• Korean journal of applied entomology
• /
• v.57 no.4
• /
• pp.347-354
• /
• 2018

In order to setting the control standard of Chinese cabbage pests using a drone, the downward wind speed, spraying width, and the number of falling particles and particle size were examined using a water sensitive paper with spray different heights (3, 4, 5 m) and flying speeds (3, 4 m/sec). Fore kinds of pesticides for aviation control were used to test the perfect lethal concentration and dose for major pests of Chinese cabbage such as Plutella xylostella, Spodoptera exigua and Spodoptera litura. The number of falling particles in spraying pesticides with drones was 80.5% on the upper side, 14.8% on the vertical side, and 4.7% on the back side. The number of falling particles as different spray heights were 3 m = 53, 4 m = 40 and $5m=39particles\;cm^{-2}$. The number of falling particles as different flying speeds were $3m\;sec^{-1}=62$ and $4m\;sec^{-1}=25particles\;cm^{-2}$. In the laboratory test, the perfect lethal concentration and dose of Plutella xylostella was chlorfenapyr SC (20 times, $0.5{\mu}l$) and bistrifluron chlorfenapyr SC (25 times, $0.5{\mu}l$). The perfect lethal concentration and dose of Spodoptera exigua was chlorfenapyr SC (20 times, $1{\mu}l$), bistrifluron chlorfenapyr SC (20 times, $1{\mu}l$), and chlorfenapyr SC (20 times, $1{\mu}l$) and bistrifluron chlorfenapyr SC (20 times, $0.5{\mu}l$) for Spodoptera litura. Therefore, the main pest control method of Chinese cabbage using drones is 20 times diluted chlorphenapyr SC or bistrifluoruron-chlorphenapyr SC, sprayed at 3 m height by $3msec^{-1}$ of going speed. This spraying method will be effective for control of Chinese cabbage pest.

• Journal of Bio-Environment Control
• /
• v.32 no.2
• /
• pp.89-96
• /
• 2023

This study was conducted to apply with an air duct for the cooling and a utilizing cultivating method that uses the fruiting node and the defoliation to the high-temperature vertical and hydroponic cultivation of the oriental melon. The lower fruiting node (LF) was to remove all third vines generated from 5 nodes of a secondary vine. The higher fruiting node (HF) was fruiting on the third vine generated from a first node of the third vine. The direction of the stem string; upward (UW), downward (DW). Four treatment conditions were applied with the LF-UW, LF-DW, HF-UW (control), and HF-DW. The leaf age of melon leaves was measured for photosynthesis at 3 days intervals, and the fruit characteristic was conducted on 79 fruits in each treatment. The photosynthesis rate steadily increased after leaf development, reaching 20.8 μmol CO₂·m^-2·s^-1 on the 10 days, gradually increasing to 21.3 μmol CO₂·m^-2·s^-1 on the 19 days, and reaching 23.4 μmol CO₂·m^-2·s^-1 on the 32 days. After that, it lowered to 16.8 μmol CO₂·m^-2·s^-1 on the 38 days and dropped significantly to 7.6 μmol CO₂·m^-2·s^-1 on the 47 days. As a result of the fruit characteristics by fruiting nodes, the treatments of the fruit length was 12.6-13.4 cm, respectively, which was significant, and the fruit width was 7.9- 8.6 cm, respectively, was not significant. The soluble content ranged from 12.9 to 15.7°Brix, and the significance of all treatments, and higher than of LF-DW and HF-UW. The photosynthesis rate of melon leaves was good until 32 days after leaf development, but after that, the rate decreased. As for fruit quality, it was conformed that melons can be cultivated at the LF because the fruit enlargement and soluble content dose not decrease even when set at the LF. Results indicated that those can be used for LF and defoliation in the development of vertical and hydroponic cultivation method in high-temperature season.

• Clinical and Experimental Pediatrics
• /
• v.49 no.6
• /
• pp.610-616
• /
• 2006

Purpose : The purpose of this study was to evaluate the timing of sexual maturation and secular trends of menarchial age in Korean adolescents. Methods : Nine hundred eighty two school students and 119 university female students were included. Tanner's pubertal assessment method was applied using a self-assessment sheet with pictures for their developmental stages. A medical checkup database from 1,156,022 women was also used to analyze the age of menarche from the year 1900 to 1980. Results : Onset of puberty was at $11.3{\pm}1.3$ years(y) in girls and $12.1{\pm}1.5$ y in boys and total pubertal duration was 3.6 y in girls and 3.3 y in boys. Height at the onset of puberty was $146.1{\pm}7.9cm$ in girls and $152.7{\pm}9.8cm$ in boys. Weight at the onset of puberty was $39.3{\pm}6.9kg$ in girls and $47.7{\pm}14.4kg$ in boys. The mean age of menarche was $12.0{\pm}1.0y$ and mean age at nocturnal emission was $12.3{\pm}1.8y$. By age ten, 3.0 percent of girls experienced menarche, which increased to 41.1 percent by age 12, and 98.0 percent by age over 15. By SMR 2 breast stage, 18.2 percent of girls experienced menarche, which increased to 66.1 percent and 91.7 percent by SMR stages 3 and 4, respectively. By SMR 2 pubic hair stage, 52.0 percent and by SMR 3, 93.8 percent of girls experienced menarche. While the menarchial age of women born around 1980 was $12.4{\pm}1.1y$, the menarchial age of women born around 1990 was $12.0{\pm}1.1y$. Age at menarche has been advanced approximately by 2 years between 1900 and 1980 birth cohorts. Conclusion : There was a downward secular trend in pubertal timing. Age at menarche has been advanced by 2 years during the last 80 years. Further large scale, prospective studies, including inspection by specialists, are needed to provide reference data for pubertal timing in Korean adolescents.

• KDI Journal of Economic Policy
• /
• v.12 no.4
• /
• pp.21-46
• /
• 1990

This paper, a sequel to Yoo and Lee (1990), attempts to investigate the interindustry determinants of technical efficiency in Korea's manufacturing industries, and also to conduct an exploratory analysis on the stability of technical efficiency over time. The hypotheses set forth in this paper are most found in the existing literature on technical efficiency. They are, however, revised and shed a new light upon, whenever possible, to accommodate any Korea-specific conditions. The set of regressors used in the cross-sectional analysis are chosen and the hypotheses are posed in such a way that our result can be made comparable to those of similar studies conducted for the U.S. and Japan by Caves and Barton (1990) and Uekusa and Torii (1987), respectively. It is interesting to observe a certain degree of similarity as well as differentiation between the cross-section evidence on Korea's manufacturing industries and that on the U.S. and Japanese industries. As for the similarities, we can find positive and significant effects on technical efficiency of relative size of production and the extent of specialization in production, and negative and significant effect of the variations in capital-labor ratio within industries. The curvature influence of concentration ratio on technical efficiency is also confirmed in the Korean case. There are differences, too. We cannot find any significant effects of capital vintage, R&D and foreign competition on technical efficiency, all of which were shown to be robust determinants of technical efficiency in the U.S. case. We note, however, that the variables measuring capital vintage effect, R&D and the degree of foreign competition in Korean markets are suspected to suffer from serious measurement errors incurred in data collection and/or conversion of industrial classification system into the KSIC (Korea Standard Industrial Classification) system. Thus, we are reluctant to accept the findings on the effects of these variables as definitive conclusions on Korea's industrial organization. Another finding that interests us is that the cross-industry evidence becomes consistently strong when we use the efficiency estimates based on gross output instead of value added, which provides us with an ex post empirical criterion to choose an output measure between the two in estimating the production frontier. We also conduct exploratory analyses on the stability of the estimates of technical efficiency in Korea's manufacturing industries. Though the method of testing stability employed in this paper is never a complete one, we cannot find strong evidence that our efficiency estimates are stable over time. The outcome is both surprising and disappointing. We can also show that the instability of technical efficiency over time is partly explained by the way we constructed our measures of technical efficiency. To the extent that our efficiency estimates depend on the shape of the empirical distribution of plants in the input-output space, any movements of the production frontier over time are not reflected in the estimates, and possibilities exist of associating a higher level of technical efficiency with a downward movement of the production frontier over time, and so on. Thus, we find that efficiency measures that take into account not only the distributional changes, but also the shifts of the production frontier over time, increase the extent of stability, and are more appropriate for use in a dynamic context. The remaining portion of the instability of technical efficiency over time is not explained satisfactorily in this paper, and future research should address this question.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.46-46
• /
• 2011

Severe sediment erosion during floods occur disaster and economic losses, but general sediment erosion is basic mechanism to move sediment from upstream to downstream river. In addition, it is important process to change river form. Check dam, which is constructed in mountain stream, play a vital role such as control of sudden debris flow, but it has negative aspects to river ecosystem. Now a day, check dam of open type is an alternative plan to recover river biological diversity and ecosystem through sediment transport while maintaining the function of disaster control. The purpose of this paper is to verify sediment erosion progress of river bottom and bank as first step for river restoration after dam slit by cross-sectional shear stress and critical shear stress. Study area is upstream reach of slit check dam in mountain stream, named Wasada, in Japan. The check dam was slit with two passages in August, 2010. The transects were surveyed for four upstream cross-sections, 7.4 m, 34 m, 86 m, and 150 m distance from dam in October 2010. Sediment size was surveyed at river bottom and bank. Sediment of cobble size was found at the wetted bottom, and small size particles of sand to medium gravel composed river bank. Discharge was $2.5\;m^3/s$ and bottom slope was 0.027 m/m. Excess shear stress (${\tau}_{ex}$) was calculated for hydraulic erosion by subtracting the values of critical shear stress (${\tau}_{c}$) from the value of shear stress (${\tau}$) at river bottom and bank (${\tau}_{ex}=\tau-{\tau}_c$). Shear stress of river bottom (${\tau}_{bottom}$) was calculated using the cross-sectional shear stress, and bank shear stress (${\tau}_{bank}$) was calculated from the method of Flintham and Carling (1988). $${\tau}_{bank}={\tau}^*SF_{bank}((B+P_{bed})/(2^*P_{bank}))$$ where $SF_{bank}=1.77(P_{bed}/p_{bank}+1.5)^{-1.4}$, B is the water surface width, $P_{bed}$ and $P_{bank}$ are wetted parameter of the bed and bank. Estimated values for ${\tau}_{bottom}$ for a flow of $2.5\;m^3/s$ were lower as 25.0 (7.5 m cross-section), 25.7 (34 m), 21.3 (86 m) and 19.8 (150 m), in N/$m^2$, than critical shear stress (${\tau}_c=62.1\;N/m^2$) with cobble of 64 mm. The values were insufficient to erode cobble sediment. In contrast, even if the values of ${\tau}_{bank}$ were lower than the values for ${\tau}_{bottom}$ as 18.7 (7.5 m), 19.3 (34 m), 16.1 (86 m) and 14.7 (150 m), in N/$m^2$, excess shear stresses were calculated at the three cross-sections of 7.5 m, 34 m, and 86 m distances compare with ${\tau}_c$ is 15.5 N/$m^2$ of 16mm gravel. Bank shear stresses were sufficient for erosion of the medium gravel to sand. Therefore there is potential to erode lateral bank than downward erosion in a flow of $2.5\;m^3/s$. Undercutting of the wetted bank can causes bank scour or collapse, therefore this channel has potential to become wider at the same time. This research is about a potential of sediment erosion, and the result could not verify with real data. Therefore it need next step for verification. In addition an erosion mechanism for river restoration is not simple because discharge distribution is variable by snow-melting or rainy season, and a function for disaster control will recover by big precipitation event. Therefore it needs to consider the relationship between continuous discharge change and sediment erosion.

• Journal of Preventive Medicine and Public Health
• /
• v.21 no.2 s.24
• /
• pp.307-319
• /
• 1988

In order to determine the contents of lead, cadmium and zinc, the tissues of the crussian carp, Carassius carassius, collected from the middle streams of the Nakdong river were examined. During the dry season from 8 to 15, March, 1987, six loci were selected to sample the fish and river water; five of them were the midstreams of the Nakdong river i. e., the vicinities of the Andong dam, the Nakdong bridge, the Waegwan bridge, Gangjung and Gaepori, the other one was the Kumho river around the Paldal bridge(see Fig. 1). The microanalyses of lead and cadmium contents were undertaken by the atomic absorption spectrophotometer(Model IL-551) connected with CTF-IL 655, while that of Zinc by the flame method with IL551 only. The contents of lead and cadmium in water sampled from Gaepori distant from about 30km downward from the junction with the Kumho river were about 1.5 times higher than those from Gangjung distant about 0.5km upward from the junction, and the content of zinc from Gaepori was slightly higher than that from Gangjung. However, the contents of lead and cadmium in water sampled from Gaepori were three fifth of those from the vicinity of Paldal bridge far about 2km upperward from the junction. In the other words, the contents of lead and cadmium in the samples from the vicinity of the Paldal bridge were about 2.5 to 3 times higher than those from the Gangjung and 5 times higher than those from the Andong dam. The contents of the heavy metals in the tissues of Carassius carassius were relatively consistent to those of the aquatic environments where the fish were collected, with higher contents in the tissues of the crussian carp collected from the vicinity of Gaepori and the Paldal bridge which were so much polluted than in those from other loci in upper stream from the junction. And the contents of lead and cadmium in tissues were positively correlated with the age of the fish, however, that of zinc was not. The contents of lead in bone of crussian carp from the vicinity of the Paldal bridge in the group of 0-1 year old fish were similar to those of 4-5 years old fish from Gaepori, and higher than those of 3-4 years old fish collected from the upper stream of the junction. It is likely that fishing from Gaepori and the paldal bridge is not recommended, and all the industrial producers have to pay intensive attention to the water pollution due to the sewage disposal.

• Journal of the Korean Society of Floral Art and Design
• /
• no.44
• /
• pp.33-51
• /
• 2021

This thesis analyzes the formal characteristics of Dutch flower still life from the 17th century to the early 18th century and looks into the relevance with the Dutch art market from a macro perspective. The 17th Flower Still Life is to represent social hierarchy in that as the imported exotic, recherch items, the flowers were classified in the terms of their rarity and expensiveness. For this intriguing research, the subject is circumscribed to a vase of flowers, which is the quintessence of In the form of various Dutch Flower Still Life. Dutch society in the early 17th century was centered on the civilian class engaged in trade and commerce, which allowed them to purchase art works to show off their wealth, economic benefits and satisfaction of aesthetic tastes. Among them, the popularity of flower still life was related to the concentrated demand for rare flowers from the new continent. Accordingly, exact depiction and sense of the three dimensional manner were highly regarded in the early flower still life. For the tastes of the wealthy citizens who succeeded in business, the identity of flowers and the actual screen were considered as important. However, after the mid 17th century, economic growth in the Netherlands put an end, and the art market was also on a downward path. The demand class of flower still life has gotten farther away from the spirit of businessmen and has changed into city aristocrats who were stable rentiers. Their tastes laid emphasis on subjective sensibility, which meant that aristocratic, asymmetric, and dramatic chiaroscuro were preferred rather than being realistic. Furthermore, in the 18th century illusionistic realism was abandoned as an expression method of the planar characteristics and a new era in the floral still life was ushered with the reinforcement of decorative effect. From this perspective, it is not an exaggeration to say that romanticism, which is thought of as the beginning of Contemporary Art, originated from the aesthetic taste of Dutch civic culture.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.8 no.1
• /
• pp.92-100
• /
• 1997

Objective：The objective of this study is to examine the clinical characteristics and behavioral comorbidity of patients with Tourette’s disorder. Method：Subjects consisted of 157 patients with Tourette’ disorder diagnosed by DSM-IIIR, who were examined and diagnosed from Jan. 1988 to May 1994 at the Tourette’s Clinic of Yonsei University Medical Center. Characteristics and behavioral comorbidity of Patients were assessed by a semi-structured interview schedule. Behavioral problems like hyperactivity, obsession-compulsion, self destructiveness, enuresis, sleep problem were assessed by global clinical impression. Results：The mean age of patients was 14.49(${\pm}7.99$) years. Patients consisted of 138 males (87.9%) and 19 females(12.1%). The sex ratio was 7：1, showing a male preponderance. The number of right-handers was 133(84.7%), and the number of non-right handers was 24(15.3%). Mean age of onset was 8.85(${\pm}4.56$) years, ranging from 2-to-16 years. More than half of the patients had their age of onset at 6-10 years. Bimodal peak in age of onset was observed；the first peak was around 6 and the second peak was around 10 years. There was no sex difference in bimodal age of onset. The most common initial symptom was eye blinking. More than 55% of patients reported eye blinking as their first symptom. The second common initial symptom was head turning and the third was vocal tic. The most common symptoms that patients reported on their first visit since onset were eye blinking(82.2%), head turning or nodding(57.9%), shoulder shrugging(52.7%) and forearm movement(32.6%). Of 157 cases, 101(64.3%) patients showed downward progression of symptoms, and 25(15.9%) showed upward progression of symptoms. Nineteen fathers(12%) of patients had a past history of obsessive-compulsive disorder(OCD). Seventeen fathers(10.6%) had a history of tic disorder. SSevenmothers(4.5%) had OCD, 4 mothers (2.5%) had tic disorder. One hundred and eighteen patients(75.1%) had comorbid hyperactivity, 95 patients(60.5%) had obsession, 55 patiens(35.0%) had self destructiveness, 46 patients(29.3%) had impulsivity, and 35 patients(22.3%) had enuresis. Age of onset had a significant positive correlation with age, duration, and the global severity of obsession；and a negative correlation with the severity of hyperactivity. Hyperactivity had a significant positive correlation with impulsivity, obsession-compulsion, enuresis, and self destructiveness. Obsession-compulsion had a significant positive correlation with hyperactivity, sleep problems, and self destructiveness. Conclusion：These data suggest that clinical characteristcs and behavioral comorbidity of patients with Tourette’ disorder in this study are similar to previous research findings in Korea and other contries. The younger the age of onset was, the more severe hyperactivity was, and the less severe obsession-compulsion was. And severity of hyperactivity had a positive correlation with the severity of obsession-compulsion, impulsivity, enuresis, and self destructiveness.

• Journal of Korean Society of Forest Science
• /
• v.66 no.1
• /
• pp.16-36
• /
• 1984

It is very important in forestry to study the shear strength of weathered granitic soil, because the soil covers 66% of our country, and because the majority of land slides have been occured in the soil. In general, the causes of land slide can be classified both the external and internal factors. The external factors are known as vegetations, geography and climate, but internal factors are known as engineering properties originated from parent rocks and weathering. Soil engineering properties are controlled by the skeleton structure, texture, consistency, cohesion, permeability, water content, mineral components, porosity and density etc. of soils. And the effects of these internal factors on sliding down summarize as resistance, shear strength, against silding of soil mass. Shear strength basically depends upon effective stress, kinds of soils, density (void ratio), water content, the structure and arrangement of soil particles, among the properties. But these elements of shear strength work not all alone, but together. The purpose of this thesis is to clarify the characteristics of shear strength and the related elements, such as water content ($w_o$), void ratio($e_o$), dry density (${\gamma}_d$) and specific gravity ($G_s$), and the interrelationship among related elements in order to decide the dominant element chiefly influencing on shear strength in natural/undisturbed state of weathered granitic soil, in addition to the characteristics of soil hardness of weathered granitic soil and root distribution of Pinus rigida Mill and Pinus rigida ${\times}$ taeda planted in erosion-controlled lands. For the characteristics of shear strength of weathered granitic soil and the related elements of shear strength, three sites were selected from Kwangju district. The outlines of sampling sites in the district were: average specific gravity, 2.63 ~ 2.79; average natural water content, 24.3 ~ 28.3%; average dry density, $1.31{\sim}1.43g/cm^3$, average void ratio, 0.93 ~ 1.001 ; cohesion, $ 0.2{\sim}0.75kg/cm^2$ ; angle of internal friction, $29^{\circ}{\sim}45^{\circ}$ ; soil texture, SL. The shear strength of the soil in different sites was measured by a direct shear apparatus (type B; shear box size, $62.5{\times}20mm$; ${\sigma}$, $1.434kg/cm^2$; speed, 1/100mm/min.). For the related element analyses, water content was moderated through a series of drainage experiments with 4 levels of drainage period, specific gravity was measured by KS F 308, analysis of particle size distribution, by KS F 2302 and soil samples were dried at $110{\pm}5^{\circ}C$ for more than 12 hours in dry oven. Soil hardness represents physical properties, such as particle size distribution, porosity, bulk density and water content of soil, and test of the hardness by soil hardness tester is the simplest approach and totally indicative method to grasp the mechanical properties of soil. It is important to understand the mechanical properties of soil as well as the chemical in order to realize the fundamental phenomena in the growth and the distribution of tree roots. The writer intended to study the correlation between the soil hardness and the distribution of tree roots of Pinus rigida Mill. planted in 1966 and Pinus rigida ${\times}$ taeda in 199 to 1960 in the denuded forest lands with and after several erosion control works. The soil texture of the sites investigated was SL originated from weathered granitic soil. The former is situated at Py$\ddot{o}$ngchangri, Ky$\ddot{o}$m-my$\ddot{o}$n, Kogs$\ddot{o}$ng-gun, Ch$\ddot{o}$llanam-do (3.63 ha; slope, $17^{\circ}{\sim}41^{\circ}$ soil depth, thin or medium; humidity, dry or optimum; height, 5.66/3.73 ~ 7.63 m; D.B.H., 9.7/8.00 ~ 12.00 cm) and the Latter at changun-long Kwangju-shi (3.50 ha; slope, $12^{\circ}{\sim}23^{\circ}$; soil depth, thin; humidity, dry; height, 10.47/7.3 ~ 12.79 m; D.B.H., 16.94/14.3 ~ 19.4 cm).The sampling areas were 24quadrats ($10m{\times}10m$) in the former area and 12 in the latter expanding from summit to foot. Each sampling trees for hardness test and investigation of root distribution were selected by purposive selection and soil profiles of these trees were made at the downward distance of 50 cm from the trees, at each quadrat. Soil layers of the profile were separated by the distance of 10 cm from the surface (layer I, II, ... ...). Soil hardness was measured with Yamanaka soil hardness tester and indicated as indicated soil hardness at the different soil layers. The distribution of tree root number per unit area in different soil depth was investigated, and the relationship between the soil hardness and the number of tree roots was discussed. The results obtained from the experiments are summarized as follows. 1. Analyses of simple relationship between shear strength and elements of shear strength, water content ($w_o$), void ratio ($e_o$), dry density (${\gamma}_d$) and specific gravity ($G_s$). 1) Negative correlation coefficients were recognized between shear strength and water content. and shear strength and void ratio. 2) Positive correlation coefficients were recognized between shear strength and dry density. 3) The correlation coefficients between shear strength and specific gravity were not significant. 2. Analyses of partial and multiple correlation coefficients between shear strength and the related elements: 1) From the analyses of the partial correlation coefficients among water content ($x_1$), void ratio ($x_2$), and dry density ($x_3$), the direct effect of the water content on shear strength was the highest, and effect on shear strength was in order of void ratio and dry density. Similar trend was recognized from the results of multiple correlation coefficient analyses. 2) Multiple linear regression equations derived from two independent variables, water content ($x_1$ and dry density ($x_2$) were found to be ineffective in estimating shear strength ($\hat{Y}$). However, the simple linear regression equations with an independent variable, water content (x) were highly efficient to estimate shear strength ($\hat{Y}$) with relatively high fitness. 3. A relationship between soil hardness and the distribution of root number: 1) The soil hardness increased proportionally to the soil depth. Negative correlation coefficients were recognized between indicated soil hardness and the number of tree roots in both plantations. 2) The majority of tree roots of Pinus rigida Mill and Pinus rigida ${\times}$ taeda planted in erosion-controlled lands distributed at 20 cm deep from the surface. 3) Simple linear regression equations were derived from indicated hardness (x) and the number of tree roots (Y) to estimate root numbers in both plantations.