• 한국분무공학회지
• /
• 제12권1호
• /
• pp.18-29
• /
• 2007

Feedwater heaters of many nuclear power plants have recently experienced severe wall thinning damage, which will increase as operating time progresses. Several nuclear power plants in Korea have experienced wall thinning damage in the area around the impingement baffle - installed downstream of the high pressure turbine extraction steam line - inside number 5A and 5B feedwater heaters. At that point, the extracted steam from the high pressure turbine is two phase fluid at high temperature, high pressure, and high speed. Since it flows in reverse direction after impinging the impingement baffle, the shell wall of the number 5 high pressure feedwater heater may be affected by flow-accelerated corrosion. This paper describes the comparisons between the numerical analysis results using the FLUENT code and the down scale experimental data in an effort to determine root causes of the shell wall thinning of the high pressure feedwater heaters. The numerical analysis and experimental data were also confirmed by actual wall thickness measured by an ultrasonic test.

• 천문학회보
• /
• 제42권2호
• /
• pp.54.3-55
• /
• 2017

The Deep Lens Survey (DLS), a precursor to the Large Synoptic Survey Telescope (LSST), is a 20 deg2 survey carried out with NOAO's Blanco and Mayalltelescopes. DLS is unique in its depth reaching down to ~27th mags in BVRz bands. This enables a broad redshift baseline and is optimal for investigating cosmological evolution of the large scale structure. Galaxy-galaxylensing is a powerful tool to estimate averaged matter distribution around lensgalaxies by measuring shape distortions of background galaxies. The signal from galaxy-galaxy lensing is sensitive not only to galaxy halo properties, but also to cosmological environment at large scales. In this study, we measure galaxy-galaxy lensing and galaxy clustering, which together put strong constraints on the cosmological parameters. We obtain significant galaxy-galaxy lensing signals out to ~20 Mpc while tightly controlling systematics. The B-mode signals are consistent with zero. Our lens-source flip test indicates that minimal systematic errors are present in DLS photometric redshifts. Shear calibration is performed using high-fidelity galaxy image simulations. We demonstrate that the overall shape of the galaxy-galaxy lensing signal is well described by the halo model comprised of central and non-central halo contributions. Finally, we present our preliminary constraints on the matter density and the normalization parameters.

• 로봇학회논문지
• /
• 제18권3호
• /
• pp.241-250
• /
• 2023

This paper describes the posture stabilization control of a bipedal transformer robot being developed for military use. An inverted pendulum model with a rectangular that considers the robot's inertia is proposed, and a posture stabilization moment that can maintain the body tilt angle is derived by applying disturbance observer and state feedback control. In addition, vertical force and posture stabilization moments that can maintain the body height and balance are derived through QP optimization to obtain the necessary torques and vertical force for each foot. The roll and pitch angles of the IMU sensor attached to the robot's feet are reflected in the ankle joint to enable flexible adaptation to changes in ground inclination. Finally, the effectiveness of the proposed algorithm in posture stabilization is verified by comparing and analyzing the difference in body tilt angle due to disturbances and ground inclination changes with and without algorithm application, using Gazebo dynamic simulation and a down-scale test platform.

• 산업경영시스템학회지
• /
• 제39권4호
• /
• pp.106-116
• /
• 2016

MTO (Make to Order) is a manufacturing process in which manufacturing starts only after a customer's order is received. Manufacturing after receiving customer's orders means to start a pull-type supply chain operation because manufacturing is performed when demand is confirmed, i.e. being pulled by demand (The opposite business model is to manufacture products for stock MTS (Make to Stock), which is push-type production). There are also BTO (Build to Order) and ATO (Assemble To Order) in which assembly starts according to demand. Lean manufacturing by MTO is very efficient system. Nevertheless, the process industry, generally, which has a high fixed cost burden due to large-scale investment is suitable for mass production of small pieces or 'mass customization' defined recently. The process industry produces large quantities at one time because of the lack of manufacturing flexibility due to long time for model change or job change, and high loss during line-down (shutdown). As a result, it has a lot of inventory and costs are increased. In order to reduce the cost due to the characteristics of the process industry, which has a high fixed cost per hour, it operates a stock production system in which it is made and sold regardless of the order of the customer. Therefore, in a business environment where the external environment changes greatly, the inventory is not sold and it becomes obsolete. As a result, the company's costs increase, profits fall, and it make more difficult to survive in the competition. Based on the customer's order, we have built a new method for order system to meet the characteristics of the process industry by producing it as a high-profitable model. The design elements are designed by deriving the functions to satisfy the Y by collecting the internal and external VOC (voice of customer), and the design elements are verified through the conversion function. And the Y is satisfied through the pilot test verified and supplemented. By operating this make to order system, we have reduced bad inventories, lowered costs, and improved lead time in terms of delivery competitiveness. Make to order system in the process industry is effective for the display glass industry, for example, B and C groups which are non-flagship models, have confirmed that the line is down when there is no order, and A group which is flagship model, have confirmed stock production when there is no order.

• 한국지반환경공학회 논문집
• /
• 제22권12호
• /
• pp.65-70
• /
• 2021

우리나라 제방 중 내부침식에 의한 붕괴는 약 10% 이상을 차지하고 있다. 내부침식 뿐만 아니라 월류, 제체 불안정 등으로 인한 제방의 붕괴를 사전에 방지하고 최소한의 피해를 위하여 다양한 연구들이 시도되고 있고, 그 중 하나가 바이오폴리머 적용에 관한 연구이다. 바이오폴리머의 적용 분야에는 강도, 식생, 내침식성으로 나뉘며 본 연구에서는 내침식성에 대한 내용을 다룰 것이다. 본 연구의 목적은 모형제방의 다짐도 및 내부침식 유도로에 따른 붕괴양상을 검토하고 적합한 조건을 선정하여 바이오폴리머 혼합토 제방의 효과를 검증하기 위한 실규모 실험 기초자료를 확보하는 것이다. 모형제방의 다짐도를 상, 중, 하로 나누어 각각의 유도로 조건에 따른 침식양상을 검토하여 가장 적합한 실험 조건을 선정하였으며, 바이오폴리머 혼합토 처리 유무에 따른 효과를 확인하였다. 실험결과, 바이오폴리머 혼합토를 적용한 제방에서의 내부침식률이 크게 감소하였으며, 실제 제방에 적용이 가능할 것으로 판단된다. 그러나 본 연구에서는 스케일을 축소시킨 모형제방에 바이오폴리머 혼합토를 적용하여 실제 적용 가능한지 여부를 연구하였다. 따라서, 실제 현장적용성 평가를 위해서는 실규모 제방실험이 필요할 것으로 판단된다.

• Wind and Structures
• /
• 제20권3호
• /
• pp.449-468
• /
• 2015

Current wind-resistance designs of large-scale indirect dry cooling towers (IDCTs) exclude an important factor: the influence of the ventilation rate for radiator shutter on wind loads on the outer surfaces of the tower shell. More seemingly overlooked aspects are the effects of various ventilation rates on the wind pressure distribution on the tower surfaces of two IDCTs, and the feature of the flow field around them. In order to investigate the effects of the radiator shutter ventilation rates on the aerodynamic interference between IDCTs, this paper established the numerical wind tunnel model based on the Computational Fluid Dynamic (CFD) technology, and analyzed the influences of various radiator shutter ventilation rates on the aerodynamic loads acting upon a single and two extra-large IDCTs during building, installation, and operation stages. Through the comparison with the results of physical wind tunnel test and different design codes, the results indicated that: the influence of the ventilation rate on the flow field and shape coefficients on the outer surface of a single IDCT is weak, and the curve of mean shape coefficients is close to the reference curve provided by the current design code. In a two-tower combination, the ventilation rate significantly affects the downwind surface of the front tower and the upwind surface of the back tower, and the larger positive pressure shifts down along the upwind surface of the back tower as the ventilation rate increases. The ventilation rate significantly influences the drag force coefficient of the back tower in a two-tower combination, the drag force coefficient increases with the ventilation rate and reaches the maximum in a building status of full ventilation, and the maximum drag coefficient is 11% greater than that with complete closure.

• 한국음향학회지
• /
• 제34권2호
• /
• pp.146-156
• /
• 2015

본 연구는 흡음재와 확산체의 적용위치가 소공연장의 음향성능에 미치는 영향에 대하여 알아보았다. 서울의 대학로의 2000년 이후 개관한 36곳의 공연장의 평균크기로 소공연장의 표준모델을 설정하여 연구를 진행하였다. 본 연구에서는 마감재 적용유효면적이 가장 작은 뒷벽을 기준으로 마감재의 적용면적을 산출하고, 마감재의 적용위치별 음향성능 변화를 분석하기 위하여 천장, 측벽의 적용위치를 전반부, 중반부, 후반부로 구분하여 총 8가지의 경우를 만들어, 1/10 축소모형실험을 진행하였다. 사용된 음향지표는 잔향시간(Reverberation Time, RT), 초기감쇠시간(Early Decay Time, EDT), 음악명료도(Clarity, C80), 음성명료도(Definition, D50), 음성전달지수(Speech Transmission Index, STI)를 이용하였다. 실험결과 마감재의 적용위치 변화는 소리의 울림에 양과 관련된 음향인자인 잔향시간, 초기감쇠시간 은 최소 변화 감지폭에 의한 (Just Noticeable Difference, JND) 평가시 변화가 뚜렷하게 나타났고, 소리의 명료도와 관련된 인자인 음악명료도, 음성명료도, 음성전달지수는 변화가 거의 없는 것으로 나타났다. 짧은 잔향시간을 얻고자 하는 경우 흡음재와 확산체 적용시 모두 측벽부분을 통한 잔향시간 조절이 가장 효과적이며, 측벽 전반부가 가장 짧은 잔향시간을 얻을 수 있는 위치인 것으로 나타났다.

• 대한조선학회논문집
• /
• 제37권3호
• /
• pp.57-68
• /
• 2000

이착륙 속력을 줄이기 위해 날개 밑으로 프로펠러 후류를 불어넣어 날개와 수면사이의 압력을 증가시키는 PAR(Power Augmented Ram) 효과는 해면효과익선의 성능을 크게 향상시킨다. 본 논문에서는 풍동실험을 통해 이러한 PARWIG(Wing in Ground)선의 공력특성을 연구하였으며 송풍기(blower)와 덕트(duct)를 사용한 제트분사를 프로펠러 후류로 대신하였다. 제트의 분사속도, 분사위치(수평 및 수직 방향), 분사각 및 덕트 직경 변화에 대해 20인승 PARWIG선의 1/25 축소 모형선의 지면과의 고도, 앙각 및 플랩각의 변화에 따른 양력, 항력 및 피치모멘트를 계측하여 공력특성을 비교하였다. 적절한 PAR효과의 사용은 양력을 크게 증가시키며 최대 4의 양력계수까지 얻을 수 있었다.

• IEIE Transactions on Smart Processing and Computing
• /
• 제4권4호
• /
• pp.195-201
• /
• 2015

For median filtering (MF) detection in altered digital images, this paper presents a new feature vector that is formed from autoregressive (AR) coefficients via an AR model of the gradients between the neighboring row and column lines in an image. Subsequently, the defined 10-D feature vector is trained in a support vector machine (SVM) for MF detection among forged images. The MF classification is compared to the median filter residual (MFR) scheme that had the same 10-D feature vector. In the experiment, three kinds of test items are area under receiver operating characteristic (ROC) curve (AUC), classification ratio, and minimal average decision error. The performance is excellent for unaltered (ORI) or once-altered images, such as $3{\times}3$ average filtering (AVE3), QF=90 JPEG (JPG90), 90% down, and 110% up to scale (DN0.9 and Up1.1) images, versus $3{\times}3$ and $5{\times}5$ median filtering (MF3 and MF5, respectively) and MF3 and MF5 composite images (MF35). When the forged image was post-altered with AVE3, DN0.9, UP1.1 and JPG70 after MF3, MF5 and MF35, the performance of the proposed scheme is lower than the MFR scheme. In particular, the feature vector in this paper has a superior classification ratio compared to AVE3. However, in the measured performances with unaltered, once-altered and post-altered images versus MF3, MF5 and MF35, the resultant AUC by 'sensitivity' (TP: true positive rate) and '1-specificity' (FN: false negative rate) is achieved closer to 1. Thus, it is confirmed that the grade evaluation of the proposed scheme can be rated as 'Excellent (A)'.

• 대한토목학회논문집
• /
• 제29권1A호
• /
• pp.9-18
• /
• 2009

본 논문은 외부 긴장된 텐던의 장력추정에 대한 차분진화기법의 적용을 소개한다. 제안된 차분진화 알고리즘의 SI기법은 기존의 구배 기반의 최적화 기법과는 다르게 전역해 탐색이 가능하다. 수치실험은 인식변수에 대한 사전정보 없이도, 제안된 차분진화기법이 외부긴장 텐던의 정확한 장력 추정뿐 아니라 유효공칭직경 추정이 가능하여 1%미만의 추정 오차를 갖는 유용한 기법임을 보여준다. 또한 긴장력 손실 유무의 사용 상태를 고려한 축소실험 모델 실험을 이용하여 제안된 기법의 타당성이 실험적으로 검증되었다. 실험의 결과는 긴장력 손실과 무관하게 정확한 장력 추정과 유효공칭직경의 추정뿐 아니라 실험 모델의 감쇠비까지 추정되어 제안된 기법이 적합하고, 효과적인 방법임을 보여준다. 유효공칭 직경의 2% 추정 오차는 실제 꼬여진 단면을 갖는 텐던의 직경과 충실단면을 갖는 FE 모델의 직경의 차이 때문이다. 마지막으로, 기존이론과의 비교 분석으로 제안된 차분진화 기법의 정확성과 우월성이 검증되었다.