• 한국의류학회지
• /
• 제44권3호
• /
• pp.427-440
• /
• 2020

This study developed a vest prototype capable of monitoring body temperature using textile electrodes to prevent the sudden death of babies as well as to determine the quality of developed products by evaluating usability with commercial products. Based on the results of the 7th Size Korea Project, a basic pattern for a vest prototype was drafted by applying the average size of two-year-old Korean babies. Two prototypes were the detachable (VEST I) and integrated textile electrodes vest type (VEST II), which followed the same design. The materials were 100% cotton single jersey (SJ) and double jersey (DJ). Six experts evaluated the usability of the developed vests (VEST I & VEST II) and commercial product (VEST M). The single-layer woven textile electrode appeared to have a slightly higher conductivity than the double-layer one. There was no statistical difference in the body temperature sensing function between VEST I and VEST II. Finally, the superiority of the VEST I was verified through a comparison with commercial products (VEST M). The usability test suggested that a wearable smart clothing system of the integrated conductive textile could be further commercialized for bio-monitor applications in Ubiquitous-health care.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.297-306
• /
• 2014

The paper presents the numerical analysis of wave run-up over rubble-mound breakwaters covered by antifer units using a technique integrating Computer-Aided Design (CAD) and Computational Fluid Dynamics (CFD) software. Direct application of Navier-Stokes equations within armour blocks, is used to provide a more reliable approach to simulate wave run-up over breakwaters. A well-tested Reynolds-averaged Navier-Stokes (RANS) Volume of Fluid (VOF) code (Flow-3D) was adopted for CFD computations. The computed results were compared with experimental data to check the validity of the model. Numerical results showed that the direct three dimensional (3D) simulation method can deliver accurate results for wave run-up over rubble mound breakwaters. The results showed that the placement pattern of antifer units had a great impact on values of wave run-up so that by changing the placement pattern from regular to double pyramid can reduce the wave run-up by approximately 30%. Analysis was done to investigate the influences of surface roughness, energy dissipation in the pores of the armour layer and reduced wave run-up due to inflow into the armour and stone layer.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.831-835
• /
• 2007

Energy Saving is one of worldwide emerging issues. These days, applicable techniques of railway vehicle's regenerative energy are investigating in worldwide railway industries. Energy saving methods are "Downsizing energy loss" and "Re-utilizing kinetic energy". Useful plans for Downsizing energy loss are "adjusting operation table" and "optimizing running pattern". Furthermore, regenerative energy that is produced with decreasing speed and stoping, is an important element with reducing vehicle's weight, raising equipment 's efficiency, decreasing running resistance and re-configurating running pattern. Sustainable energy storage mass : Flywheel, EDLC(electrical double layer capacitor) and Secondary battery are applied in overseas, but these cases are not reported within the country. This research is reported for problems and economical validity that comes from by installing sustainable regenerative energy storage system in korean railway industries.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.946-949
• /
• 2005

In this paper, influence factors on dynamic properties of floor impact noise insulation materials are suggested. For this purpose measurements on the dynamic stiffness and the loss factor of resilient materials are carried out by Korea standard (KS F 2868) according to the change of density, thickness, design pattern, and composition of materials. As a result the values of dynamic stiffness was decreased at high density and thick thickness, and that of loss factor was increased at low density. For dynamic properties, the pattern of lattice and waffle type material is better than that of plat type, and the mixed composition of materials is better than the composition of double layer materials at same thickness.

• 한국어류학회지
• /
• 제29권3호
• /
• pp.218-223
• /
• 2017

한국산 담수어류 버들붕어의 눈을 관찰하고 시각을 담당하는 망막의 시각세포 구조를 광학현미경과 주사전자현미경을 이용하여 조사하였다. 버들붕어는 구형의 수정체를 보유하고 있었으며, 각막은 노란색으로 확인하였다. 눈은 $3.5{\pm}0.2mm$의 크기였으며 두장/안경비는 $31.1{\pm}5.0$으로 비교적 큰 눈을 가지고 있었다. 버들붕어의 망막은 $158.2{\pm}10.6{\mu}m$의 두께였으며 시각세포층에는 간상세포 ($57.3{\pm}1.3$), 동형 이중원추세포($33.9{\pm}3.7$) 및 단일원추세포($27.8{\pm}1.6$)로 구성되어 있었으며 횡단면을 확인한 결과 정방형의 모자이크 모델을 보유하고 있었다. 모든 시각세포는 내절과 외절의 구분이 뚜렷하였으며 간상세포가 원추세포보다 더 길어 원추세포들의 외절과 외절사이에 간상세포의 내절이 존재하였다. 간상세포의 외절은 망막 색소상피층 아래까지 신장되어 있었다. 전자현미경을 통해 미세구조를 확인한 결과 원추세포와 간상세포 모두 내절과 외절을 연결하는 배상극이 관찰되었으며 간상세포 및 동형 이중원추세포의 형태가 뚜렷하게 구분되었다. 시각세포의 횡단면을 관찰한 결과 짧은 단일원추세포를 기준으로 상하좌우에 동형 이중원추세포가 정방형 배열을 하고 있었다.

• Restorative Dentistry and Endodontics
• /
• 제43권2호
• /
• pp.22.1-22.9
• /
• 2018

Objectives: To evaluate and compare light-transmittance in dental tissues and dental composite restorations using the incremental double-layer technique with varying layer thickness. Materials and Methods: B1-colored natural teeth slabs were compared to dental restoration build-ups with A2D and B1E-colored nanofilled, supra-nanofilled, microfilled, and microhybrid composites. The enamel layer varied from 0.3, 0.5, or 1.2 mm thick, and the dentin layer was varied to provide a standardized 3.7 mm overall sample thickness (n = 10). All increments were light-cured to $16J/cm^2$ with a multi-wave LED (Valo, Ultradent). Using a spectrophotometer, the samples were irradiated by an RGB laser beam. A voltmeter recorded the light output signal to calculate the light-transmittance through the specimens. The data were analyzed using 1-way analysis of variance followed by the post hoc Tukey's test (p = 0.05). Results: Mean light-transmittance observed at thicker final layers of enamel were significantly lower than those observed at thinner final layers. Within 1.2 mm final enamel resin layer (FERL) thickness, all composites were similar to the dental tissues, with exception of the nanofilled composite. However, within 0.5 mm FERL thickness, only the suprananofilled composite showed no difference from the dental tissues. Within 0.3 mm FERL thickness, none of the composites were similar to the dental tissues. Conclusions: The supra-nanofilled composite had the most similar light-transmittance pattern when compared to the natural teeth. However, for other composites, thicker FERL have a greater chance to match the light-transmittance of natural dental tissues.

• 대한조선학회논문집
• /
• 제36권3호
• /
• pp.15-21
• /
• 1999

KRISO 300K VLCC 이중모형선 주위의 유동특성을 풍동실험을 통해 연구하였다. 선체 선미 주위유동과 후류유동의 평균속도 성분, 난류강도, 레이놀즈 전단응력 및 난류 운동에너지 분포를 열선풍속계를 이용하여 측정하였다. 실험은 선미와 후류의 횡단면에서 수행하였으며, 선체 표면에서의 유동 패턴을 정성적으로 조사하기 위하여 유막법을 이용한 유동가시화도 수행하였다. 선미와 근접 후류영역은 매우 복잡한 3차원의 유동특성을 가지고 있으며, 특히 종방향 와류영역에서 고리 모양의 후류 구조를 볼 수 있었다. 그리고 중앙평행부에서의 얇은 경계층은 선미 영역을 지나며 점차 두꺼워지고 복잡한 3차원 난류후류로 발전하였다.

• Journal of the Optical Society of Korea
• /
• 제18권1호
• /
• pp.71-77
• /
• 2014

We present design and fabrication of a multi-focusing microlens array (MLA) using a thermal reflow method. To obtain multi-focusing properties with different numerical apertures at the elemental lens of the MLA, double-cylinder photoresist (PR) structures with different diameters were made within the guiding pattern with both photolithographic and partial developing processes. Due to the base PR layer supporting the thermal reflow process and the guiding structure, the thermally reflowed PR structure had different radii of curvatures with lens shapes that could be precisely modeled by the initial volume of the double-cylinder PR structures. Using the PR template, the hexagonally packed multi-focusing MLA was made via the replica molding method, which showed four different focal lengths of 0.9 mm, 1.1 mm, 1.6 mm, and 2.5 mm, and four different numerical apertures of 0.1799, 0.2783, 0.3973, and 0.4775.

• 천문학회지
• /
• 제48권2호
• /
• pp.125-137
• /
• 2015

We report results of the performance evaluation of a new hardware correlator in Korea, the Daejeon correlator, developed by the Korea Astronomy and Space Science Institute (KASI) and the National Astronomical Observatory of Japan (NAOJ). We conduct Very Long Baseline Interferometry (VLBI) observations at 22 GHz with the Korean VLBI Network (KVN) in Korea and the VLBI Exploration of Radio Astrometry (VERA) in Japan, and correlated the aquired data with the Daejeon correlator. For evaluating the performance of the new hardware correlator, we compare the correlation outputs from the Daejeon correlator for KVN observations with those from a software correlator, the Distributed FX (DiFX). We investigate the correlated flux densities and brightness distributions of extragalactic compact radio sources. The comparison of the two correlator outputs shows that they are consistent with each other within < 8%, which is comparable with the amplitude calibration uncertainties of KVN observations at 22 GHz. We also find that the 8% difference in flux density is caused mainly by (a) the difference in the way of fringe phase tracking between the DiFX software correlator and the Daejeon hardware correlator, and (b) an unusual pattern (a double-layer pattern) of the amplitude correlation output from the Daejeon correlator. The visibility amplitude loss by the double-layer pattern is as small as 3%. We conclude that the new hardware correlator produces reasonable correlation outputs for continuum observations, which are consistent with the outputs from the DiFX software correlator.

• 한국의상디자인학회지
• /
• 제11권2호
• /
• pp.33-42
• /
• 2009

The purpose of this study was to research the development of jacquard fabrics by the Bi-Dan patterns of Dan-Chung as one of the traditional korean symbols. For performing this design study, it designed a surface design of the geometric images in Bi-Dan patterns using by EAT Jacquard Textile CAD system and simulated to fabrics for the clothing & bags. To consider the modern image of Bi-Dan patterns in the Dan-Chung motives, the theoretical background was made on the basic elements, compositions and symbolic meanings of Dan-Chung patterns. To merchandise the fashion items and see the visual image, these jacquard fabric simulations was processed by two-dimension modeling through YoungWoo CNI CAD. The applied weave structure was based on a single layer of 5 or 10 points-satin and a double layer of 8 points-satin. Among the fabric simulations of Bi-Dan patterns, the six simulated fabrics were woven into the real jacquard fabrics under the electronic Stabuli jacquard loom in $120{\sim}130$ picks per inch and 171 ends per inch. These developed jacquard fabrics of Bi-Dan patterns were appeared a contemporary yet ethnic feeling so that they could make use of the unique korean cultural products by the further commercialization.