• Title/Summary/Keyword: Doubling

Search Result 429, Processing Time 0.023 seconds

Analysis of ultra-short optical pulse generation by LD gain-switching (LD gain-switching에 의한 초단 광 펄스 발생 해석)

  • 김윤중;김동각;김창민
    • Journal of the Korean Institute of Telematics and Electronics D
    • /
    • v.34D no.10
    • /
    • pp.85-92
    • /
    • 1997
  • For a InGaAsP buried - heterostructrue $1.3\mu\textrm{m}$ LD with fabry-perot cavity structure, the procedures of ultra-short optical pulse genration ar eanalyzed by simulating the rate equations. Investigting the effects of injected current pulse parameters such as bias $J_b$, pulse width $T_d$ and pulse amplitude $J_p$ on the generated optical pulses, we derive the optimum conditions to obtain a single optical pulse with strong peak value. We also observe that the repetition rate of current pulses needs to be restricted under a certain threshold to generate a train of single optical pulses, and that the period doubling phenomenon takes place by increasing the repitition rate.

  • PDF

Development of nonlinear crystals and blue SHG laser

  • Furukawa, Yasunori;Makio, Satoshi;Miyai, Tsuyoshi;Sato, Masayoshi
    • Proceedings of the Korea Association of Crystal Growth Conference
    • /
    • 1996.06a
    • /
    • pp.293-324
    • /
    • 1996
  • Compact solid-state blue laser have great potential for use in optical data storage, laser beam printing, particle countering, reprographics, holography, and fluorescent bioanalysis. We report recent progresses in qualities of LiB3O5 and K3Li2(TaxNb1-x)5O15 nonlinear crystals which are essential in manufacturing bulk-type blue SHG devices. We also review newly developed violet-blue laser, 20 mW output, using intracavity frequency doubling of a diode laser pumped Cr:LiSrAlF6 laser with low loss LiB3O5 crystal as a frequency doubler.

  • PDF

Bifurcation Characteristics of DC/DC Converter with Parameter Variation (DC/DC 컨버터의 파라미터 변동에 따른 분기 특성)

  • 오금곤;조금배;김재민;조진섭;정삼용
    • Proceedings of the KIPE Conference
    • /
    • 1999.07a
    • /
    • pp.650-654
    • /
    • 1999
  • In this paper, author describe the simulation results concerning the period doubling bifurcation route to chaos of DC/DC boost converter under current mode control to show that it is common phenomena on switching regulator when parameters are improperly chosen or continuously varied beyond the ensured region by system designer. Bifurcation diagrams of periodic orbits of inductor current and capacitor voltage of DC/DC boost converter are plotted with sampled data at moment of each clock pulse causing switching on. DC/DC boost converter studied on this paper is modelled by its state space equations as per switching condition under continuous conduction mode. Current reference signal and capacitance are chosen as the bifurcation parameters and those are varied in step for iterative calculation to find bifurcation points of periodic orbits of state variables.

  • PDF

Effects of Paddle Wheel on Water Circulation in Shrimp Culture Ponds (축제식 대하양식장에서 수차의 순환기능)

  • 강윤호
    • Journal of Aquaculture
    • /
    • v.14 no.1
    • /
    • pp.43-50
    • /
    • 2001
  • To study the effect of paddle wheel on water circulation, velocity components were measured in shrimp ponds both along the longitudinal direction from a single paddle wheel and at 25 grid points of two ponds, which have mean water depth of 1.2m and aspect ratio (length/width) 1.05 and 0.68, respectively. An analysis of factors related to water quality and circulation showed that I) a single paddle wheel has an effective distance of 33m for de-stratification, 16m for particulate suspension and 25m for removal of organic material, dispersion of DO and prevention of bed sediment disturbance and ii) with doubling the number of paddle wheels at the pond corners, the flow speed increased by 13% over the ponds, while it reduced by 8.5% around the pond centres. Contrary to expectation, increasing the number of paddle wheel did not generate strong circulation around the pond centre and improve water quality.

  • PDF

Efficient Generation of Scalable Transport Stream for High Quality Service in T-DMB

  • Kim, Kwang-Yong;Lee, Gwang-Soon;Lim, Jong-Soo;Lee, Soo-In;Kim, Duk-Gyoo
    • ETRI Journal
    • /
    • v.31 no.1
    • /
    • pp.65-67
    • /
    • 2009
  • We introduce an advanced terrestrial digital multimedia broadcasting (AT-DMB) system that overcomes the limitation of data transmission rates of T-DMB by doubling it with the same frequency bandwidth. In this letter, we propose an efficient algorithm which generates a scalable transport stream in AT-DMB by multiplexing certain types of elementary streams encoded using scalable video coding and an MPEG-surround audio coder for high-quality multimedia services.

  • PDF

Application of Fluorescence/Scattering Technique to the Measurement of Spray Droplet Size in GDI Injector (직접 분사식 가솔린 인젝터 분무의 입경 측정에 형광/산란광법의 적용)

  • Kwak, Soo-Min;Ryu, Kyeong-Hun;Choi, Bong-Seok;Kim, Duck-Jool
    • Proceedings of the KSME Conference
    • /
    • 2000.11b
    • /
    • pp.353-358
    • /
    • 2000
  • To achieve the requirement for high fuel economy and low emissions, the research for GDI engines is recently very brisk in the whole world. This study was performed to measure distribution of average particle size in non-evaporating spray. The 2-D fluorescence/scattering images of fuel spray were captured simultaneously by visualization system composed of a laser sheet, a doubling prism, optical filters, and an ICCD camera. Using the ratio of the two light intensities, particle size distribution was obtained. The SMD measured by fluorescence/scattering technique was compared with it obtained by PDA. The experimental results show that the spray structure of GDI injector and temporal SMD distribution.

  • PDF

A Study on the Thermal Specific of Operational Spindle System of Machine Tool by FEM (주축의 동적거동시 FEM을 이용한 열적 특성에 관한연구.)

  • 임영철;김종관
    • Proceedings of the Korean Society of Machine Tool Engineers Conference
    • /
    • 2003.10a
    • /
    • pp.396-400
    • /
    • 2003
  • This paper has studied thermal characteristics of machine tool to develope high speed spindle and optimum design condidering the thermal deformation. Comparing the test data of temperature measurement and structural analysis data using FEM, we verifiedthe test validity and predicted thermal deformation, influence of spindle generation of heat, and established cooling system to prevent the thermal deformation. 1) The temperature rise of spindle system depends on increasing number of rotation and shows sudden doubling increment of number of rotation over 7,000rpm. 2) Oil jacket cooling can be effective cooling method below 8,000rpm but, over 8,000rpm, it shows the decrement of cooling effect. 3) Comparing FEM analysis results and revolution test results, we can confirmn approximate temperature change consequently, it is possible to simulate temperature rise and thermal distribution on the inside of spindle system. 4) We can confirm that simulated approach by FEM analysis can be effective method in thermal-appropriate design..

  • PDF

Update of Research on Drug Resistance in Small Cell Lung Cancer Chemotherapy

  • Chen, Yi-Tian;Feng, Bing;Chen, Long-Bang
    • Asian Pacific Journal of Cancer Prevention
    • /
    • v.13 no.8
    • /
    • pp.3577-3581
    • /
    • 2012
  • Small cell lung cancer (SCLC) is characterized by a short cell doubling time, rapid progression and early occurrence of blood-borne and lymph metastasis. The malignancy is the highest of all lung cancer types. Although SCLC has a relatively good initial response to chemotherapy as well as radiotherapy, relapse or disease progression may occur quickly after the initial treatment. Drug resistance, especially multi-drug resistance, is the most important cause of failure of SCLC chemotherapy. This article provides a brief update of research on mechanisms of drug resistance in SCLC and reversal strategies.

Effect of KCl and NaCl on Uptake of Proline in Staphylococcus aureus

  • 배진현
    • Journal of the East Asian Society of Dietary Life
    • /
    • v.5 no.1
    • /
    • pp.101-107
    • /
    • 1995
  • Staphylococcus aureus, the most salt-tolerant food-borne pathogen, produces enterotoxins which may cause symptoms such as vomiting, diarrhea, nausea, and cramps. Since this bacterium has been able to grow at extremely high osmolarity its identity in foods with low water activity values such as salted or dried foods is of great concern. In this study, the growth of S. aureus at high osmolarity has been studied and the doubling time of S. aureus grown at TSB medium containing 15% NaCl has been found to be increased to 4∼5 hours. The stimulation of proline uptake after exposure of cells to high concentration of both extracellular KCl and sucrose was not increased. Stimulation of proline uptake at these environment only occured when 25mM NaCl was present I transport buffer. In additional experiments, the time required to reach mid-logarithmic phase in defined medium of high osmolarity found to be reduce by the presence of glycine betaine, proline, and choline.

  • PDF

Depth-of-interest-based Bypass Coding-unit Algorithm for Inter-prediction in High-efficiency Video Coding

  • Rhee, Chae Eun
    • IEIE Transactions on Smart Processing and Computing
    • /
    • v.5 no.4
    • /
    • pp.231-234
    • /
    • 2016
  • The next-generation video coding standard known as High-Efficiency Video Coding (HEVC) was developed with the aim of doubling the bitrate reduction offered by H.264/Advanced Video Coding (AVC) at the expense of an increase in computational complexity. Mode decision with motion estimation is still one of the most time-consuming computations in HEVC, as it is with H.264/AVC. Several schemes for a fast mode decision have been presented in reference software and in other studies. However, a possible speed-up in conventional schemes is sometimes insignificant for videos that have inhomogeneous spatial and temporal characteristics. This paper proposes a bypass algorithm to skip large-block-size predictions for videos where small block sizes are preferred over large ones. The proposed algorithm does not overlap with those in previous works, and thus, is easily used with other fast algorithms. Consequently, an independent speed-up is possible.