• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.162-163
• /
• 2016

This paper presents a mathematical model for optimizing earthwork allocation plan that minimizes earthwork cost. The model takes into account operational constraints in the real-world earthwork such as material-type (i.e., quality level of material) and quantities excavated from cut-sections, required quality of material and quantities for each embankment layer, top-down cutting and bottom-up filling constraints, and allocation orders. These constraints are successfully handled by assuming the rock-earth material as the three dimensional (3D) blocks. The study is of value to project scheduler because the model identifies the optimal earth allocation plan (i.e., haul direction (cut and fill pairs), quantities of soil, type of material, and order of allocations) expeditiously and is developed as an automated system for usability. It is also relevant to estimator in that it computes more realistic earthworks costs estimation. The economic impact and validity of the mathematical model was confirmed by performing test cases.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.04a
• /
• pp.250-255
• /
• 2011

A Photovoltaic/Thermal(PVT) solar system consists of PV module and thermal absorber plate which convert the absorbed solar radiation into electricity and heat. Meaningful researches and development (R&D) on the PVT technologies have been performed since the 1970s. This paper presents a review of the previous works covering the various types of PVT and their performance analysis in terms of electrical and thermal efficiency. This review compares electrical and thermal efficiency of the different types of PVT collectors and analyzes the parameters affecting PVT performance. Based on the literature review, box charmel type PVT with unglazed, or flat plate PVT with glazed have the highest efficiency among them. From the literature review, R&D should be carried out aiming at improving their overall electrical and thermal efficiency and cutting down the cost, making them more competitive in the energy consumption market.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1390-1395
• /
• 2004

Recently, the load increasement and new regenerative systems of electrified railway system make it a difficult to distinguish between the load current and fault current. The failure of traction system perhaps causes over-current to flow. The high current can collapse other railway systems. If failures of the traction system takes place, the failures are detected and protected lest it should provoke high current flow. The over current from such a traction system failure permit to charge high tension voltage and produces high temperature arc, voltage instability, current cutting, and break down railway systems. The traction system failures detect and the system has to immediately cut off from over-current flow. To isolate the failure, the system can distinguish failure current from current flows. It forces us to adapt such as a new intelligent protection system. The protective system in traction system play a role of detecting and isolating failure points. In this paper, we proposed intelligent algorithm for discriminating normal and abnormal situation instead of the system being operated abnormally.

• Journal of Agricultural Extension & Community Development
• /
• v.3 no.1
• /
• pp.43-54
• /
• 1996

Citrus farming become one of highly potent area for the farmer s income in the Asia region. Because of its favorable taste and distinctive aroma, attractive color, and nutritional values, market demand has increased steadily along with the income increases in the region. However, realization of the potent have been constrained due to poor orchard management, frequent occurrences of pest and diseases, and a high cost in production besides of the market failures. Cutting down of production cost should be an operational goal to obtain mope profit where marketing structure has yet been underdeveloped. The objective of this study was to provide a comparative information to those program efforts of searching comparative advantage in production. For the three countries, reduction of labor cost by reduction of chemical application frequency was recommended while pursuing further mechanization in those operation such as in pruning, harvesting and pest control. Adoption of the IPM (integrated pest management) will be useful to reduce the number of spraying chemicals with changed knowledge and attitude of the farmers.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.18 no.36
• /
• pp.121-131
• /
• 1995

The purpose of a business's existence is to make profit. The objective of business can be attained through the most profitable activities such as the improvement of productivity, quality and the reduction of the manufacturing cost. In order to produce the goods with above said goal, it can be achieved by inducing and improving the manufacturing process. In this viewpoint, We'd like to develope an algorithm for improving productivity, quality and cutting the manufacturing cost under the limitation of the resources. This paper showed a practical method which gradually improves three factors [productivity, quality and cost-down] by calculating the effective value of single and multi process mutually.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.11
• /
• pp.1987-1992
• /
• 2008

In recent years, the shape of ship building have been advanced. Thus the system is complex and cable is much used in ship. In this paper, Dijkstra algorithm is used to solve the shortest path of cable laying. Cable laying is given much weight in fable management system of ship. The developed cable management system is cut down on expenses and is improve the operation efficiency for ship building. Therefore, the developed cable management system can be used a support system in order to achieve a management target of company.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.190-195
• /
• 2008

Surge proof equipment is an installation to make surge flow on the ground promptly so as to reduce surge-related damage on infrastructure, not to prevent surge from falling down on infrastructure directly. Compared with classical line individual earth, High speed line common earth has higher surge characteristic and plays a significant role to prevent infrastructure damage and injuries from surge, or short circuit accident between 25kV catenary and rail. In this paper, we analyzed the case of accident that caused communication/signaling system impaired while a tractor crossing level crossing at Honam line; in addition, we examined the accident reduction measures to minimize injury and property damage from cutting accidents with respect to common earth network.

• International Journal of Highway Engineering
• /
• v.13 no.1
• /
• pp.21-32
• /
• 2011

The frost penetration depth of pavement is usually estimated from the freezing index that made temperature data analysis of 30 years and decided the thickness of anti-frost layer. The field monitoring region in study was divided into five regions by freezing index 550~650$^{\circ}C{\cdot}$day, 450~550$^{\circ}C{\cdot}$day and 350~450$^{\circ}C{\cdot}$day. Each region has three-section of road pavement such as cutting area, boundary area of cutting and banking, and lower area of banking. The field monitoring system was established both in the section of anti-frost layer and in the section without anti-frost layer. The data analysis was conducted for determination of frost penetration depth within the paved road by the field monitoring system. The result showed that The temperature of subgrade without anti-frost layer shows below zero in centigrade for the region of freezing index 550~650$^{\circ}C{\cdot}$day, up and down around zero degree in subgrade for the region of freezing index 450~550$^{\circ}C{\cdot}$day, and there is no place existed below zero degree in subgrade for the region of freezing index below 450$^{\circ}C{\cdot}$day. With comparison of field frost penetration depth for the cross-sections of pavement, the cutting area shows the greatest frost penetration depth, and less influence of frost penetration depth for the boundary area of cutting and banking, and the least influenced for the lower area of banking.

• Journal of Forest and Environmental Science
• /
• v.18 no.1
• /
• pp.1-6
• /
• 2001

This research was carried out to establish the large quantity propagation system for Kalopanax pictus using root cutting. The results are as follows. As there was no significant difference in the promotion of adventitious shoot development from the root cuttings of Kalopanax pictus among kinds (IBA, NAA and Kinetin) and concentrations (0 to 2000 mg/L) of growth regulators, no application is recommended, which showed more than 90% of shoot development. Horizontal and vertical placement of rooting showed more than 93% of shoot occurrence, but the latter showed more desirable growth traits in the number of shoot development, number of leaf, petiole length, and leaf length and leaf width Polarity was observed and thus normal vertical placement of root cutting is preferred. However, root cuttings placed upside down showed the shoot development at the distal end, which indicates further sophisticated test is necessary to investigate this phenomenon.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.2
• /
• pp.121-135
• /
• 2016

The present study is an analysis of the monitoring results of the four areas that underwent the experimental construction of Straw-net+seedspray, Vegetation media spray method(t=2cm), and Vegetation media spray method(t=3cm), with the purpose of selecting the adequate revegetation of cutting slopes in weathered granite soil. Cutting slopes are mostly designed in the Straw-net+seedspray method, but since weathered granite soil slopes tend to have an infertile soil quality that runs down, it is difficult for seed germination and growth. It is difficult to apply Straw-net+seedspray to weathered granite soil slopes considering the germination rate and coverage rate of the Straw-net+seedspray method, which accompanies erosion and scouring. The final conclusions are summarized as follows. First, Straw-net+seedspray has difficulty recruiting plants to infertile weathered granite soil, which results in a lower coverage rate and fewer species, so it is not adequate construction method. Second, Vegetation spraying methods with wet media are more advantageous in early revegetation. The wet construction methods are faster than the dry construction methods in terms of early germination and its early growth are more excellent. Third, when constructing Vegetation spray methods with dry media, it were more advantageous if the thickness was thicker. When the soil-media is thicker, the soil is resilient to droughts, so the thickness must be flexibly applied according to the soil quality and slant of the weathered granite soil slope. The present study is a monitoring result for some areas of Gangwon-do, so its results may differ from other areas.