• 한국군사과학기술학회지
• /
• 제19권2호
• /
• pp.202-210
• /
• 2016

The development of new concepts of liner is of great importance to effectively neutralize the enemy's attack power concealed in the protective structure or armored vehicles. A double layer liner has a combination of two different materials, one for penetration of target and the other for explosion after penetration. Therefore, it is of great importance to understand the temperature distribution before impact which should be lower than the explosive temperature of pure explosive material of the liner used. In this study, two different liner materials were obtained using cold spray coating and these material properties were characterized by DSC experiments. Numerical computations were done and the effect of temperature distribution and changes over time at each point of the explosive material depending on the layer types of the liner were discussed and analysed in the jet state.

• 한국군사과학기술학회지
• /
• 제19권5호
• /
• pp.618-628
• /
• 2016

The development of new concepts of liners is required in order to effectively neutralize the enemy's attack power concealed in the armored vehicles. A multiple-layer liner is one of possibilities and has a mechanism for explosion after penetrating the target which is known as "Behind Armor Effect." The multiple-layer explosive liner should have sufficient kinetic energy to penetrate the protective structure and explosive material react after target penetration. With this in mind, double-layer liner materials were obtained by cold spray coating methods and these material properties were experimentally characterized and used in this simulation for double-layer liners. In this study, numerical simulations in the three different layer types, i.e., single, A/B, A/B/A in terms of the layer location were verified in terms of finite element mesh sizes and numerical results for the jet tip velocity, kinetic energy, and the corresponding jet deformation characteristics were analysed in detail depending on the structure of layer types.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.295-304
• /
• 2010

Performance of a landfill liner is evaluated based on leakage rate and mass flux. In this study, the recently utilized double composite liner system, which consists of a geomembrane (GM), a geosynthetic clay liner (GCL), a GM, and a compacted clay layer (61 or 91.5 cm) is compared with other popular composite liners including the single GCL system, the Subtitle D liner system, and the Wisconsin NR500 liner system. The leakage rate through circular and long defects in the GM of the landfill liners is analyzed using numerical models. For the mass flux criterion, the analyses of inorganic contaminant transport through defects in the GM component of liner systems and diffusion of organic compounds through intact landfill liners are conducted using three- and one-dimensional numerical models, respectively. Cadmium and toluene are used in the analyses as a typical inorganic and organic substance, respectively, which will be chemical species encountered during landfill operation. The comparison shows that the double composite liner systems are superior to the other liner systems according to the performance-based evaluation.

• 대한기계학회논문집
• /
• 제19권7호
• /
• pp.1731-1740
• /
• 1995

Experimental investigations have been made to study the double-diffusive nature of convection of an initially stratified salt-water solution due to heating from below in a rotating cylindrical cavity. The objective is to examine the flow phenomena and the heat transfer characteristics according to the changes in temperature gradient, concentration gradient and rotating velocity of cavity. Thermal and solutal boundary conditions at side wall are adiabatic and impermeable, respectively. The top and bottom plate are maintained each at constant temperature and concentration. The cavity is put into a state of solid body rotation. Like the stationary case, the types of initially-formed flow pattern are classified into three regimes depending on the effective Rayleigh number and Taylor number; stagnant flow regime, single mixed-layer flow regime and successively formed multi-mixed layer flow regime. At the same effective Rayleigh number, the number of initially-formed mixed layer and its growth rate decrease as the effect of rotation increases. The temperature and concentration profiles are both uniform in each layer due to convective mixing in the layered-flow regime, but look both liner in stagnant flow regime and single mixed-layer flow regime. At the interface between adjacent layers, the temperature changes smoothly but the concentration changes rapidly.

• 한국농공학회지
• /
• 제39권2호
• /
• pp.26-31
• /
• 1997

Abstract A series of permeability tests was performed on the mixtures with specific mixing rates of sand and bentonite using modified rigid-wall permeameter. Sand-bentonite mixtures were permeated by organics, ethanol and TCE. Permeability of bentonite with several mixing rates had a tendency to decrease up to initial one pore volume and permeability was thereafter converged to a constant value. When sand-bentonite mixtures was permeated by water, permeability was decreased at the beginning but it was thereafter converged to a constant. Among several mixing rates, permeability was greatly decreased at 15% of mixing rate. When sand-bentonite mixtures with 15% mixing rate was permeated by ethanol, permeability was about 10 times larger value than permeability of water. Peameability was shown greater values when permeated by TCE (TrichloroEthylene) followed by ethanol. Suitable mixing rate of sand-bentonite for a liner of waste landfills was detected.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제13권1호
• /
• pp.13-23
• /
• 2008

오염물질로 오염된 퇴적점토의 강도, 변형 및 투수특성 변화를 파악하기 위하여 NaCl 수용액과 매립장 침출수를 시료의 간극수(포화수)로 교체하여 삼축압축시험과 압밀시험을 수행하였다. 또한, 채취된 점토시료의 화학적 특성을 규명하기 위하여 주사전자현미경(SEM) 관찰과 에너지분산분광(EDX) 분석이 수반된다. 화학성분 분석결과 O, C, Si, Al, Fe 크기 순의 구성비가 얻어졌으며, 삼축압축시험 및 압밀시험결과는 NaCl의 농도가 증가할수록 극한응력(강도)은 증가하고 압축성과 투수성이 커지는 경향을 보이는데, 이는 전해질의 농도가 증가할수록 확산이중층(DDL)의 두께가 감소되어 면모화되기 때문인 것으로 판단된다. 또한, 점토 차수재를 투과한 침출수가 지하수 오염에 미치는 영향을 분석하기 위하여 MT3D 해석모델이 이용되었으며, 지하수 오염거동 해석결과 초기 염소이온 농도가 클수록 측정농도도 커지며, 시간경과에 따라 지하수 오염농도는 비선형적으로 증가되었다. 지하수 오염농도 감쇄 관계식을 유도하여 지하수 오염 이동거리를 예측한 결과, 초기농도가 클수록 지하수 오염 이동거리도 크게 나타났다.

• 한국지반공학회논문집
• /
• 제27권12호
• /
• pp.5-15
• /
• 2011

본 연구는 매립지의 최종복토층으로 사용되는 점토 혹은 지오멤브레인의 부등침하 및 기상조건변화에 의한 균열에 취약한 점을 고려하여 균열 발생시 자가형성된 물질로 인하여 균열치유 작용을 할 수 있는 SRSL(Self Recovering Sustainable Liner)의 매립지 최종복토층으로서의 적용성을 파악하였다. SRSL 기법은 2개의 층을 두어 상, 하부층 사이 계면에 불투수성 물질을 생성하는 동시에, 균열발생 시에도 2가지 성분이 다시 결합하여 불투수성 물질을 재형성하는 역할을 수행한다. SRSL의 최종복토층의로서의 적용성 파악을 위해서 실험실에서 연성벽체 투수시험기를 사용하여 투수 특성을 파악하였고 일축압축시험을 통하여 강도 및 강성 특성을 파악하였다. 또한 최종 복토층의 경우 환경적인 요인에 직접적으로 노출되어 있기 때문에 동결/융해 및 건조/습윤에 따른 SRSL의 투수 및 강도 특성 또한 알아보았다. 시험 결과, SRSL은 낮은 투수계수와 기준보다 높은 강도를 가진 매립장의 복토층 재료로 적합한 물질로 판단되며, 동결/융해 및 건조/습윤의 환경적인 영향에 대해서도 안정한 것으로 판명되었다.