• 전기학회논문지
• /
• 제60권4호
• /
• pp.746-752
• /
• 2011

In this paper, a novel bearingless switched reluctance motor (BLSRM) with double stator is proposed. This motor has two stators. Torque stator is outside, which mainly produces rotational torque. Radial force stator is inside, which mainly generates radial force to suspend the rotor. A novel structure and operating principle are presented. And characteristics of the proposed structure such as magnetic flux distribution, inductance, torque and radial force are analyzed through finite element method. From the analysis, the proposed BLSRM has linear characteristic of radial force and independence from torque current.

• Journal of Electrical Engineering and Technology
• /
• 제9권4호
• /
• pp.1315-1323
• /
• 2014

Although the power density in Double Stator Switched Reluctance Motor (DSSRM) has been improved, the torque ripple is still very high. So, it is important to reduce the torque ripple for specific applications such as Electric Vehicles (EVs). In This paper, an effective rotor shaping optimization technique for torque ripple reduction of DSSRM is presented. This method leads to the lower torque pulsation without significant reduction in the average torque. The method is based on shape optimization of the rotor using Finite Element Method and Taguchi's optimization method for rotor reshaping for redistribution of the flux so that the phase inductance profile has smoother variation as the rotor poles move into alignment with excited stator poles. To check on new design robustness, mechanical analysis was used to evaluate structural conformity against local electromagnetic forces which cause vibration and deformation. The results show that this shape optimization technique has profound effect on the torque ripple reduction.

• Journal of Electrical Engineering and Technology
• /
• 제8권4호
• /
• pp.766-772
• /
• 2013

Modeling and control of radial force in the double stator type bearingless switched reluctance motor (BLSRM) is researched. The rotational torque is controlled independently from the radial force control. And the radial force is constant which is independent from the rotor position. In order to realize steady suspension, analytical models of torque and radial force for the proposed structure are derived. Meanwhile, in order to realize steady suspension, control scheme for proposed BLSRM is proposed. In the control method, the radial force can be controlled in arbitrary direction and magnitude by selecting some combinations of radial force windings. The validities of structure and control method are verified by the experimental results.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권2호
• /
• pp.38-45
• /
• 2012

A novel kind of switched reluctance motor (SRM) with short flux path is proposed in this paper. Phase excitation in the SRM gives short flux paths, hence reducing the magnetomotive force required to drive the machine, resulting in significant reduction of copper wire and core losses compared to the typical SRM with diametric circulation of magnetic flux. To verify the performance, the characteristics analysis of a double-stator SRM, a 6/5 SRM with C-core structure, and a 4/5 two-phase SRM, which all have short flux paths, and a comparison with conventional SR motors are executed. The comparison demonstrates that the proposed motor offers some advantages in terms of torque and efficiency.

• 전기학회논문지
• /
• 제66권12호
• /
• pp.1866-1872
• /
• 2017

This paper presents the design of in-wheel type Switched Reluctance Motor (SRM) which can be used as both traction motor and power pickup device in a wireless charging system of electric vehicles. The SRM acts as a traction drive in driving mode and a power receiver in charging mode to avoid any additional weights. Double stator axial field SRM is used due to its structure that can be mounted inside the wheel. The charging circuit is integrated with the asymmetric converter and phase windings of SRM, reducing the cost and size of the system. Magnetic resonance is implemented to increase the efficiency. Simulations done in Maxwell and Simplorer verify the effectiveness of the proposed system.

• 한국정보통신학회논문지
• /
• 제20권1호
• /
• pp.131-141
• /
• 2016

SRM은 저비용, 간단한 자기구조, 넓은 운전속도, 높은 효율, 직류전원과의 우수한 결합성 등의 장점을 가진 전동기구이다. SRM의 토오크는 자속의 방향과는 무관하여 자기구조의 배치가 유연한 특성을 가지고 있어 다양한 자기구조를 가지고 있다. 본 논문에서는 자속방향에 따라 Radial-Flux SRM와 Axial-Flux SRM로 크게 나누었고 기계적인 구조의 차이에 따라 Radial-Flux SRM에는 Conventional, Segmented stator and rotor, Double stator SRM 로, 그리고 Axial-Flux SRM에는 C-core stator와 Axial-airgap SRM로 분류하였고 각각에 대해 비교 해석하여 적절한 용도에 최적의 자기구조를 선택할 수 있도록 각각의 기본적인 특성을 제시하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.81-82
• /
• 2012

A novel kind of switched reluctance motor (SRM) with short flux path is proposed in this paper. Phase excitation in the SRM gives short flux paths, hence reducing the magnetomotive force required to drive the machine, resulting in significant reduction of copper wire and core losses compared to the typical SRM with diametric circulation of magnetic flux. To verify the performance, the characteristics analysis of a double stator SRM, a 6/5 SRM with C-core structure and a 4/5 two-phase SRM which all composed of short flux path and a comparison with conventional SR motors are executed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.887-888
• /
• 2006

Switched Reluctance Motor(SRM) is rotated by reluctance force generated between rotor pole and stator pole. So SRM must be switched by exciting current according to rotor position. but SRM takes the advantages of high speed driving and very simple structure. The single phase SRM can not be start by itself and torque ripple is generated more than multi-phase SRM. But mechanical structure and driver is simpler than multi-phase SRM. The single phase SRM driver is composed with the absolute encoder and DSP to control exciting section and current, and is supplied by constant voltage. So The paper is intend to measure the speed charactrer of double silent pole type SRM by using the unipolar driving curcuit.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 전력전자학술대회
• /
• pp.146-147
• /
• 2017

본 논문은 새로운 구조의 이중 고정자 횡축 12/10 Switched Reluctance Motor(SRM)을 설계에 관한연구이다. 자동차 냉각팬에 적용하기 위해 Conventional 12/8과 Single Stator AF(Axial Field) SRM이 검토되었다. Axial Field의 장점은 기존의 방사형 보다 짧은 자속 경로를 가져 높은 토크와 효율을 가지지만 Single Stator AF SRM은 하나의 고정자와 회전자로 이루어져 있어 편심등 기구적으로 불안정하다는 단점이 있다. 이중 고정자 횡축 12/10 SRM은 두 고정자 사이에 회전자가 위치에 있어 Single Stator AF의 단점을 보안 할 수 있으며, 전기적인 특성 및 영향을 검토하기 위해 유한요소해석(FEA)을 수행하였다.

• 전력전자학회논문지
• /
• 제6권2호
• /
• pp.202-208
• /
• 2001

스위치드 리럭턴스 모터(Switched Relutance Motor : 이하 SRM)는 이중 돌극형으로 되어있으며, 상권선은 고정자만 사용한다. 다른 어느 전동기보다도 간단한 구조를 가지고 있어 제작단가가 저렴하고, 기계적으로 견고하며, 고온 등의 열악한 환경에서도 신뢰성이 높으며, 브러쉬 등이 없어 유지비가 거의 들지 않는 장점을 지니고 있다. 그러나 SRM은 상여자를 위하여 회전자의 위치정보를 알아야하므로 위치 검출기가 필요하고, 정속도 운전을 위하여 타코 발전기나 엔코더가 부가적으로 필요하다. 그러나 본 논문에서는 회전자의 속도측정을 얻기 위하여 고가의 엔코더를 사용하지 않고, 단지 간단한 슬롯 디스크로부터 위치를 검출하여 속도를 추정할 수 있는 알고리즘을 제시하고 개발하였다. 속도 추정 알고리즘을 적용한 가변속 디지털 제어시스템을 구현하기 위하여 TI사의 TMS320F240-20MIPS 고정 소수점 연산용 프로세서를 사용하였다. 개발한 시스템을 실험한 결과 넓은 범위에 걸쳐 속도제어가 가능하였고, 단일 펄스모드, 하드 쵸핑모드 및 소프트 쵸핑모드 뿐만 아니라, 전류제어 동작모드에서 가변속 제어가 가능하였다. 그리고 어드밴스각 제어가 가능하였다.