• 한국농공학회지
• /
• 제30권2호
• /
• pp.82-94
• /
• 1988

The purpose of this study is to introduce the Double Punch test method which is an indirect testing method of tensile strength of concrete, and to compare with the tensile strength of concrete as determined by the split-cylinder test, a practical method for performing the Double Punch test to obtain the tensile strength of concrete is proposed and recommended for general use. In this study, the dimensions of cylindrical specimens used in the Double-Punch test were 15X30cm, 15X15cm, 10${\times}$(20cm, and 5${\times}$l0cm, and in the split-cylinder test were 15${\times}$(30cm, 15${\times}$(15cm, and 10${\times}$(20cm. And the diameters of loading punches used in the Double-Punch test were 1.5cm, 2.5cm, and 3.5 cm. The results obtained from tests are summarized as follows ; 1. In the split-cylinder test, the tensile strength of concrete by the linear elasticity theory is similar to that of plasticity theory. 2. Both split-cylinder test and Double-Punch test, tensile strength of concrete is increased with decreasing specimen size. This tendency is identical when the ratio of specimen diameter to height is 1: 2, but that tendency is quite different when the ratio is 1: 3. In the Double-Punch test, if specimen size is constant, by increasing the punch size, tensile strength of concrete is increased, too. 4. Using a 15 ${\times}$( 15 cm cylinder specimen and 3.5 cm diameter punch in the Double Punch test would give the most uniform and consistent result in tensile strength, and the result showed a gQod correlation with splitting tensile strength from 15 x 30cm specimen. 5. In order to obtain satisfactory results and to nuninuze variability, it is proposed that specimens of 15 cm in diameter and 15 cm in height with two 3.5 cm diameter punches should be used. It seems, therefore, reasonable tt) take f't=0.0024 P(kg / cm$^2$) as a working formula for computing the tensile strength in the Double Punch test for concrete.

• 한국터널지하공간학회 논문집
• /
• 제14권3호
• /
• pp.247-260
• /
• 2012

TBM 터널 세그먼트의 철근량을 감소시키기 위한 연구로서, 강섬유 보강콘크리트의 사용이 시도되고 있다. 이와 같은 터널 세그먼트에는 철근의 감소로 인해 필요한 인장성능의 확보를 위하여 숏크리트에 사용되는 강섬유에 비해 매우 높은 형상비의 강섬유를 활용하는 것이 필요하다. 본 연구에서는 강섬유의 형상비가 80인 강섬유 콘크리트의 인장특성을 휨시험과 Double Punch Test를 통해 평가하였다. 휨시험결과, 사용된 강섬유의 충분한 부착강도로 인해 30%~150%의 강도 증진을 나타냈으며, 오영훈(2008)의 예측식을 통한 휨인장강도예측이 가능한 것으로 판단된다. 이 실험을 근거로 설계에 필요한 직접인장강도를 ACI와 RILEM의 식에 의해 평가한 결과, 적용기준에 따라 큰 차이가 있는 것으로 나타났다. 또한, DPT 실험을 통해 RILEM에서 권고하고 있는 직접인장강도의 정밀도 있는 예측이 가능한 것으로 판단된다.

• 한국건설순환자원학회논문집
• /
• 제10권1호
• /
• pp.40-47
• /
• 2022

본 연구에서는 전자기장을 이용하여 일반몰탈과 스틸슬래그 몰탈 내부에 혼입되는 강섬유의 방향을 원주방향으로 배열시켰으며, 성능변화를 확인하기 위하여 Double Punch 실험을 수행하였다. 실험결과, 전자기장을 이용하여 강섬유를 원주방향으로 배열하는 것이 가능한 것으로 확인되었다. 전자기장 노출로 인한 강섬유의 배열조정에 따라 인장강도와 파괴 시 변형도 유의미한 증가를 보였다. 반면 파괴에너지는 거의 증가하지 않았다. 전자기장이 영향을 미쳐 강섬유의 배열이 조정되는 구간이 크지 않은 문제와 사용한 강섬유가 직선으로 되어 있어 균열성장을 억제하는데 한계가 있었던 것으로 판단된다. 이와 같은 문제를 보완한 추가연구가 필요하다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.195-198
• /
• 2006

Zinc phosphate coating is required in nearly all steel cold forging operations. However, the chemical byproducts of this lubricant system are difficult to dispose of and have a negative environmental impact. In order to replace zinc phosphate based lubricants partially or completely, candidate lubricant has been developed in this study. The performance evaluation of these lubricants was conducted using the double cup extrusion test and spike forging test. With the use of the commercial FEM code DEFORM, friction factor calibration curves, i.e. cup height ratio vs. punch stroke and spike height vs. punch stroke, were established for different friction factor values. By matching the cup height ratio and the punch stroke and spike height vs. punch stroke from experiment to that obtained from FE simulations, the friction factor of the lubricants was determined. Three water-soluble lubricants; namely, Mec Homat, Royalcoat, and the developed lubricant were found to perform comparable to or better than zinc phosphate.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.149-154
• /
• 2007

The zinc prosphate film treatments used to lubricating treatment of mostly cold forging processes. But there are several problems happened to lubricating treatment process such as happening harmful environment on person, complex lubrication processing occurring in energy and time consumption, eco-destructive and chemical by-product generation, the needs of waste disposal etc. As a result, a water-soluble lubricant was developed to replace the perfect or some of the zinc prosphate film in the world. In order to solve these problems, this study evaluated the performance of the typical water-soluble. In this study, for these requirement inquiry of two part. First, about possibility of replace zinc phosphate lubricant, quantitatively evaluation developed of water-soluble lubricant for cold forging vs zinc phosphate lubricant. Second, About optimization of coating Process use to equipment with practicable automatic coating Process. The performance evaluation of these lubricants was conducted using the double cup extrusion test and spike forging test. With the use of the commercial FE code DEFORM, friction factor calibration curves, i.e. cup height ratio vs. punch stroke and spike height vs. punch stroke, were established for different friction factor values. By matching the cup height ratio and the punch stroke and spike height vs. punch stroke from experiment to that obtained from FE simulations, the friction factor of the lubricants was determined. Survey of comparative analysis use to SEM that sprayed lubricant surface structure of grain shape and characteristic of lubricant performance based on grain shape and deformed lubricant surface expansion. As a result, developed lubricant were found to perform comparable to or better than zinc phosphate. And thought this result, innovatively cope with generated problem of existing lubrication process.

• 한국터널지하공간학회 논문집
• /
• 제15권1호
• /
• pp.1-11
• /
• 2013

강섬유 보강콘크리트는 NATM 터널의 숏크리트와 세그먼트 등 라이닝에 주로 적용된다. 터널화재시 라이닝은 화재에 직접적으로 노출되기 때문에 고온노출시 SFRC의 성능변화는 매우 중요하다. 본 연구에서는 고온에 노출된 강섬유보강콘크리트의 인장성능을 DPT 실험을 통하여 검토하였다. 고온 노출온도, 강섬유 혼입률 및 종류가 파괴형태, DPT 인장강도, 실험의 변동계수에 미치는 영향을 분석하였다. 실험결과, 강섬유 보강으로 인한 잔존인장강도의 증가를 확인하였으며, 혼입률이 증가할수록 효과적임을 확인하였다. 그러나, DPT 인장강도는 고온노출로 인한 파괴면의 변화를 고려할 수 없기 때문에 파괴에너지의 고찰이 필요한 것으로 판단된다.

• 대한전자공학회논문지
• /
• 제21권5호
• /
• pp.67-78
• /
• 1984

프로팅 게이트 위에 컨트롤 게이트를 갖는 n-채널 이중 다결정 실리콘게이트 EAROM을 제작하였다. 채널 길이는 4-8μm, 채널 폭은 5-14μm로 하여 5μm design rule에 따라 설계하였으며 서로 다른 4가지 컨트롤게이트 구조를 갖는 채널 주입형 기억소자를 얻었다. 그리고 소자의 Punch through 전압과 게이트에 의해 조절되는 채널파괴 전압을 증가시키기 위해 이중 이온주입 (double ion implantation)과 active 영역에 보론이온을 주입 하였다. 프로그래밍을 위해 드레인 전압 및 게이트 전압이 각각 13-l7V 및 20-25V 정도 필요하였다. 그리고 제조된 기억소자의 소거는 광학적 방법뿐 아니라 전기적 방법으로도 가능하였으며 125℃에서 200시간 유지하였을 때 축적된 전자가 약 4 %정도 감소함을 알 수 있었다.

• Computers and Concrete
• /
• 제20권1호
• /
• pp.39-47
• /
• 2017

In this paper, mode I fracture toughness of rock was determined by direct and indirect methods using Particle Flow Code simulation. Direct methods are compaction tension (CT) test and hollow centre cracked quadratic sample (HCCQS). Indirect methods are notched Brazilian disk (NBD) specimen, the semi-circular bend (SCB) specimen, hollow centre cracked disc (HCCD), the single edge-notched round bar in bending (SENRBB) specimen and edge notched disk (END). It was determined that which one of indirect fracture toughness values is close to direct one. For this purpose, initially calibration of PFC was undertaken with respect to data obtained from Brazilian laboratory tests to ensure the conformity of the simulated numerical models response. Furthermore, the simulated models in five introduced indirect tests were cross checked with the results from direct tests. By using numerical testing, the failure process was visually observed. Discrete element simulations demonstrated that the macro fractures in models are caused by microscopic tensile breakages on large numbers of bonded discs. Mode I fracture toughness of rock in direct test was less than other tests results. Fracture toughness resulted from semi-circular bend specimen test was close to direct test results. Therefore semi-circular bend specimen can be a proper test for determination of Mode I fracture toughness of rock in absence of direct test.