고리즘들의 성능 차이를 정량적으로 분석한다.

• 펄프종이기술
• /
• 제42권5호
• /
• pp.62-66
• /
• 2010

Cellulosic materials were dissolved by NMMO(N-methylmorpholine-N-oxide) and CED (Cupriethylene diamine), respectively, to measure their DPs (degrees of polymerization) by using viscometer. We changed cellulose DPs by applying various amounts of low intensity electron-beam radiation to the cellulosic materials. NMMO is environmental-friendly, non-toxic, and biodegradable organic cellulose solvent and used industrially because of its high cellulose dissolving power and high solvent recovery ratio. The cellulose DP measurement results using these two different chemicals were correlated highly ($R^2$ >0.95). It was also found that cellulose with high DP was dissolved more easily in NMMO than CED. In addition, NMMO method gave more higher resolution in the measurement.