• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.6
• /
• pp.103-110
• /
• 1997

A performance prediction method is presented for single(double) suction centrifugal pumps with a review of loss correlations given in the previous open literature. Most of the loss analyses mentioned in the present study are one dimensional and this paper investigates several modeling schemes and shows that a fairly good prediction can be achieved by a proper selection of the most important flow parameters resulting from a mean streamline analysis. Predictions of the trends of total head- capacity and pump efficiency-capacity curves agree well with the experimental data in almost the full range of operating conditions. The prediction method developed through this study can serve as a tool to ensure good matching between parts and it can assist the understanding of the operational characteristics of general purpose centrifugal pumps.

• Journal of Advanced Marine Engineering and Technology
• /
• v.13 no.1
• /
• pp.69-76
• /
• 1989

This paper presents a method of the optimum design for rotating shaft of centrifugal pump. That is, the object is to optimize the system in stability at the operating speed, unbalance response in the vicinity of the rotor critical speed, leakage flow of the seals. The objective function is composed of these three elements and is minimized by changing seal cleareance, diamoters, and lengths. A typical double suction centrifugal pump is analyzed and its objective function is presented. Then the optimum dimensions of seals are obtained, and vibration characteristics at both initial and optimum conditions are investigated.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.144-147
• /
• 2008

Intake pump for waterworks is badly damaged by a small amount of cavitation because of variable water quality and severe operation conditions. In general, the required NPSH for reduced cavitation can be provided by inlet condition, supply air, change pump and inducer. But once the pump has been built and installed there is little that can be done to reduce cavitation damage. In this study, we analysed the cavitation of paldang intake pump and intended to avoid the same phenomena.

• International Journal of Fluid Machinery and Systems
• /
• v.8 no.2
• /
• pp.94-101
• /
• 2015

To investigate the influence of blade profiles on cavitation behavior in impeller of centrifugal pump, a centrifugal pump with five different blade profiles impellers are studied numerically. The impellers with five different blade profiles (single arc, double arcs, triple arcs, logarithmic spiral and linear-variable angle spiral) were designed by the in-house hydraulic design code using geometric parameters of IS 150-125-125 centrifugal pump. The experiments of the centrifugal pump have been conducted to verify numerical simulation model. The numerical results show that the blade profile lines has a weak effect on cavitation inception near blade inlet edge position, however it has the key effect on the development of sheet cavitation in impeller, and also influences the distribution of sheet cavitation in impeller channels. A slight changing of blade setting angle will induce significant difference of cavitation in impeller. The sharp changing of impeller blade setting angle causes obvious cavitation region separation near the impeller inlet close to blade suction surface and much more flow loss. The centrifugal pump with blade profile of setting angle gently changing (logarithmic spiral) has the super cavitation performance, which means smaller critical cavitation number and lower vapor cavity volume fraction at the same conditions.

• Journal of Energy Engineering
• /
• v.9 no.2
• /
• pp.89-94
• /
• 2000

양흡입 펌프 회전차 내부 유동특성을 수치적으로 고찰하였다. 수치계산은 설계점과 2개의 탈설계점에서 이루어졌으며, Patankar에 의해 제시된 SIMPLE 알고리즘을 이용하였다. 설계점에서는 양 회전차 채널 내부에서 대칭 형상을 갖는 이차유동 특성을 발견하였지만, 탈설계점에서는 비대칭 유동특성을 발견하였다. 수치해석 결과로는 유량감소에 따라 양흡입 펌프 회전차 채널내부의 이차유동 특성이 달라진다는 사실을 고찰하였다. 또한 양흡입 펌프 회전차 단면에는 모퉁이 와류가 존재함을 알 수 있었다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.6
• /
• pp.409-415
• /
• 2016

In this study, we test the effects of the surface roughness on the hydro efficiency of double-suction centrifugal pumps ($Q=70.7m^3/min$, H = 87 m). The original surface of the impeller and inner casing were coated, resulting in surface-roughness reductions ranging from $100{\sim}110{\mu}m$ to $0{\sim}0.08{\mu}m$. We conducted experimental studies to measure the efficiency of the pumps and operating-pump electro energy variations with different surface roughness values. The experimental results showed that the efficiency of the pumps increased by about 0.8~1.79% and the electric energy of the operating pump was reduced by around 4.38 ~ 6.08%. These results indicate that the performance of the pumps depend largely on the surface roughness of the impeller and inner casing, and by reducing the surface roughness, we can improve the efficiency of the pump and reduce costs by reducing the electric energy consumption.

• Journal of Advanced Marine Engineering and Technology
• /
• v.10 no.4
• /
• pp.31-40
• /
• 1986

With the tendency toward high speed and high pressure in centrifugal pumps, the problem of sub-synchronous vibration has arisen, caused by the hydraulic forces of the working fluid, such as wearring, balance piston, impeller, etc.. These forces can drastically alter the rotor critical speeds and stability characteristics, and can be acted significant destabilizing forces. For preventing such self-excited vibration, the desing of the rotor system needs, which would secure the stability of the machine. In this paper, a procedure is presented for dynamic modeling of rotor-bearing-seal-impeller systems which consist of rigid disks, distributed parameter finite rotor elements and discrete bearings, seals and impellers. A finite element model including the effects of rotatory inertia and gyroscopic moments is developed using the consistent matrix approach. The technique of dynamic matrix reduction is applied to the shaft matrices to reduce them to a set of matrices of dynamic of significantly fewer degrees of freedom. The representation of bearing, seal and impeller elements is in term of linearized stiffness and damping matrices by reasonably small perturbations from equilibrium. The stability behavior of a typical double suction centrifugal pump is presented. Results show the influence of clearance and flow conditions on running speeds and stability characteristics.

• Journal of KSNVE
• /
• v.10 no.1
• /
• pp.153-159
• /
• 2000

This paper presents a new method for including the dynamic stiffness of the stationary parts in rotordynamic analysis. As a consequence of the support dynamics, critical speeds are varied and/or additional critical speeds are introduced. Therefore, dynamic effects of the support are often significant in high speed turbomachinery, but most of analysis has considered the support as a rigid body or a simple structure. The proposed method is based on the coupled characteristics of the driving point and transfer frequency response functions of the support system to model the equivalent spring-mass series in finite element analysis. To demonstrate the applicability of the simulation procedures provided, it is applied to the rotor model of the double suction centrifugal pump. Results of the suggested equivalent-support rotor model including coupled effects agree well with the entire pump model.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.8 s.179
• /
• pp.1931-1939
• /
• 2000

Operating excitation forces of the linear vibratory system are normally determined by direct measurement techniques using load cells, strain gauges, etc. But, hydraulic forces of the rotating turbomachinery such as centrifugal pumps are exerted on an impeller due to asymmety of the flow by the interaction between pump impeller and volute. So, investigations of wide range of hydraulic designs and geometric deviations are difficult by direct method. This paper presents a hybrid approach for fourier transformed operational excitation forces, which uses pseudo-inverse matrix of the transfer matrix for the system and the measured vibrational data with standard installed pump. The determination of the transfer function matrix is based on a linear rotor/stationary system and steady state harmonic response in finite element analysis. And, vibrational data is collected in both vertical and horizontal directions at inboard and outboard bearing housings. The results of the process may be enhanced by making acceleration measurements at many more locations than there are forces to be determined.

• Journal of Advanced Marine Engineering and Technology
• /
• v.16 no.5
• /
• pp.39-49
• /
• 1992

The dynamic design object of rotor system is to optimize the system in stability at the operating speed, unbalance response in the vicinity of the rotor critical speed, bearing weighting and system weighting. In conventional optimization method, designers have to set mathematical modeling, such as objective function, constraints and design parameters, strictly and quantitavely. But in actual design process, they do not treat all of these values strictly and some of them are somehow "fuzziness". So, considering boundary conditions of seal diameter, clearance, and length in a typical double suction centrifugal pump is fuzzy, this paper is considered fuzzy in constraints. Fuzzy method is used .alpha.-level cut method. Then, the optimum dimensions of seal according to values are obtained and vibration characteristics are investigated.estigated.