• 한국잠사곤충학회지
• /
• 11호
• /
• pp.31-44
• /
• 1970

접목법에 대체할 수 있는 새로운 상묘의 생산방법으로서 삽목재육묘의 육성법에 대하여 연구하였다. 1. 신소를 삽목하면 15 일후부터 발근하기 시작하여 거의 직선적으로 발근양이 증가하며 삽木 40일후에는 발근수 43본, 총근중 5.4g, 총근장 11.19mm에 달한다. 2. 신소삽목의 활착비율은 56~90%의 범위내에 있고 그 평균은 73% 정도이며 품종별로 보면 개량서반, 일지뢰가 80% 정도로 가장 좋고 시평이 가장 못하다. 3. 품종간에 있어서의 발근량은 개량서반, 일지뢰, 수원상4호, 노상은 거의 같은 정도로 많고 용천추우와 시평은 적다. 4. 발근촉진제는 NAA 0.01~0.02%에 2~3초 침지하며 그대로 삽목하는 것이 발근량도 못하지 않고 또 경제적이다. 5. 삽수의 채취량 증가와 경제적인 이용을 위해서는 1) 50cm 정도의 신소를 채취하여 2본씩의 삽수를 채취하고 중간부의 삽수의 기부는 반드시 절치하에서 절단하도록 할 것이며 2) 50cm 미만의 것도 전부 채취하여 이용한다. 가는 삽수나 생장정지아도 발근량은 약간못하나 상당히 발근하므로 이용가치가 있다. 3) 이렇게 하면 10a당 100,000본 이상의 삽수를 채취할 수 있다. 6. 삽수의 하단은 절치하에서 45$^{\circ}$로 사단한 다음 그 뒷면을 삭제하면 그 발근량을 증가시킬 수가 있다. 7. 재육묘를 육성하기 위한 삽목원묘는 10a당 100,000본을 삽목하여도 묘질은 약간 떨어지지만 실용적으로는 원묘로 이용하는데 별 지장이 없을 정도이다. 8. 삽목시기는 7월 중순까지는 그 시기가 늦어지는데 따라서 묘질은 약간 떨어지지만 충분히 이용가치가 있으므로 6월 상순부터 7월 중순까지사이에 수회에 걸쳐서 삽목할 수 있으며 6월하순이후에는 춘벌상수의 신소를 삽수로 이용한다. 9. 재육묘는 원묘의 중량이 10g 이상인 것은 그 성묘비율이 95% 이상이 되고 5~10g의 작은 원묘는 80% 이상의 성묘비율이 되며 그 묘질도 접목묘와 비슷하다. 10. 원묘를 식재할 때에는 그 묘조는 신조의 기부에 3~4아 남기고 절단하도록 한다. 11. 삽목재육묘의 생산비는 접목묘의 52%이다.

• 한국병원경영학회지
• /
• 제17권4호
• /
• pp.21-31
• /
• 2012

This is a case study of Gangnam S University Hospital applying a par level transfer system for reagent materials. The purpose of this study is evaluated on the cutting down on inventory expenses and medical service revenue in the point of resource based view. The data was acquired through the financial statement of Gangnam S Hospital for the fiscal year 2008, 2009, 2010 and 2011, and compared with the Korea health industry statistics index for hospital accounts based on the materials in Korea Health Industry Development Institute. The results of the study are as follows. Medical reagent materials expenditure cut down as 305 million won through 2009 fiscal year. Medical profits for the Gangnam S University hospital's income statement in 2011 show well over acquired 3.37 billion won through the enlarged diagnostic test numbers. In conclusion, Gangnam S University Hospital health statistics's index shows very high profits. The results of this study have some limitations in terms of generalization as only one hospital in Seoul. Further studies with relationship inventory performance and enlarged reagent materials are expected in this area.

• 기술혁신학회지
• /
• 제7권3호
• /
• pp.641-656
• /
• 2004

L Company is producing the second sept pin, Shadow Mask which is the chief part of CRT in W, Monitor. Inside of the CRT pan, Shadow Mask leads the electronic beam to express the three primary colors; red, green, blue, and it is the core part to embody the colors. In the etching process, it produces this part with manufacturing by eroding the iron chloride. Even though the iron chloride is harmless to human body. it is necessary to diminish the amount of it on the view of preservation of environment. In addition, by studying the method of the dispossed liquid process, cutting down the manufacturing cost is a necessary task on the aspect of reconsideration of competitive business. This study shows the case that through the six sigma innovation activity, it reforms the following the former processing flow, and it reduces the amount of it by improving the efficiency of the iron chloride. By rationalization of the standard requirement cooperative company, it could cut down the manufacturing cost in the cooperative company, so it could promote the common profits.

• 동력기계공학회지
• /
• 제13권6호
• /
• pp.95-101
• /
• 2009

The generator for gas turbine power generation consists of the rotor which generates magnetic field, the winding coil which is the path for the field current and the wedge and retaining ring which prevents the radial movement of the coil. Relatively severe deformation was observed at the coil end section during the inspection of the generator for peaking-load operation, and the thermal-electricity and the centrifugal force were evaluated by the simple modeling of the windings to find the cause. But the simulation stress was not sufficient to induce the coil plastic deformation. The analysis result seems to be applicable to the base-load generators which runs continuously without shut down up to a year, but there had been more deformation than simulated for the generator which is started up and shut down frequently. The cause of the coil deformation was the restriction of the expansion and shrinkage. The restriction occurs when the winding coil shrinks, and the stress overwhelms the yield stress and cause the plastic deformation. The deformation is accumulated during the start-ups and shut-downs and the thermal growth occurs. The factors which induce the coil restriction during the expansion and shrinkage should be reduced to prevent the unallowable deformation. The resolutions are cutting off the field current earlier during the generator shut-down, modifying the coil end section to remove the stress concentration and making the insulation plate inserted between the coil end section and the retaining ring have the constant thickness.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.87-96
• /
• 2010

PAP method is a combined measures which consist a anchored retaining wall method with permanent ground anchors and vertical precast concrete panels, step by step on the slope surface. And soil is back filled between slope and vertical precast panels. Therefore, this method is more effective than any other ground anchor reinforcing methods of slope stability, for example cross type concrete block ground anchor or buttress concrete block ground anchor method. Because of increasing effective anchor force and green tree planting.

• 품질경영학회지
• /
• 제24권4호
• /
• pp.112-123
• /
• 1996

ISO 9000 series, as quality management system that assesses quality system based on the documentation such as quality manual, documented procedures, specification is properly operated and then decides to give a certification, is a screening documented system that includes factors which may influence quality. Therefore, to have a proper documented system and its performance accordant to it is very important to the company which hopes to acquire the certification of ISO 9000 series. So, the objectives of this paper are to increase the efficiency of the work by cutting down efforts necessary to establish and revise documented procedures for the certification of the ISO 9000 series in the company using the documentation system.

• 한국기계가공학회지
• /
• 제9권6호
• /
• pp.43-50
• /
• 2010

This study aims to analyze the structural safety by comparing deformation and equivalent stress of door with a stiffener or no stiffener when the door crashes against something in case of overturn. Three types are classified on the basis of the no stiffener model in the vehicle door. One is the type which has a stiffener. Another is the type which has no stiffener and the other is the type which has a hole in the stiffener. These three types are compared with each other by analyzing. This side door of vehicle is the automotive part about the kind of vehicle as Mercedes Benz E-Klasse scaled down as 1/18 times as the real size. The study model of vehicle door is modelled by CATIA program and it is analyzed by ANSYS.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.121-124
• /
• 1995

This study is aimed at cutting down the cost, weight and improving process by replacing the traditional sintered piston of the shock absorber with engineering plastic piston by means of injection molding. To obtain the high mechanical properties, glass fiber material was selected adequately and forming analysis considering fiber orientation was made to remove the forming deficit fators and to construct the optimal runner system. In addition, structural analysis using commercial software MOLDFLOW was performed under near conditions in actual driving of automotive. The results from the internal pressure process test, oilproof test based on forming, structural and strength analysis shows that hydraulic close performance and damping force considering the out of roundness of shock absorber are relatively good.

• 한국멀티미디어학회논문지
• /
• 제19권6호
• /
• pp.1052-1064
• /
• 2016

For effective management and processing for civil affairs, online public services are in operation in every administrative organizations. However, due to the lack of links in each government departmental business processes on e-Government system, the satisfaction of the civil petitioners has not improved. In this paper, we propose an improved business process for the implementation of one-stop integrated civil affairs and suggestions services on e-Government system to reduce the time and cost for processing civil affairs and to improve the efficiency of the public services by cutting down the cost and time. This paper also suggests the ways to improve the quality of public service through redesigning civil affairs processing in the light of integrated system for the civil affairs and its suggestion.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1342-1346
• /
• 2004

Recently, the load increasement and regenerative system of electrified railway system make a difficult to distinguish between the load current and fault current and it need a new intelligent protection system. The failure of traction system cause collapse of the other systems from high tension current. The over current from abnormal situation produces high tension current flow, high temperature are, voltage instability and current cutting, and break down railway systems. Protective system of traction system playa role of which detect and isolate failure points. In this paper, we proposed intelligent algorithm for discriminating normal and abnormal situation instead of the system being operated abnormally.